Summer Infant Baby Pixel Zoom HD 5.0 Inch High Definition Color Video Monitor

1. Setting Up the Camera & Handheld Screen

Keep this instruction manual for future reference. Please read the following instructions and warnings carefully.

Powering On the Nursery Camera & Parent Handheld

1. Press and hold the camera [Power Button] for 3 seconds. A small green indicator light will appear above the lens.

2. Press and hold the handheld [Power Button] for 3 seconds. The handheld will automatically sync with the camera.

Note: The handheld unit and the camera are synced at the factory for privacy reasons. If they are not synced, refer to the "Adding a Camera" section.

Congratulations! You are now ready to use your Baby Pixel® Zoom HD™ Digital Color Video Monitor!

Charging the Handheld

Charge for 7 hours before first use. After the initial charge, recharge when necessary for 7 hours. Charging overnight is recommended.

Note: While powered off, the handheld does not show a charging indicator. An LED will light up for 5 seconds to confirm charging, then shut off.

[Battery Icon] Charge for 7 hours.

Install the Nursery Camera

Note: For best picture focus, place the camera 6 to 8 ft. (approx. 1.8 to 2.4m) from the crib.

1. Plug in the nursery camera [Plug Icon].

2. Place the camera on a flat surface, such as a dresser or shelf.

3. Alternatively, mount the camera on a wall using the provided screw and wall anchor.

Diagram Description: Shows the nursery camera plugged into a power outlet and placed on a flat surface like a dresser or shelf, or mounted on a wall.

Secure the Camera Cord

STRANGULATION HAZARD: Children have strangled in cords. Keep this cord out of the reach of children (more than 3 ft. (0.9m) away in all directions).

NEVER place the camera or cords within 3-feet of the crib. Secure the cord to your wall using the 6 included [Security Clip]s to keep the cord away from baby's reach.

Diagram Description: Illustrates the cord management process, showing clips to secure the cord to the wall, keeping it more than 3 feet away from the crib.

2. Getting to Know Your Handheld

Screen Icons

• [Clock Icon] Time
• [Lullaby Icon] Lullabies & White Noise
• [VOX Icon] VOX (Voice-Activated Screen Wake-up)
• [Zoom Icon] Zoom (6 levels)
• [Temperature Icon] Temperature
• [Camera Icon] Camera Selection
• [Signal Icon] Reception
• [Battery Icon] Battery Life/Plugged In
• [SleepZone Icon] SleepZone®

Function Buttons

Diagram Description: Shows the handheld unit with labels for the Power/Video button, Moonlite button, Function Buttons (Zoom, Volume, Menu/Select, Up/Down/Left/Right, Talk-Back).

• [Zoom Button]: Zoom (6 levels)
• [Volume Button]: Volume
• [Menu/Select Button]: Menu/Select
• [Up Arrow], [Down Arrow], [Left Arrow], [Right Arrow]: Navigation
• [Talk-Back Button]: Talk-Back
• [Power/Video Button]: Power/Video
• [Moonlite Button]: Moonlite®
• [SleepZone Button]: SleepZone®

Menu Options

Press the [Menu/Select Button] to access menu options. Use the [Left Arrow] / [Right Arrow] buttons to highlight menu items. Press [Menu/Select Button] to confirm. The menu also exits after 8 seconds of inactivity or by tapping the [Power Button] once.

Available Menus: VOX Menu, SleepZone® Menu, Camera Menu, Settings Menu, Lullabies/ White Noise Menu.

3. Adjusting the Handheld Settings

Improve Reception

Flip up the [Antenna] to improve reception.

Handheld Screen Brightness

1. Press [Menu/Select Button]. 2. Press [Right Arrow] to highlight the Settings icon. 3. Press [Menu/Select Button]. 4. Press [Right Arrow] to highlight the brightness icon. 5. Press [Menu/Select Button]. 6. Use [Right Arrow] / [Left Arrow] buttons to adjust brightness. 7. Press [Menu/Select Button] to confirm.

Volume

Press the [Volume Button] to increase/decrease sound level.

Temperature Display

1. Press [Menu/Select Button]. 2. Press [Right Arrow] to highlight Settings icon. 3. Press [Menu/Select Button]. 4. Press [Right Arrow] to highlight the Temperature icon. 5. Press [Menu/Select Button]. 6. Press [Left Arrow] / [Right Arrow] to select °F or °C. 7. Press [Menu/Select Button] to confirm and exit temperature settings.

Clock

1. Press [Menu/Select Button]. 2. Press [Right Arrow] to highlight Settings icon. 3. Press [Menu/Select Button]. 4. Press [Right Arrow] to highlight the Clock icon. 5. Press [Menu/Select Button]. 6. Use [Left Arrow]/[Right Arrow]/[Up Arrow]/[Down Arrow] buttons to adjust time. 7. Press [Menu/Select Button] to confirm.

SleepZone® Virtual Boundary Box

The SleepZone® feature creates a virtual boundary box on your screen. It alerts you with a sound on your handheld if the baby crosses the boundary or an object enters the set area.

1. To activate, press the [SleepZone Button] (defaults to a set area).

2. To adjust the baby boundary area, press and hold the [SleepZone Button] for 3 seconds.

3. Use the [Left Arrow] / [Right Arrow] buttons to adjust the size of the SleepZone®. There are two box size options.

4. Use the [Up Arrow] / [Down Arrow] buttons to adjust the SleepZone® ALARM volume. Press [Menu/Select Button] to confirm.

Note: All buttons except SleepZone®, Power, and Menu/Select become inactive. To shut off SleepZone®, press the SleepZone® or Menu/Select button. SleepZone® can only be used with one camera at a time.

You can also access SleepZone® via the MENU: 1. Press [Menu/Select Button]. 2. Press [Right Arrow] to highlight SleepZone®, then press [Menu/Select Button]. To extend battery life, plug in the handheld while using SleepZone®.

Diagram Description: Illustrates the SleepZone virtual boundary box on the screen, showing how to adjust its size and position.

4. Viewing Your Baby

Remote Camera Steering

Remotely control the camera angle from the handheld. Use the [Up Arrow]/[Down Arrow]/[Left Arrow]/[Right Arrow] buttons to move the camera angle up, down, and side to side.

Digital Zoom

1. Press the [Zoom Button] to zoom in. A zoom icon will appear briefly in the screen's bottom right corner, then at the top of the screen. There are 6 levels of zoom.

2. Adjust the camera view with the [Up Arrow]/[Down Arrow]/[Left Arrow]/[Right Arrow] buttons. Use the [Zoom Button] to zoom closer. Press [Menu/Select Button] to confirm.

5. Hearing & Soothing Your Baby

Video On/Off Power Save Mode

This feature conserves battery life by turning off the screen when the handheld is not plugged in (after 2 minutes, or 30 seconds if VOX or SleepZone® is on).

1. To turn VIDEO OFF and conserve battery power, press the [Power/Video Button]. The screen will go dark. The audio feature remains active.

2. To turn VIDEO ON, press the [Power/Video Button].

If VOX feature is on, video turns on automatically when sound is detected.

Voice-Activated Screen Wake-up (VOX)

The VOX feature turns on your screen when it's in power save mode and the camera detects sound.

1. Press [Menu/Select Button] to enter the menu. 2. Use [Left Arrow] to highlight the VOX icon and press [Menu/Select Button]. 3. Press [Left Arrow] / [Right Arrow] buttons to select VOX ON or VOX OFF. 4. Press [Menu/Select Button] to confirm. The VOX icon will appear at the top of the screen.

Note: When VOX is on, it is temporarily suspended when lullabies/white noise are in use. VOX reactivates when lullabies/white noise turn off.

Sound-Activated Lights

The LED light bar on the side of the handheld lights up as it picks up noises, even in power save mode. (When the battery is low, the first LED flashes red and the handheld beeps.)

Talk-back to Baby

Reassure and soothe your baby with your voice by pressing a button.

1. Press and hold the [Talk-Back Button] to talk to your baby. The talk-back icon will appear briefly in the screen's bottom right corner.

2. Release the button to end talk-back mode.

Lullabies and White Noise

1. Press [Menu/Select Button] to enter the menu. 2. Press [Right Arrow] to highlight the Lullabies and White Noise icon. 3. Press [Menu/Select Button]. 4. Press [Left Arrow] / [Right Arrow] buttons to select a different lullaby or white noise. Press [Menu/Select Button].

A lullaby/white noise will play. The lullaby icon will appear at the top of the screen. The selected sound remains active until a different selection is made.

Lullabies/white noise can be turned on/off by pressing the button on the back of the camera. Note: Lullabies/white noise turn off automatically after 20 minutes. They can also be turned off via the menu: navigate to the lullabies/white noise menu, press [Right Arrow] to select the 'No Sound' icon, then press [Menu Button].

6. Adding and Viewing Cameras

Moonlite® Night Vision Boost

The Moonlite® Night Vision Boost feature provides temporary enhanced viewing in dark rooms.

1. Press and hold the [Moonlite Button] to illuminate a small LED light on the camera. A [Moonlite Icon] will appear in the lower right-hand corner of the screen while the button is pressed.

2. When you release the button, the camera returns to normal black & white night vision. Depending on camera placement, Moonlite® brightness can be adjusted.

Moonlite® automatically turns off after seven seconds. Caution: Do not stare directly at the Moonlite® LED for prolonged periods.

Moonlite® Brightness Adjustment

1. Press [Menu Button]. 2. Press [Right Arrow] to highlight Settings icon. 3. Press [Menu/Select Button]. 4. Press [Right Arrow] to highlight the Moonlite® icon. 5. Press [Menu/Select Button]. 6. Press [Left Arrow] / [Right Arrow] buttons to adjust Moonlite® brightness. 7. Press [Menu/Select Button] to exit.

Camera Options Menu

1. Press [Menu/Select Button]. Camera Options will be highlighted. 2. Press [Menu/Select Button] to confirm. Four icons appear: View Cam, Scan, Add Cam, Delete Cam.

Note: If only one camera is synced, VIEW CAM and SCAN are grayed out.

Adding a Camera

Your monitor supports up to 4 cameras total. Select one to view, or use auto-scan.

1. Plug in the camera. A solid green light above the lens indicates power. If not, press and hold the [Power Button] for 3 seconds.

2. On the handheld, press [Menu/Select Button] twice to open Camera Options.

3. Press [Right Arrow] to highlight Add Camera icon. 4. Press [Menu/Select Button].

5. Press [Left Arrow] / [Right Arrow] buttons to highlight the desired camera. A syncing icon will appear next to the camera number.

Adding a Camera (continued): If sync is successful, video appears with a blue ring around the camera icon. If unsuccessful, a camera icon with an 'X' appears. Repeat sync steps, ensuring camera and handheld are close together.

Deleting a Camera

1. Press [Menu/Select Button] twice for Camera Options. 2. Use [Right Arrow] to highlight Delete Camera icon. 3. Press [Menu/Select Button]. 4. Use [Left Arrow] / [Right Arrow] to highlight the camera to delete. 5. Press [Menu/Select Button] to delete. The camera icon turns gray when disconnected.

Selecting a Camera

1. Press [Menu/Select Button] twice for Camera Options. 2. Use [Right Arrow] to highlight Select Camera icon. 3. Press [Menu/Select Button].

4. Use [Left Arrow] / [Right Arrow] to highlight the desired camera. Synced cameras appear in blue; the current viewing camera is outlined.

5. Press [Menu/Select Button]. Video from the selected camera appears. The camera number icon briefly shows in the screen's lower right corner, and the icon at the top changes.

Note: SleepZone® deactivates when selecting a different camera or using Scan Mode.

Scanning Cameras

Scan Mode cycles through each active camera every 10 seconds. (Only available if more than one camera is synced.)

1. Press [Menu/Select Button] twice for Camera Options. 2. Use [Right Arrow] to highlight Scan Cameras icon. 3. Press [Menu/Select Button].

The scan status bar appears on the right. A red icon indicates lost signal. The camera number icon changes to show the current view. Press any button to stop scanning.

7. Important Information

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. Changes not expressly approved by Summer Infant may void user authority. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used per instructions. If interference occurs, try correcting it by reorienting the receiver, increasing separation, connecting to a different circuit, or consulting a dealer/technician.

CAUTION: To comply with FCC RF exposure requirements, maintain at least 7.9 in. (20 cm) separation between the antenna and all persons. This transmitter must not be co-located or operating with any other antenna or transmitter.

Summer Infant Monitor Warranty Policy

Summer Infant will repair or replace (at their option) the unit free of charge for 12 months from the date of purchase if defective in workmanship or materials. Proof of purchase is required. Without a receipt, warranty is 12 months from the date of manufacture. This warranty does not cover normal wear, misuse, abuse, improper storage/handling, installation, accidents, or unauthorized repair/alteration. Contact Summer Infant Consumer Relations at 401-671-6551 or summerinfant.com/contact for details. Warranty is void if used outside the USA. For sale and use in the USA.

Canadian Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

This equipment complies with IC RSS-102 radiation exposure limits for an uncontrolled environment. Install and operate with a minimum distance of 20cm between the radiator and your body.

Ordering Replacement Parts

To order replacement parts or extra cameras, contact Summer Infant Consumer Relations at 401-671-6551 or visit www.summerinfant.com/contact.

• Camera AC Adapter: #29580-05
• Handheld AC Adapter: #29580-13
• Extra Camera: #36054
• (8) Rechargeable Ni-MH AAA size 1600mAh 4.8V batteries: #36044-10

Contact Us

If you have issues or questions not addressed in this Owner's Guide, contact Summer Infant:

Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895
401-671-6551

Summer Canada, Ltd.
200 First Gulf Blvd., Unit C
Brampton, Ontario, Canada L6W 4T5
905 456-8484

Do not return the product to the store.

©2018 Summer Infant (USA), Inc. Colors and styles may vary. Please retain information for future reference. Made in China. 11/18

Safety Warnings

Adult assembly required. Keep small parts away from children when assembling.

THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.

STRANGULATION HAZARD - Children have STRANGLED in cords. Keep this cord out of reach of children (more than 3 feet (0.9 m) away from the crib). Use enclosed Security Clips to help secure cord away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.

General Safety Instructions:

• When an AC Adapter is plugged in, do not touch the exposed end.
• Test monitor before first use, periodically, and when changing camera location.
• Do not use monitor near water (e.g., bathtub, sink).
• Keep monitor away from heat sources (e.g., stoves, radiators).
• Ensure proper ventilation; do not place on sofas, cushions, beds, etc., that may block ventilation.
• This product is not a toy; do not allow children to play with it.
• This product contains small parts; adult assembly is required. Exercise care when unpacking and assembling.

BATTERY WARNING

• Use only the original rechargeable battery provided. Contact Summer Infant for replacements.
• Do not short-circuit supply terminals.
• Use only recommended battery type or equivalent (volts and size).
• Remove battery when product is stored for long periods or when exhausted.
• Dispose of exhausted batteries properly.
• Keep all batteries away from children.

RISK OF ELECTRIC SHOCK DO NOT OPEN

DO NOT EXPOSE TO RAIN OR MOISTURE

• Read and retain all safety and operating instructions.
• Heed all warnings on the product and in the instructions.
• Follow all operating and use instructions.
• Unplug before cleaning; use a damp cloth. Do not use liquid or aerosol cleaners.
• Do not use attachments not recommended by the manufacturer.
• Do not place on unstable carts, stands, or tables. Use only with manufacturer-recommended accessories.
• Mounting should follow manufacturer's instructions and use recommended accessories.
• Do not block ventilation slots.
• Operate only from the indicated power source type.
• Route power-supply cords to prevent them from being walked on or pinched.
• Avoid placing antenna systems near overhead power lines.
• Do not overload wall outlets or extension cords.
• Never push objects into openings or spill liquid on the product.
• Do not attempt to service yourself; refer servicing to qualified personnel.
• Unplug and refer to qualified personnel if power-cord/plug is damaged, liquid spilled, product exposed to rain/water, product does not operate normally, product is dropped/damaged, or performance changes distinctly.
• When replacement parts are required, use manufacturer-specified parts.
• Upon service completion, ask technician for safety checks.
• Mount to wall or ceiling only as recommended.
• Site away from heat sources.