Assembly Instructions
ITEM: N711P244890/N711P244891
Important Note
Important Note:
- Place all parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Before you begin, please review the assembly instruction step by step.
Return & Warranty policy:
- We strive to offer the highest quality products. We also provide positive solutions with replacements or refund if needed.
- If the item is damaged or defective, please take photos to show the problem and email to the seller.
- Please do not return back the products before contacting the seller.
Part List
The following parts are included in the assembly:
Box 1: N711P244890
- D: (2 Pieces)
- E: (2 Pieces)
- F: (1 Piece)
- G: (4 Pieces)
- H: (1 Piece)
- I: (2 Pieces)
- J: (2 Pieces)
- K: (2 Pieces)
- L: (2 Pieces)
- M: (2 Pieces)
- N: (2 Pieces)
- O: (1 Piece)
- Q: (1 Piece)
- X: (2 Pieces)
- Z: (2 Pieces)
- W: (8 Pieces)
Box 2: N711P244891
- A: (1 Piece)
- B: (1 Piece)
- C: (4 Pieces)
- P: (2 Pieces)
- R: (4 Pieces)
Hardware List: N711P244891
- 1: Washer (ø16*1: 94 Pieces)
- 2: Screw (M6x20: 66 Pieces)
- 3: Screw (M6x30: 18 Pieces)
- 4: Screw (M6x40: 40 Pieces)
- 5: Screw (M6x55: 2 Pieces)
- 6: Washer (ø23*1: 8 Pieces)
- 7: Screw (M8x40: 8 Pieces)
- 8: Bracket (4 Pieces)
- 9: Bracket (5 Pieces)
- 10: Nut (2 Pieces)
- 11: Cotter Pin (1 Piece)
- 12: Allen Wrench (2 Pieces)
Assembly Steps
Step 1
Attach part A (1 piece) and part B (1 piece) using 2x hardware 1 and 2x hardware 4. Use the Allen wrench to tighten.
Step 2
Attach 2x part D and 2x part E to the assembled base. Use 8x hardware 1 and 8x hardware 4 for this step.
Step 3
Continue assembling the frame. Use 2x hardware 1, 8x hardware 1, and 8x hardware 4.
Step 4
Attach part H (1 piece) and part F (1 piece) to the frame. Use 6x hardware 1 and 6x hardware 4.
Step 5
Install the support bars. Attach 4x part G using 8x hardware 1, 4x hardware 2, 2x hardware 5, and 2x hardware 10. Secure with 1x hardware 11.
Step 6
Add more support. Attach 8x part W using 16x hardware 1, 8x hardware 2, and 8x hardware 4.
Step 7
Secure the structure further. Use 18x hardware 3, 4x hardware 8, and 5x hardware 9.
Step 8
Place the top panels. Attach 2x part C using 8x hardware 2.
Step 9
Attach the side panels. Use 2x part R, 4x hardware 6, and 4x hardware 7.
Step 10
Continue attaching the top panels and side supports. Use 2x part C, 2x part R, 8x hardware 2, 4x hardware 6, and 4x hardware 7.
Step 11
Assemble the vertical supports. Connect 2x part K, 2x part L, 2x part M, and 2x part J. Use 18x hardware 1 and 18x hardware 2.
Step 12
Attach the vertical supports to the frame. Connect 2x part J, 2x part K, and 2x part X, 2x part Z. Use 8x hardware 1 and 8x hardware 4.
Step 13
Install the remaining vertical supports. Connect 2x part L and 2x part M. Use 8x hardware 1 and 8x hardware 2.
Step 14
Add the top crossbars. Attach 2x part N. Use 8x hardware 1 and 8x hardware 2.
Step 15
Attach the top panel. Use 1x part Q, 4x hardware 1, and 4x hardware 2.
Step 16
Prepare for the final step.
Step 17
Attach the final panels. Use 2x part P.
Step 18
Complete the assembly by attaching the top piece. Use 1x part O.
Made in Viet Nam
