GoveeLife Smart Presence Sensor H5127
This document provides instructions and information for the GoveeLife Smart Presence Sensor, Model H5127.
Introduction
The GoveeLife Smart Presence Sensor H5127 is designed to detect human presence within a room, enabling smart home automation and energy saving. It integrates seamlessly with the Govee Home app and other compatible smart home ecosystems.
What's in the Box
- GoveeLife Smart Presence Sensor (H5127)
- Mounting Bracket
- Screws and Anchors
- User Manual
Product Overview
The sensor unit features a front-facing detection lens, a multi-color status LED indicator, and a reset button on the back. The LED provides visual feedback on the sensor's status.
Status LED Indicator:
- Solid Blue: Connected and operating normally.
- Flashing Blue: Connecting to Wi-Fi.
- Solid Red: Error or connection failure.
- Off: Power saving mode or disabled.
Specifications
| Feature | Detail |
|---|---|
| Model | H5127 |
| Detection Range | Up to 5 meters (16.4 ft) |
| Detection Angle | 120 degrees |
| Power Supply | 2 x AA Batteries (included) |
| Connectivity | Wi-Fi 2.4GHz (IEEE 802.11 b/g/n) |
| App Compatibility | Govee Home App (iOS & Android) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Dimensions | 70mm x 70mm x 25mm |
Installation and Setup
Follow these steps to install and set up your GoveeLife Smart Presence Sensor:
- Download the Govee Home App: Search for "Govee Home" in your device's app store (Apple App Store ? or Google Play Store ?) and install it.
- Prepare the Sensor: Open the battery compartment on the back of the sensor and insert the included 2 x AA batteries, observing correct polarity. Close the compartment.
- Add Device in App: Open the Govee Home app, tap the '+' icon to add a new device, and select "Smart Presence Sensor H5127".
- Connect to Wi-Fi: Follow the on-screen instructions to connect the sensor to your 2.4GHz Wi-Fi network. Ensure your phone is connected to the same network during setup. The LED will flash blue during connection.
- Mount the Sensor: Choose a suitable location. The sensor can be placed on a flat surface or mounted on a wall using the provided bracket and screws. For optimal detection, mount it approximately 1.5 to 2 meters (5-6.5 ft) high, facing the area you wish to monitor. Avoid placing it directly opposite heat sources or air vents.
- Configuration: Once connected, you can configure detection sensitivity, notification settings, and automation rules within the Govee Home app.
Mounting Diagram Description: A visual guide shows the sensor mounted on a wall using the bracket. The recommended height is indicated as 1.5-2 meters, with an arrow showing the 120-degree detection angle covering a typical room area.
Usage
The GoveeLife Smart Presence Sensor works by detecting motion and presence. It can trigger automations within the Govee Home app or other connected smart home platforms. For example, you can set lights to turn on when presence is detected or turn off when the room is empty to save energy.
Key Features:
- Real-time presence detection.
- Integration with Govee ecosystem and other smart home platforms.
- Customizable detection zones and sensitivity.
- Low battery notifications via the app.
- Energy saving capabilities.
Troubleshooting
If you encounter issues, try the following:
- Sensor Not Responding: Ensure batteries are correctly inserted and have sufficient charge. Check if the sensor is within Wi-Fi range. Try resetting the sensor by pressing the reset button on the back for 5 seconds.
- False Detections: Adjust the sensor's sensitivity settings in the Govee Home app. Ensure the sensor is not placed near heat sources, moving objects (like curtains in a draft), or direct sunlight which can cause false triggers.
- Connection Issues: Verify your Wi-Fi network is 2.4GHz. Restart your router and the sensor. Ensure the Wi-Fi password entered is correct.
- App Not Updating: Close and reopen the Govee Home app. Ensure your phone has a stable internet connection.
Safety and Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Keep the device away from water and extreme temperatures. Do not attempt to disassemble the device.
