ROCK'NTOAST 3IN1

This document is the instruction manual for the Cecotec Rock'nToast 3in1, a versatile kitchen appliance designed for making sandwiches, grilling, and preparing waffles. It provides essential information on parts, operation, safety, cleaning, and maintenance.

The appliance features a sleek stainless steel design with a handle for safe operation and indicator lights for power and readiness.

Parts and Components

Figure 1 illustrates the parts of the appliance:

• 1. Stainless steel cover
• 2. Handle
• 3. Lock
• 4. Upper housing
• 5. Plates release tab
• 6. Lower housing
• 7. Cooking plates (removable)
• 8. Non-stick plates (surface)

Before Use

Ensure all components are present and undamaged. Clean the removable cooking plates with a sponge and soapy water, then dry them thoroughly with a dry cloth or paper towel before assembling them. Note: A slight burning smell or smoke may be noticed when using the sandwich maker for the first time; this is normal and does not affect the safety of your appliance.

Operation

General Warnings

Warning: Do not use this product to defrost frozen food. All food must be completely defrosted before cooking it in this product.

Always use heat-proof mitts or gloves and touch only the handle.

Changing Plates

Allow the device to cool down completely before assembling or disassembling the plates. To remove plates: Open the device, slide the plates release button, and remove the plates. To insert plates: Select the desired plate, clip it into position, and carefully press it down until it clicks into position.

Preheating

Pour a teaspoon of vegetable oil onto the non-stick plates. Use a paper towel to spread the oil on the plates and then wipe off any excess. Close the appliance during the preheating process. The power indicator light will be on, and the ready green light indicator will remain off while the appliance preheats. Prepare your sandwich, grill items, or waffle mixture while it preheats. After approximately 5 minutes, the ready green light indicator will turn on, indicating the appliance is ready for use.

Cooking

Pour or place the ingredients to be cooked directly on the lower non-stick plate. Close the device and use the lock to fasten the handles. Do not open it during the cooking process. Food will be ready in approximately 4-5 minutes. You may cook food for longer according to your preferences. Once food is ready, open the lid and remove it using a plastic or wooden spatula. Warning: Do not use metal knives or objects, as this may cause damage to the non-stick plates.

Notes

During the cooking process, the upper part of the device may slightly bulge.

Avoid using synthetic or low-fat spreads as they tend to overheat at lower temperatures and form dark brown deposits which could stick to the non-stick plates.

Cleaning and Maintenance

Clean the appliance when it is slightly warm. Wipe the cooking plates with a soft cloth to remove food residue. If foodstuff has stuck to the cooking plates, pour a bit of warm water mixed with detergent over the food residue and clean the plates with a non-abrasive scouring pad. Do not use abrasive materials that could scratch or damage the non-stick coating. Wipe the outside of the sandwich maker with a damp cloth only. Do not clean the outside with abrasive products or immerse the appliance in water.

You can use the lock to keep the plates together, allowing you to store the product in an upright position.

Technical Specifications

• Product reference: 03057
• Power: 700-800 W
• Voltage: 220-240 V~
• Frequency: 50/60 Hz
• Ingress Protection: IPX4

Disposal of Old Electrical Appliances

The symbol ♻️ indicates that this appliance must not be disposed of with normal unsorted municipal waste. Old appliances must be collected separately to optimize the recovery and recycling of materials and reduce the impact on human health and the environment. Ensure you dispose of the appliance correctly. If the product has built-in batteries or uses batteries, they should be removed and disposed of appropriately. Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Technical Support Service and Warranty

The warranty is valid for 2 years from the date of purchase, provided that the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual. The warranty covers manufacturing defects and faults in materials, but does not cover damage resulting from improper use, accidents, normal wear and tear of parts, or faults attributable to the customer. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728.

Contact Information

Grupo Cecotec Innovaciones S. L.

C/ de la Pinadeta s/n, 46930 Quart de Poblet, Valencia, Spain

Website: www.cecotec.es