Minew MBT02 Asset Tag Datasheet
Stock Code: 872374
1. Brief Introduction
The MBT02 is a portable asset tag developed by Minew. It features a light-up or ring function and is equipped with an imported Bluetooth® 5.0 chip and a 500 mAh battery, enabling low-power information broadcasting and a service life of at least 2 years. By integrating with Minew's gateway and V3 management platform, users can perform one-click operations such as parameter configuration, OTA upgrades, and light or ring commands. This facilitates batch management of tags and allows users to quickly locate assets in large warehouses, thereby improving search efficiency.
2. Key Features
- Portable Design
- 2 Years Service Life
- 100 m Broadcasting Distance
- Sound or Light Reminding
- Batch Management Platform
3. Market Applications
- Smart Warehouse
- Smart Logistic
- Smart Office
4. Application Scenarios
Asset Safety Management
The MBT02, equipped with an anti-tamper switch, can be deployed on important assets in museums and stores for asset protection management, reducing asset loss. When combined with Geo-fence technology, if an item with an MBT02 tag is maliciously moved from a specified area or tampered with, the manager receives an alarm and can take prompt action.
Smart Warehouse Management
The MBT02 can be deployed on important assets within a warehouse, such as shelves and handling tools. Utilizing the G1 gateway and the cloud-based tag management platform, users can achieve batch product operation instructions. For instance, a user can send a light or ring command via the platform to quickly locate specific items and enhance search efficiency.
5. Device Specifications
Basic Parameters
| Item | Value |
|---|---|
| Material | ABS |
| Color | White (customizable) |
| Dimensions (L*W*H) | 56*34.5*7.2mm |
| Weight | 17g |
| Protection | IP65 |
| Battery | CR Button Series, 500mAh |
| Battery Lifetime | 2 years (by default setting) |
| Chip Model | nRF52 Series |
| Configuration App | BeaconSET + |
| Sensors | Accelerometer Optional |
| OTA | Yes |
| LED | Red |
| Operating Temperature | -20°C~60°C |
Broadcast Parameters (V3 Firmware)
| Frame | Items | Default Setting |
|---|---|---|
| iBeacon (On) | UUID(16bytes) | E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (customizable) |
| Major(2bytes) | 0 (0-65535, customizable) | |
| Minor(2bytes) | 0 (0-65535, customizable) | |
| Measured power | -59dBm(0xC5) | |
| Tx power | 0dBm | |
| Interval(ms) | 2000ms | |
| DEVICE INFO (On) | Device Name | MBT02 |
| Battery Level | By default | |
| MAC Address | Factory Setting | |
| Tx power | -8dBm | |
| COMBINATION (On) | Interval(ms) | 5000ms |
| Tx Power | 0 dBm | |
| Password | Intervals(ms) | 5000ms |
| Password | minew123(by default) | |
| Connectable | Connectable or not | Yes |
6. Product Appearance
[Image description: Two views of the MBT02 asset tag. The left image shows a smooth, rounded rectangular tag. The right image shows the same tag with a small button and an LED indicator visible on its surface.]
7. Device Operation
- Power-on: Press the button for 3 seconds until the red light turns on.
- Power-off: Use the “shut-down” command via the platform; the red light will flash 5 times.
Remark: Functions such as light-up, parameter updates, and battery information can be controlled or viewed through the platform. For detailed operation instructions, please contact the Minew sales or technical support team.
8. Installations
Methods:
Double-side adhesive tape
Details:
Double-side adhesive notes:
- Recommended Installation Environment: The material surface should be suitable, including Aluminum, galvanized steel, enamel steel, stainless steel, ceramic, glass/epoxy resin, acrylic, PBT, ABS, PC, hard PVC, etc.
- Requirements: Ensure the material surface is clean and free of dust before installation. For optimal adhesion, apply gentle heat with a hairdryer or maintain pressure for several minutes at a reasonable temperature, repeating if necessary for better stability.
9. Cautions
- To turn the device on, press the button three times sequentially until the blue light illuminates. To turn it off, use the shut-down command on the BeaconSET+ APP; the blue light will flash multiple times.
- Avoid frequent disassembly of the device to maintain the performance of the anti-tamper button.
- Reducing power consumption and increasing the broadcasting interval can extend the battery life of BLE tags when used in appropriate environments.
- The device will be shut down for shipping purposes.
- Ensure the device is used within the suggested working temperature range for safety.
- Minew is not liable for any damage caused by product disassembly.
10. FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.
11. Quality Assurance
The factory has obtained ISO9001 Quality System certification. Each product undergoes rigorous testing, including transmission power, sensitivity, power consumption, stability, and aging tests.
Warranty Period: 12 months from the date of shipping (Battery and other accessories excluded).
12. DECLARATION
Rights Statement
The contents of this manual belong to Shenzhen Minew Technologies Co., LTD, and are protected by Chinese laws and applicable international conventions related to copyright laws. The contents may be revised by the company according to technological advancements without prior notice. Unauthorized modification or citation of this manual's contents by any individual, company, or organization is prohibited, and violators will be held accountable by law.
Disclaimer
Minew reserves the right to provide the final explanation regarding document and product differences. Minew is not responsible for property damage or personal injury resulting from incorrect operation if users develop related products without consulting the technical specifications in this manual.
13. Contact Information
Manufacturer: Shenzhen Minew Technologies Co., Ltd.
Phone: +86(755) 2103 8160
Email: info@minew.com
Address: No.8, Qinglong Road, Longhua District, Shenzhen, China
IoT Device Shop: BLE Beacon, Bluetooth LoRa Gateway Sensor
Minew Official Website | IoT Devices Manufacturer
