Product Overview
The STRÅLA cord set is an accessory designed for use with various lamp shades. It includes a power cord, plug, and lamp holder.
Illustration of the STRÅLA cord set, showing the power cord with a plug and a lamp holder.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
- This is a seasonal use product, not intended for permanent installation or use.
- Do not use outdoors.
- Keep away from heat sources such as gas or electric heaters, fireplaces, candles, or similar.
- Do not secure the wiring with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or any wire.
- Unplug the product when leaving the house, going to bed, or if left unattended.
- This is an electrical product – not a toy!
- To avoid risk of fire, burns, personal injury, and electric shock:
- Do not let children play with the product. Keep out of reach of children.
- Use this product only for its intended purpose.
- Do not hang ornaments or other objects from the cord, wire, or light string.
- Do not close doors or windows on the product or extension cords, as this may damage wire insulation.
- Do not cover the product with cloth, paper, or any material not part of the product when in use.
- Polarized Plug: This product has a polarized plug (one blade is wider than the other) to reduce the risk of electric shock. It will fit in a polarized outlet only one way. If the plug does not fit fully, reverse it. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless the plug can be fully inserted. Do not alter or replace the plug.
- Overload Protection (Fuse): A blown fuse indicates an overload or short-circuit situation. If the fuse blows:
- Unplug the product from the outlet.
- Unplug any additional strings or products attached to it.
- Replace the fuse according to user servicing instructions (follow product marking for proper fuse rating).
- If the replacement fuse blows, a short-circuit may be present, and the product should be discarded.
- Read and follow all instructions provided with the product.
USE AND CARE INSTRUCTIONS
- Inspect the product carefully before using or reusing it.
- Discard any products with cut, damaged, or frayed wire insulation or cords, cracks in lampholders or enclosures, loose connections, or exposed copper wire.
- When storing the product, carefully remove it from its location (e.g., trees, branches, bushes) to avoid undue strain on conductors, connections, and wires.
- When not in use, store neatly in a cool, dry location protected from sunlight.
USER SERVICING INSTRUCTIONS
How to replace the fuse:
- Grasp the plug and remove it from the receptacle or outlet device. Do not unplug by pulling on the cord.
- Open the fuse cover. Slide the fuse access cover on top of the attachment plug towards the blades.
- Remove the fuse carefully.
- CAUTION: Risk of fire. Replace the fuse only with a 5amp, 125 Volt fuse provided with the product.
- Close the fuse cover. Slide the fuse access cover back into place.
CAUTION: Risk of fire. Do not replace the attachment plug. It contains a safety device (fuse) that should not be removed. Discard the product if the attachment plug is damaged.
SAVE THESE INSTRUCTIONS
Assembly Illustrations
The following illustrations provide guidance on assembly and installation:
Illustration 1: Shows a person looking confused at parts, followed by a thought bubble with a question mark, suggesting initial uncertainty.
Illustration 2: Shows a person holding a lamp holder and looking towards an IKEA store, implying seeking guidance or purchasing accessories.
Step 1: Illustrates attaching the cord set to a hanging hook or support.
Step 2: Shows securing the lamp holder by twisting a locking ring.
Step 3: Depicts installing a light bulb into the lamp holder and placing a lamp shade. A warning symbol [!] is present.
Important Distance Requirement
English: The distance between the surface of the bulb and the shade must be at least 30 mm.
French: La distance séparant l'ampoule de l'abat-jour doit être d'au moins 30 mm.
Spanish: La distancia entre la bombilla y la pantalla debe ser de 30 mm como mínimo.
Compatible Shades
The following part numbers are suitable shades for this cord set:
- 10563018
- 00563047
- 00563033
- 00563014
- 20563032
- 00563052
- 80563374
- 50563361
- 70563275
- 50563281
- 20563367
- 50563380
