Memphis Audio VIVREMV2 Wireless Remote Bass Control
Product Overview and Operation Guide
Introduction
The Memphis Audio VIVREMV2 is a wireless remote bass control designed for VIV series amplifiers, including mono and VIV1300.5V2 models, as well as VIVBELLE amplifiers. It comes auto-programmed to pair directly with your amplifier out of the box.
Note: The VIVREMV2 is not compatible with the V2 series of SIXFIVE amplifiers.
Charging and Wiring
The VIVREMV2 requires charging or hardwiring into your vehicle's electrical system before use.
Charging via USB-C
For a 100% wire-free operation, the VIVREMV2 can be charged using the included USB to USB-C (5V-12V) cable. Charging takes approximately 4 hours. The LED indicator will turn OFF when charging is complete. A full charge provides approximately 3000 hours of operation.
Hardwiring
To avoid frequent charging, use the included USB-C to hardwire connection. Connect the hardwire adapter to your vehicle's + (positive) and - (negative) electrical system, then plug the USB-C end into the VIV-REM. If you are uncomfortable with this process, please contact your local Memphis Audio retailer.
Mounting
To mount the VIVREMV2, fasten the included clip onto the desired mounting surface. The VIVREMV2 features a unique design allowing for horizontal or vertical mounting. Ensure you do not drill into any existing electrical or sensitive equipment during installation. Once the clip is mounted, slide the VIVREMV2 into the channel located on its back. The unit can be easily removed for charging by sliding it back off the clip.
Operation
LED Indicator Light
- Volume Adjustment: The LED light will FLASH BLUE when the volume is adjusted [volume up/down].
- Min/Max Volume: The LED will maintain a SOLID BLUE color when the device is set to minimum or maximum volume.
- Protect Mode: A SOLID RED light indicates the amplifier is in protect mode.
Button Functions
- [short press button]: Mutes the audio. Press again to unmute.
- [long press (5 seconds)]: Clears the volume memory and sets the volume to MAX.
EEPROM Functionality
The VIVREMV2 features EEPROM technology to remember the last volume setting used before powering down. When the system is turned back on, the VIVREMV2 will resume playback at the last setting used.
