INSTALLATION GUIDE

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING

⚠️ RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.

? RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).

TOOLS REQUIRED

• Pliers
• Screwdriver (Phillips head)
• Screwdriver (Flat head)
• Wire Strippers
• Ladder
• Electrical Tape

CARE AND MAINTENANCE

Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.

If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at www.quoizel.com

PACKAGE CONTENTS

• A 12"L Rod (x2)
• B 6"L Rod (x2)
• C Fixture Loop (x1)
• D Curved Plate (x6)
• E Lock Screw (x6)
• F Socket Collar [Preassembled to Fixture Body] (x6)
• G Ring (x1)
• H Fixture Body (x1)

MOUNTING HARDWARE

• AA Crossbar Assembly (x1)
• BB Wire Connector (x3)
• CC Outlet Box Screw (x2)
• DD Ceiling Canopy (x1)
• EE Quick Link (x1)

INSTALLATION

Step 1: Unfold Arms

The fixture body has multiple arms that need to be carefully unfolded to their extended positions. Ensure they are stable.

Step 2: Install Ring

Attach the Ring (G) to the top of the fixture assembly. Ensure the 'This end up' marking is oriented correctly.

Step 3: Install Curved Plates

Attach the Curved Plates (D) to the arms of the fixture body. These plates will support the bulbs.

Step 4: Install Rods

Select the appropriate rods for your ceiling height. For an 8-foot ceiling, use two 12"L Rods. For a 9-foot ceiling, use two 6"L Rods and two 12"L Rods. Screw the rods into the fixture assembly.

Step 5: Install Fixture Loop

Attach the Fixture Loop (C) to the top of the rod assembly. This loop will be used to hang the fixture.

Step 6: Install Crossbar Assembly

Mount the Crossbar Assembly (AA) to the electrical outlet box in the ceiling using the provided Outlet Box Screws (CC). Ensure it is securely fastened.

Step 7: Install Quick Link and Pull Supply Wires

Attach the Quick Link (EE) to the Fixture Loop (C). Pull the supply wires from the outlet box through the Quick Link and the Canopy Lock Ring. Note: The Ceiling Canopy shape may vary depending on the item purchased.

Step 8: Wiring

Connect the wires:

• Connect the white wire from the supply to the ribbed side of the wire from the fixture, identified with the label "N".
• Connect the black (or red) wire from the supply to the smooth side of the wire from the fixture, identified with the label "L".
• Connect the ground wire from the supply to the green ground wire from the fixture, identified with the label "G".

Use the Wire Connectors (BB) to secure these connections.

Step 9: Install Ceiling Canopy

Slide the Ceiling Canopy (DD) up to the ceiling, covering the outlet box and crossbar assembly. Secure it using the Canopy Lock Ring.

Step 10: Install Bulbs

Install six correct bulbs referring to fixture markings and/or labels for maximum wattage. Recommended Bulb Type (not included): 60W, BULB BASE TYPE Candelabra (E12), BULB SHAPE TYPE B.

Your installation is now complete! Restore electricity and save this sheet for future reference.