Minew Official Website | IoT Devices Manufacturer
IoT Device Shop: BLE Beacon, Bluetooth LoRa Gateway SensorMinew Official Website | IoT Devices Manufacturer
User Manual for MINEW models including: 2ABU6-MWC01, 2ABU6MWC01, MWC01, Bluetooth Rechargeable Badge, MWC01 Bluetooth Rechargeable Badge, Rechargeable Badge, Badge
Shenzhen Minew Technologies Co., Ltd. MWC01 2ABU6-MWC01 2ABU6MWC01 mwc01
File Info : application/pdf, 6 Pages, 546.47KB
DocumentDocumentProduct NameMWC01 Bluetooth® Rechargeable badge Product Pictures: Product Overview MWC01 is a rechargeable badge created by Minew for personnel management, which allows check-in/ out and flow monitoring. The charging port is magnetic that is easy to recharge. It is equipped with an external button and a vibration motor that is friendly to the visually impaired and can be used for first aid or status reports of the wearer. Key Features Smart magnetic charging Visual or auditory disability-friendly with vibration motor Multiple RFID frequencies 492 ft (150 m) broadcast distance Market Applications Personnel management With a broadcast distance of 492 ft (150 m) and a high level protection, MWC01 can be widely used in museums, aquariums and other large indoor places. Wearers' movement can be tracked so that resources can be efficiently allocated. External buttons are accompanied by vibration feedback. Functions such as first response in hospitals and task completion report in factories can be achieved with further development. Smart office MWC01with built-in RFID can be used for office check-ins, personnel flow monitoring, and employees' route tracing to human utilization.ts geofencing function allows access control as levels of permissions for different areas can be set. Such visitor management protects company privacy to the greatest extent possible. Product Specifications Basic Specifications Body material Color Size (L * W * H) Weight Battery ABS + PC White 86 * 55 * 6 mm 19 g ( without accessories ) 1 rechargeable battery, 290 mAh Charging time Approximate 2 hroom temperature5 V/ 1 A power adapter Battery life Up to 3 monthsless than average amount of clicking Sensor Accelerometer Button 1 Vibration motor 1 LED 1 RGB light RFID LF/ HF/ UHF optinal OTA Supported Configuration App BeaconSET+[1] [1] Bluetooth related SDKs are available, please contact our sales team for details. Technical Specifications Chip Bluetooth version Broadcast frequency Broadcast distance Working temperature Security nRF52 series Bluetooth® LE 5.0 100 ms ~ 5 s Up to 492 ft / 150 m (open area) -20 ~ 60 Password verification to change settings, restart, non-connectable mode, malicious connecting proof supported Broadcast Specifications Type (channel) Items Default settings iBeacon (on) UUID (16 bytes) E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (configurable) Major (2 bytes) 0 (0 65535, configurable) Minor (2 bytes) 0 (0 - 65535, configurable) Measured power -59 dBm (0xC5) @1 m Tx power 0 dBm Interval 900 ms UID (off) URL (off) TLM (on) INFO (on) ACC (on) Password Connectable mode Instance ID 00112233445566778899 (configurable) Namespace ID Random Measured power -24 dBm (0xE8) @0 m Tx power 0 dBm Interval 2000 ms URL https://www.minew.com/ (configurable ) Measured power -24 dBm (0xE8) @0 m Tx power 0 dBm Interval 2000 ms Electricity mV System built-in Boot up time System built-in PDU packets System built-in Tx power 0 dBm Interval 4000 ms Device name MWC01 Battery level System built-in MAC address Assigned at factory Tx power -8 dBm Interval 4000 ms Tx power 0 dBm Interval 1000 ms Password Connectable or not minew123 (default) connectable Compatibilities Supported systems Supported models iOS 10.0 and above Android 4.3 and above iPhone6 /6 Plus /6S/ 6S Plus /7 /7 Plus /8 /8 Plus /x /xr /xs /xs max /SE /SE2 /11 /11 pro /11 pro max LG, Samsung, Xiaomi, Huawei, Honor, OnePlus, Google Pixel, etc Instruction Boot After hold the button for 3 s, the blue light will be on for 3 s and vibrate once. Shutdown When on, you only can turn it off by the BeaconSET+ App. The blue light flashes 5 times means that it has been powered off. Battery level When the battery is lower than 20%, the red light flashes once every 3 s. When being charged, the red light remains on. When the charging is completed, the green light remains on. App connection and disconnection When connected the blue light will flash twice. When disconnected, the blue light will flash 3 times. Connectable mode MWC01 defaults to connectable mode and can be set to non-connectable mode after connecting the App. MWC01 can return to connectable mode after re-powering in non-connectable mode. Broadcast: Click the button once can enter the configurable mode in 1 minute. You can set click the button twice or three times to trigger a broadcast.When click the button twice, the blue light flashes twice and the motor vibrates once. When click the button 3 times, the blue light flashes 3 times and the motor vibrates 2 times. Precautions 1. When the power is low, the red-light will flash to give an alarm, and please replace the battery in time. 2. The use time and broadcast distance fluctuate due to the environment, and the specific time is subject to the actual use. 3. The product can only be immersed in water for a short time and does not support use underwater. 4. Do not use the product above the designed working temperature to avoid damage. 5. It is recommended that store the product under -20 to 40 while charge and discharge the product per 3 months during storage when not in use. 6. Avoid being exposed to direct sunlight for an extended period to mitigate shell aging. 7. Minew will not be responsible for any damage resulting from disassembling manually. Certifications FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Packaging information Details Inner carton External box Pictures Quantities Sizes Gross weight (with accessories ) 16 pcs 30.5 x 11 x 7.2 cm 0.57 kg 160 pcs 32 x 23.5 x 40 cm 6.2 kg Quality Assurance The factory has already obtained the certification of ISO9001 Quality System. Each product has been strictly tested (tests include transmission power, sensitivity, power consumption, stability, aging, etc.). Warranty Period: 12 months from the date of shipping (Battery and other accessories excluded). Declaration Statement of Rights: The contents of this manual belong to the Manufacturer of Minew Technologies Co., LTD, Shenzhen, and are protected by Chinese laws and applicable international conventions related to copyright laws. The contents can be revised by the company according to the technological development without prior notice. Anyone, companies, or organizations cannot modify the contents and cite the contents of this manual without Minew's permission, otherwise, Violators will be held accountable according to law. Disclaimer: Minew team reserves the right to the final explanation of the document and product differences. The Minew group is not responsible for liability of property or personal injury with the wrong operation if users develop related products without checking the technical specifications of this manual. FCC Requirement: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Contact Information SHENZHEN MINEW TECHNOLOGIES CO., LTD. +86 (755) 2103 8160 www.minew.com info@minew.com www.minewstore.com No.8, Qinglong Road, Longhua District, Shenzhen, China