Introduction
This guide provides essential information for the correct installation of your Miele washing machine. Proper installation ensures safe operation, optimal performance, and longevity of the appliance. Please follow these instructions carefully to avoid potential hazards and damage.
Key Installation Steps
- Installation Surface: A stable, level concrete floor is recommended for optimal vibration reduction. If installing on a wooden floor, use a plywood base.
- Transporting the Machine: Ensure the lid is secure before moving the appliance. Carry it by the front feet and the lid.
- Transit Bars: Learn how to safely remove and store transit bars to prevent damage during operation.
- Levelling: Correctly level the machine using the adjustable feet to ensure stable operation and prevent excessive noise or movement.
- Water Connection: Connect to a potable cold water supply in accordance with local and national safety regulations. Ensure the water pressure is within the specified range.
- Drainage: Various drainage options are provided, including connection to a laundry trough, sink, or waste pipe. Ensure the drain hose is free of kinks.
- Electrical Connection: Connect the washing machine to a properly earthed, switched socket. Avoid using extension leads or multi-socket adapters.
Important Safety Information
Always prioritize safety. Pay close attention to warning symbols and instructions regarding electrical connections, water supply, and handling of the appliance. Consult a qualified technician if you have any doubts.
Further Information
For detailed instructions and troubleshooting, refer to the official Miele website or contact Miele customer support.
