LG Magic Remote

ACCESSORIES

(Depending upon country)

• Magic Remote and Alkaline Batteries (AA)
• Owner's manual

INSTALLING BATTERIES

Please read this manual carefully.

1. Press the top of the battery cover, slide it back, and lift the cover as shown below.
2. To replace batteries, open the battery cover, replace alkaline batteries (1.5 V, AA) matching the positive (+) and negative (-) ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV.
3. To remove the batteries, perform the installation actions in reverse. Do not mix old or used batteries with new ones. Close the cover securely.

Open the battery cover to find the label.

Illustration showing battery compartment cover being opened and batteries inserted.

REMOTE DESCRIPTION

The remote control image shown may differ from the actual product. The order of description may differ from the actual product. Some buttons and services may not be provided depending on models or regions.

Button Key:

• [Power Symbol] (POWER)
• Number buttons
• [Dash Symbol] (-)
• [Guide Symbol] (GUIDE)
• QUICK ACCESS ***
• [More Actions Symbol] (••• MORE ACTIONS)
• AD/SAP **
• [Volume Up/Down Symbol] + - (VOL)
• [Voice Recognition Symbol] " " (Voice recognition)
• [Mute Symbol] (MUTE)
• [Channel Up/Down Symbol] ^ v (CH/P)
• [Home Symbol] (HOME)
• [Settings Symbol] (Q. Settings)
• Wheel (OK)
• [Up/Down/Left/Right Arrows] Δ ∇ ≪ ≫ (up/down/left/right)
• [Input Symbol] ** (INPUT)
• Streaming Service buttons: Red, Green, Yellow, Blue buttons
• [Control Buttons Symbol] ▷ || (Control buttons)
• MOVIES

** To use the button, press and hold for more than 1 second.

USING

1. How to register (pair) or deregister (unpair)

How to register (pair) the Magic Remote

To use the Magic Remote, first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.
2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

Illustration showing a hand holding the remote and pointing it at a TV screen.

How to deregister (unpair) the Magic Remote

Press and hold the [Home Symbol] (HOME) and [Guide Symbol] (GUIDE) buttons at the same time for five seconds, to unpair the Magic Remote with your TV.

Press and hold the [Guide Symbol] (GUIDE) button for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

Illustration showing a hand pressing the Home and Guide buttons simultaneously.

2. How to use

Shake the Magic Remote slightly to the right and left or press the [Home Symbol] (HOME), [Input Symbol] (INPUT), or [Settings Symbol] (Q. Settings) buttons to make the pointer appear on the screen.

(In some TV models, the pointer will appear when you turn the Wheel (OK) button.)

If the pointer has not been used for a certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear.

If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge of the screen.

The Magic Remote depletes batteries faster than a normal remote due to the additional features.

Illustration showing the remote being shaken and a hand moving the pointer to the edge of the screen.

SPECIFICATIONS

Supported LG TVs

• 2018 TVs / 2017 TVs
  - W8/G8/E8/C8/B8/A8/SK9*/SK8*/SK7*/UK9*/UK8*/UK7*
  - W7/G7/E7/C7/B7/SJ9*/SJ8*/SJ7*/UJ9*/UJ8*/UJ7*
  - UK6*/LK6*/LK5*/UJ6*/LJ6*/LJ5* (Please verify whether the TV supports Bluetooth)
• 2019 TVs
  - W9/E9/C9/B9/SM9*/SM8*/UM8*/UM7* (Please verify whether the TV supports Bluetooth)
• 2020 TVs
  - ZX/WX/GX/CX/BX/NANO9*/NANO8*
  - UN8*/UN7* (Please verify whether the TV supports Bluetooth)

* 2017 TVs can be used after their software has been updated.

* Not all models listed are supported in all countries.

* Models listed are subject to change without prior notice.