Introduction
This manual details the installation and operation of the Harvest Tec Model 454 Automatic Control System. Designed for agricultural applications, this system helps manage and optimize hay baling processes by monitoring moisture levels and controlling preservative application.
The guide covers essential steps including the physical installation of the control unit and sensor, wiring procedures, and system setup. It also provides detailed operating instructions, covering different modes of operation, setting adjustment parameters, and troubleshooting common issues.
For optimal performance and accurate application rates, refer to the included application rate charts tailored for various baler types, including conventional square balers, large round balers, and specific models like John Deere, Hesston, Case-IH, and New Holland.
Key Features and Operations
- Step-by-step installation instructions for mounting brackets and control units.
- Guidance on sensor placement for different baler configurations to ensure accurate moisture readings.
- Detailed operating instructions for both Automatic and Manual modes.
- Procedures for adjusting set points for pump, valves, and alarms.
- Troubleshooting section to address common problems and their solutions.
- Comprehensive application rate charts for various baling rates and desired application levels.
- Wiring diagrams for clear connection reference.
Support and Warranty
For further assistance or inquiries regarding the Model 454 Automatic Control System, Harvest Tec, LLC. can be contacted at:
2821 Harvey Street, Hudson, WI 54016
Phone: 715-386-9100 or 1-800-635-7468
Email: info@harvesttec.com
The product comes with a 12-month warranty from the date of manufacture, covering defects in workmanship. Please refer to the warranty agreement within this manual for full details and conditions.
