Einhell GP-LS 18/28 Li T BL Cordless Pruning Shears

1) Off → Standby

To transition from Off to Standby mode, wait approximately 1 second. The device screen will display "ON-STANDBY-OFF".

2) Standby → On

Activate the device from Standby mode by performing a double-click action. The screen will display "ON-STANDBY-OFF".

3) Cutting Width Adjustment

Adjust the cutting width between 14mm and 28mm by pressing the adjustment button once ([1x]). The screen shows the selected width (e.g., "14MM" or "28MM") and "ON-STANDBY-OFF".

4) Off

The shears feature automatic and manual shutdown.

Automatic Shutdown:

• The device enters standby after 30 seconds of inactivity.
• Automatic shutoff occurs after 10 minutes of inactivity.

Manual Shutdown:

Press and hold the button for 3 seconds ([3 sec]) to manually switch off the device. This action also engages the start-up lock.

1) Off → Standby

Transition from Off to Standby mode by waiting approximately 1 second. The device screen will display "ON-STANDBY-OFF".

2) Standby → On

Activate the device from Standby mode with a double-click action. The screen will display "ON-STANDBY-OFF".

3) Off

The shears automatically enter standby after 30 seconds and shut off after 10 minutes of inactivity.

To manually switch off the device, press and hold the button for 3 seconds ([3 sec]). This also engages the start-up lock.