Installation Guide for MAB5026LG and MAB5026MBK

⚠️ Safety Information

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING: RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.

WARNING: RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.

CAUTION: For your safety, read instructions completely before beginning installation.

If in doubt about electrical installation, consult a licensed electrician.

Turn off electricity to fixture before replacing the bulb(s).

? Tools Required

A collection of common electrical installation tools is depicted, including pliers, wire strippers/cutters, a Phillips head screwdriver, a flathead screwdriver, electrical tape, and a spool of wire.

? Care and Maintenance

Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.

If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at www.quoizel.com.

? Package Contents

• A Fixture Loop x 1
• B Fixture Body x 1
• C Lock Screw [pre-assembled to Fixture Body] x 5
• D Bottom Assembly x 1
• E Optional Candle Cover x 5

? Mounting Hardware

• AA Crossbar Assembly x 1
• BB Wire Connector x 3
• CC Outlet Box Screw x 2
• DD Ceiling Canopy x 1
• EE Quick Link x 2
• FF Fixture Chain x 1

⚙️ Installation

1. Unfold Support Arms

Support arms on the fixture body are shown being extended outwards.

2. Install Bottom Arms

The arms at the bottom of the fixture are shown being attached to the main body.

3. Install Bottom Assembly to Fixture Body

The bottom assembly component is shown being connected to the fixture body.

4. Install Fixture Loop

The fixture loop is depicted being screwed into the top of the fixture body.

5. Install Crossbar Assembly

The crossbar assembly is shown being secured to the electrical outlet box in the ceiling using outlet box screws. The canopy lock ring is placed onto the crossbar.

6. Install Fixture Chain

OPTIONAL: Adjust Chain as desired, using pliers and soft cloth (neither included).

Suggested chain length for ceiling height:

• 8 feet ceiling: use 3 links of chain and 2 quick links
• 9 feet ceiling: use 13 links of chain and 2 quick links
• 10 feet ceiling: use 23 links of chain and 2 quick links

The fixture chain is assembled and attached to the fixture loop using a quick link. Guidance is provided for adjusting chain length based on ceiling height.

7. Pull Supply Wires

The electrical supply wires, including the ground wire, are shown being threaded through the alternate links of the installed fixture chain.

8. Wiring

Connect the wires as follows:

• White wire from supply connects to fixture wire "N" (ribbed side).
• Black (or red) wire from supply connects to fixture wire "L" (smooth side).
• Ground wire from supply connects to fixture ground wire "G" (green ground wire).

Wiring diagram illustrating the connections between supply wires and fixture wires, identified by labels N, L, and G.

9. Install Ceiling Canopy

The ceiling canopy is shown being raised along the wires and chain to cover the mounting hardware and electrical box. The canopy lock ring secures it in place.

Note: Ceiling Canopy shape varies depending on the item purchased.

10. Install Bulbs

Install five correct bulbs referring to fixture markings and/or labels for maximum wattage.

Recommended Bulb Type (not included):

• BULB BASE TYPE: Candelabra (E12)
• BULB SHAPE: TYPE B
• Maximum Wattage: 60W

Note: Remove Candle Covers on the sockets, replace them with Optional Candle Covers if you want.

A light bulb is shown being installed into a socket, with a separate illustration of an optional candle cover.

Your installation is now complete! Restore electricity and save this sheet for future reference.