Product End of Life Instructions
Easy UPS 3S
Easy 3S 10-40 kVA (400V) and 10-20 kVA (208V) IEC 3 phase UPS
Potential Disassembly Risks
Hazard of electric shock, explosion or arc flash
The UPS contains an internal energy source. Hazardous voltage can be present even when disconnected from the utility/mains supply. Before installing or servicing the UPS system, ensure that the units are OFF and that utility/mains and batteries are disconnected. Wait five minutes before opening the UPS to allow the capacitors to discharge.
End of Life Instructions
The following table details components recommended for depollution:
| Recommendation | Number on drawing | Component / Material | Weight (in g) | Comment |
|---|---|---|---|---|
| To be depolluted | 1 | Batteries (Lithium metal coin batteries)* | 2.98 | 1 x coin batteries |
| To be depolluted | 2 | Electrolytic Capacitors* | 1104.65 | 25 x large electrolytic capacitors |
| To be depolluted | 3 | Electronic Board > 10cm² | 5079.74 | 17 X PCBs >10cm² |
| To be depolluted | 4 | Battery (Lead-acid)* | 324000 | 12 X lead-acid battery |
*Not all batteries, capacitors and PCBAs are pictured here. Power batteries for the UPS system are in separate battery cabinet(s) not addressed by this document.
Internal Component Overview
The internal components of the Easy UPS 3S are designed for disassembly. Key components identified by number on internal diagrams include:
- 1: Batteries (Lithium metal coin batteries): Small coin-shaped batteries.
- 2: Electrolytic Capacitors: Cylindrical electronic components.
- 3: Electronic Boards (> 10cm²): Various printed circuit boards (PCBs) including power boards, control boards, and interface boards.
- 4: Battery (Lead-acid): Larger battery modules, typically housed separately but part of the overall UPS system.
Product Description
Manufacturer identification: Schneider Electric Industries SAS
Brand name: Schneider Electric
Product function: The Schneider Electric Easy UPS 3S is an easy-to-install, easy-to-connect, easy-to-use, and easy-to-service 10-40 kVA 3 phase UPS. It is ideal for small and medium businesses, data centers, and other mission-critical applications.
Product reference: E3SUPS20KHB
Additional Information
Total representative product mass: 125475.4 g
Representative product dimensions: 1400 mm x 380 mm x 840 mm
Date of information release: 03/2022
Legal Information
The product family must be disposed of according to the legislation of the country. This document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic information to assure an appropriate end-of-life treatment for the components and materials of the product.
Recyclability Potential
Recyclability potential: 81%
Based on "ECO'DEEE recyclability and recoverability calculation method" (version V1, 20 Sep. 2008 presented to the French Agency for Environment and Energy Management: ADEME).
Contact Information
Schneider Electric Industries SAS
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F-92506 Rueil Malmaison Cedex
RCS Nanterre 954 503 439
Capital social 896 313 776 €
Published by Schneider Electric. © 2019 - Schneider Electric - All rights reserved.
