HONEYWELL BW™ RIGRAT
Transportable Multi-gas Area Monitor
Comply with safety procedures and protect workers with the most user-friendly area monitor of its kind.
The Honeywell BW™ RigRat is an easy-to-use, transportable multi-gas area monitor designed for confidence and safety. It alerts workers to gas threats in their proximity, both indoors and outdoors, across a wide temperature range of -40 to +140°F (-40 to +60°C). The RigRat offers:
- Up to 8 weeks of runtime on a single charge, providing longer operation than comparable area monitors.
- Up to six slots for interchangeable gas sensors, supporting electrochemical, PID, infrared, and catalytic bead sensors for measuring percent LEL and percent by volume.
- Integrated Noise sensor and Metrological data sensors for comprehensive environmental monitoring.
- Enhanced configurations with programmable input and output for flexible integration.
- Approval for explosive atmospheres, certified for ATEX/IECEx Zone 0 and CSA C1D1.
- Added protection by alerting workers to nearby gas leaks, extending beyond the personal detector's coverage of only the breathing zone.
Flexible Applications:
Suitable for zone declassification, turnarounds, confined space entry, routine maintenance, fence line monitoring, and more. Available with an optional pump for remote sampling.
One-Button Operation:
Designed for grab-and-go simplicity, requiring no special expertise.
Simple Setup with a Smartphone:
Utilizes an easy mobile app for configuring alarm set points, accessing calibration records, and managing other settings.
The Honeywell BW™ RigRat features a robust yellow base, a clear display, and an antenna, designed for portability and visibility in industrial environments.
Features and Benefits
Wireless Safety Perimeter
Position multiple Honeywell BW™ RigRat monitors to create a wireless safety perimeter, enhancing situational awareness. [wireless perimeter]
Remote Monitoring
Integrate with Honeywell's remote monitoring software to view real-time gas readings, location data, and other critical information from any internet-connected device, enabling fast, informed decisions. Supports the addition of an optional noise sensor or meteorological sensor. [remote monitoring]
Honeywell TouchPoint™ Plus Compatible
Compatible with the Honeywell Touchpoint™ Plus controller, providing centralized visibility of Honeywell BW™ RigRat monitors and workers' personal detectors. [touchpoint plus compatible]
Other Honeywell BW™ RigRat Features:
- [line power] Line power option for extended runtime in the field.
- [inert mode] Inert mode that prevents false alarms in normal ambient air.
- [I/O ports] I/O ports providing additional input capabilities and local executive activation.
- [easy-read display] Large, easy-to-read display for quick status checks.
- [rugged design] Rugged, weatherproof design, with an optional protective cage for enhanced durability.
Technical Specifications
Instrument Specifications (Typical)
| Specification | Details |
|---|---|
| Model Number | BWRR100P/BWRR100D |
| Size | 15.8 x 11.4 x 18.5 in. / 40.0 x 29.0 x 47.0 cm |
| Weight | 17.6 lb / 8 kg |
| Gas Sensor Slots | Up to 6 |
| Gas Sampling Method | Pumped or diffusion |
| Battery | Rechargeable Li-ion battery (3.7V / 26.4 Ah) |
| Charging Time | Less than 18 hours (instrument powered off) |
| Running Time | 8 weeks (low-power model); varies by configuration |
| Keypads | One-button operation and programming |
| Display | 3.5" 240 x 320 TFT color LCD with white LED backlight |
| Alarm | Red/yellow/green LED alarm; 108 dBA @ 1 m buzzer; on-screen indication |
| Datalogging | Stores gas sensor and instrument data for at least 4 months at one-minute intervals |
| Wireless | ISM license-free band: Bluetooth Low Energy (BT 4.2 / 5.0), 2.4 GHz (default); Optional: Mesh Module (IEEE 802.15.4 868/915 MHz/2.4 GHz); Optional: Wi-Fi Module (802.11 b/g/n 2.4 GHz) |
| Radio Module & Range | Bluetooth LE: up to 16.4 ft. / 5 m; Mesh: up to 984 ft. / 300 m (868-900 MHz) or 492 ft. / 150 m (2.4 GHz); Wi-Fi: up to 164 ft. / 50 m |
| Outdoor Location | Optional GPS receiver module (L1 frequency, 1575.42 MHz); Requires 802.15.4 868/915 MHz modem and Wi-Fi |
| IP Rating | IP65 (pumped models); IP67 (diffusion models) |
| Temperature | -4 to +140°F (-20 to +60°C) (pumped models); -40 to +140°F (-40 to +60°C) (diffusion models) |
| Humidity | 5 - 95% RH (non-condensing) |
| Safety Certifications | cETLus Class I Division 1; Group A, B, C, D; T4; IEC EX/ATEX II 1G Ex ia da IIC T4 Ga; For LEL/IR/CO2 sensor: II 2G Ex ia da db IIC T4 Gb; 1G Ex ia da IIC T4 Ga |
| Wireless Approvals | FCC Part 15, IC, RE-D |
| RoHS (Pending) | RoHS Complaint, Directive (EU) 2015/863 |
| Noise Sensor | 60-125 dBA range; 100 Hz to 8 kHz response; 1 dB resolution; A-weighted 15 sec equivalent level; updated every 5 seconds |
| External Ports | Safe Area Charge Port (AC CHG SAFE AREA): 6 VDC 3 A typical input; Field Charge (IS CHG HAZARDOUS): Intrinsically safe line power supply or SolarPak input; RAEMet Port (Serial): For RAEMet wind sensor (optional); Analog/Switch Input Port (4-20 mA IN): 4-20 mA signal input, X1 channel/switch on/off signal input, X1 channel (optional); ON/OFF Switch Output (SWITCH): Max 20 V / 120 mA, SPDT Normal Open, X3 channels for external ports (optional). Refer to User Guide for complete details. |
Sensor Specifications
| Sensor | Range | Resolution | Temperature Range |
|---|---|---|---|
| COMBUSTIBLE GASES (IR)* | 0-100% LEL / 0-100% vol. | 1% LEL / 0.1% vol. | -40 to +140°F / -40 to +60° C |
| COMBUSTIBLE GASES (LEL) | 0-100% LEL | 1% LEL | -40 to +140°F / -40 to +60° C |
| CARBON DIOXIDE (CO₂) | 0-5% vol. / 100 ppm | 0.01% vol. / 100 ppm | -4 to +131°F / -20 to +50° C |
| CARBON DIOXIDE (CO₂) (EXT. RANGE) | 0-100% vol. | 0.1% vol. | -4 to +131°F / -20 to +50° C |
| VOLATILE ORGANIC COMPOUNDS (VOC) | 0-2000 ppm | 0.1 ppm | -4 to +131°F / -20 to +50° C |
| CARBON MONOXIDE (CO) | 0-500 ppm | 1 ppm | -40 to +140°F / -40 to +60° C |
| CARBON MONOXIDE (CO) (EXT. RANGE) | 0-2000 ppm | 10 ppm | -4 to +131°F / -20 to +50° C |
| CARBON MONOXIDE (CO) (H₂ RESISTANT) | 0-1000 ppm | 5 ppm | -4 to +131°F / -20 to +50° C |
| HYDROGEN SULFIDE (H₂S) | 0-100 ppm | 0.1 ppm | -40 to +140°F / -40 to +60° C |
| HYDROGEN SULFIDE (H₂S) (EXT. RANGE) | 0-1000 ppm | 1 ppm | -4 to +131°F / -20 to +50° C |
| SULFUR DIOXIDE (SO₂) | 0-20 ppm | 0.1 ppm | -40 to +140°F / -20 to +60° C |
| OXYGEN (O₂) | 0-30% vol. | 0.1% vol. | -40 to +140°F / -40 to +60° C |
| NITRIC OXIDE (NO) | 0-250 ppm | 0.5 ppm | -4 to +131°F / -20 to +50° C |
| NITROGEN DIOXIDE (NO₂) | 0-20 ppm | 0.1 ppm | -40 to +140°F / -40 to +60° C |
| HYDROGEN CYANIDE (HCN) | 0-50 ppm | 0.5 ppm | -4 to +131°F / -20 to +50° C |
| AMMONIA (NH₃) | 0-100 ppm | 1 ppm | -4 to +131°F / -20 to +50° C |
| CHLORINE (CL₂) | 0-50 ppm | 0.1 ppm | -4 to +131°F / -20 to +50° C |
*Note: Temperature range for the Dynament Combustible IR sensor is -4 to +131°F (-20 to +50°C).
SolarPak BW™ RigRat (optional)
The Honeywell BW™ RigRat can be powered by the optional SolarPak BW™ RigRat. Certain monitor configurations may not provide continuous operation but offer a runtime extension. Refer to the manual for details.
Certification Markings
- USA and Canada: Class I, Division 1, Groups A, B, C, D T4
- Europe: ATEX II 1 G Ex ia IIC T4 Ga -40°C ≤ Ta ≤ +60°C
- IECEx: Ex ia IIC T4 Ga -40°C ≤ Ta ≤ +60°C
For More Information
Visit safety.honeywell.com
Note: Due to ongoing research and product improvement, specifications are subject to change without notice.
©2020 Honeywell International Inc.
THE FUTURE IS WHAT WE MAKE IT
