Introduction
This document is a Quick Start Guide for the Yealink SP96 Bluetooth Speakerphone. It provides essential information for setting up and using the device.
The Yealink SP96 features an integrated LCD screen for status information. Optional configuration, such as disabling specific buttons, can be managed via the Yealink USB Connect application. You can download Yealink USB Connect from: www.yealink.com/product/yuc.
The guide is available in multiple languages, including English, German, French, and Spanish. Key instructions are presented in English for broader accessibility.
Initial setup illustration:
- A Yealink SP96 speakerphone is shown with a [power-off] icon.
- A laptop screen displays the "Yealink USB Connect" application with a download icon.
- A Yealink SP96 speakerphone is shown with a label pointing to the "LCD Screen".
Basic Setup and Connectivity
The Yealink SP96 can be connected to your computer in several ways:
- ? USB Cable: Connect directly to your PC using the provided USB cable.
- ? USB Dongle: Use the optional USB dongle for wireless connectivity. The dongle is optional.
Connectivity diagrams:
- A diagram shows a PC connected to a Yealink SP96 speakerphone via a USB cable and a USB dongle.
- Another diagram shows a PC connected to a Yealink SP96 speakerphone using only the optional USB dongle.
Daisy Chain Mode
The Yealink SP96 supports Daisy Chain mode, allowing you to connect two SP96 units together to expand audio coverage.
Important Note: Daisy Chain mode is exclusively available when connecting the SP96 speakerphones to a PC via USB cable. This mode is not supported when connected wirelessly via Bluetooth ☋.
How to Enable Daisy Chain Mode:
Diagrams for Daisy Chain mode:
- A diagram illustrates two Yealink SP96 speakerphones connected to a PC using USB cables.
- A close-up shows the connection ports and a button labeled with '3S' or '3 s', indicating a press-and-hold action for approximately 3 seconds.
- Connect one SP96 speakerphone to your PC using the provided USB cable.
- On both SP96 devices, press and hold the Daisy Chain button (indicated by a symbol like [hold 3s] or '3S') for approximately 3 seconds.
- The devices will enter Daisy Chain mode.
For optimal performance in Daisy Chain mode, maintain a recommended distance of about 2-3 meters between the two SP96 speakerphones.
Support and Resources
For additional support, documentation, and software downloads, please visit the official Yealink support website:
Document Version: V1.1