GPS Tracker ST-902

Quick Start

Thank you for purchasing our GPS tracker. This Quick User shows how to operate the device smoothly and correctly.

WEBSITE Tracking (PC Version):

Platform: www.sinotrackpro.com

User name: ID number on the tracker

Password: 123456

Image Description: A screenshot of the SinoTrack login page showing fields for User, Password, and Language, with a background image of various vehicles.

APPLICATION Tracking (Mobile APP):

You can search SinoTrack PRO on APP Store (iOS) or Google Play (Android).

Or Download from the QR Code:

Image Description: Two QR codes are displayed, one for downloading the SinoTrack PRO app and another with the SinoTrack logo. Below the QR codes, a graphic shows the SinoTrack PRO app interface with options for tracking and tools.

Server: SinoTrackPRO

User Name: ID number on tracker

Password: 123456

If you have more SinoTrack GPS trackers, and want to manage them in one account, please contact SinoTrack. They will create an account for you, so you can monitor multiple devices on the platform at the same time.

SIM Card and Initial Setup

1. Choose SIM card: It should be a Normal SIM card, without a PIN code.

Image Description: Icons representing Normal SIM, Micro SIM, and Nano SIM cards, with a red cross over Micro SIM and Nano SIM, indicating Normal SIM is the correct choice.

2. Insert SIM card: Properly insert the GSM card, the tracker will start. Connect external power supply.

3. Power on: Put the device outside for about 30 seconds. LED lights will keep lighting on, indicating the device can work normally.

4. Dialing: Dial the device number. It will hang up and reply with a tracking message containing valid longitude and latitude.

5. Set APN: Please send an SMS to the tracker to set the APN (Access Point Name). The default command is:

SMS: 8030000 APN

If your SIM Card provider requires a user name and password for the APN, please send the command:

SMS: 8030000 APN APNuser APNpassword

6. Set server: Send SMS to set the trackers to our server:

SMS: 8040000 45.112.204.245 8090

7. Online Tracking: If all settings are correct, you can track the device online.

If the device is not online, please check the device settings. Send: RCONF to the device, and it will reply with the current settings.

Verify the following:

• The APN is correct.
• The IP and Port are correct.
• The ID on the platform is correct.
• The device is in the correct working mode (SMS or GPRS).

For login account issues or suggestions, please leave a message under your order or send an email to: sino@sinotrack.com.

How to Install

This is a plug-and-play device. Connect it to the OBD connector.

Image Description: Three images showing the installation process: the tracker device, connecting the tracker to a car's OBD port, and the OBD port located within a car's interior.

How to find the OBD connector on your car:

The OBD connector can be found in approximately 6 locations in a car, but most commonly in one specific place.

Image Description: A diagram of a car's interior highlighting 6 potential locations for the OBD connector, numbered 1 through 6.

LED Status

1.1. Blue LED --- GPS Status

1.2. Orange LED --- GSM Status

The default password is: 0000

The default mode is normal working (sleep off).

GPS Status: 'A' means the device has a location; 'V' means the location is invalid.

Alarm mode is on.

Alarms will be sent to the 3 control numbers.

Functions

1. Set control number:

Command: Number+pass+blank+serial

Sample: 139504434650000 1

Explanation: 13950443465 is the mobile number, 0000 is the password, and 1 indicates the first control number.

When the tracker replies "SET OK", the setting is successful. You can set the second and third control numbers similarly.

2. Working mode:

The ST-902 supports both SMS and GPRS working modes.

• SMS Mode (Default): Use SMS only for control and to get Google location from your mobile.
• GPRS Mode: For real-time online monitoring and long-term data storage.

To choose a mode, send an SMS command:

• SMS Mode: Command: 700+Password. Sample: 7000000. Reply: SET OK.
• GPRS Mode: Command: 710+Password. Sample: 7100000. Reply: SET OK.

3. Change Password

Command: 777+New Password+Old password

Sample: 77712340000

Explanation: 1234 is the new password, and 0000 is the old password. The tracker will reply SET OK upon successful change.

4. Get location with Google link

Command: 669+password

Sample: 6690000

The tracker will read the GPS data and send back a Google Maps link to check the location.

Example Reply: http://maps.google.com/maps?q=+22.64208.+114,18828 Date: 2016-5-18 Time:13:40 ID: 8160528336 Fix:A Speed:0KM/H Bat:5

5. Get location by phone call:

Call the SIM card number in the tracker. It will reply with the location via a Google Maps link.

Example Reply: http://maps.google.com/maps?q=+22.64207.+114.18829 Date: 2016-5-18 Time:13:36 ID: 8160528336 STATE:Phone ACC OFF Fix:A Speed:0KM/H Bat:5

If the tracker is in an invalid location, it will reply with the last valid location. Once a new location is acquired, it will send a second SMS with the new location.

6. Change Time Zone

Command: 896+password+E/W+HH

Sample: 8960000E00 (default)

Explanation: E means East, W means West, HH is the time zone offset. 0 time zone is 8960000E00.

Reply: SET OK

7. Send location in defined time every day:

The location will be sent to the first control number.

Command: 665+password+HHMM

Explanation: HH is the hour (00-23), MM is the minutes (00-59).

Sample: 66500001219

Reply: SET OK

To close this function, use the command: 665+password+OFF (default)

Sample: 6650000OFF

Reply: SET OK

Example Reply: http://maps.google.com/maps?q=+22.64207.+114.18829 Date: 2016-5-18 Time:13:36 ID: 8160528336 STATE: DAILY REPORT Fix:A Speed:0KM/H Bat:5

8. Geo Fence:

Sends an alarm to the first number only.

• Open Geo Fence: Command: 211+password. Sample: 2110000. Reply: SET OK.
• Close Geo Fence: Command: 210+password. Sample: 2100000. Reply: SET OK.
• Set the Geo Fence: Sample: 0050000 1000 (sets Geo Fence to 1000 meters). Reply: SET OK.

SinoTrack suggests setting the Geo Fence to more than 1000 meters.

Example Reply: http://maps.google.com/maps?q=+22.64207,+114.18829 Date: 2016-5-18 Time:13:36 ID: 8160528336 STATE: OVER FENCE ALARM Fix:A Speed:0KM/H Bat:5

9. Over speed Alarm:

Sends an alarm to control numbers.

Command: 122+password+Blank+XXX

Sample: 1220000 120

Explanation: XXX is the speed limit in KM/H (0-999). If XXX is 0, the over speed alarm is closed.

Reply: SET OK

Example Reply: http://maps.google.com/maps?q=+22.64207.+114.18829 Date: 2016-5-18 Time:13:36 ID: 8160528336 STATE: OVER SPEED ALARM Fix:A Speed:0KM/H Bat:5

10. Mileage:

• Set the initial Mileage: Command: 142+Password<+M+X>. Sample: 1420000M1000. Reply: MILEAGE RESET OK, SET OK, CURRENT: 1000.
• Read the current Mileage: Command: 143+password. Sample: 1430000. Reply: CURRENT TOTAL MILEAGE:XX. (XX is the mileage in meters).

11. Shock Alarm:

Sends an SMS alarm to the first number.

• Open Shock Alarm: Command: 181+password+T. Sample: 1810000T10. Reply: SET OK. (T is shocking time in seconds, 0-120 seconds).
• Close Shock Alarm: Command: 180+password. Sample: 1800000. Reply: SET OK.

Example Reply: http://maps.google.com/maps?q=+22.64207,+114,18829 Date: 2016-5-18 Time:13:36 ID: 8160528336 STATE: SHOCK ALARM Fix:A Speed:0KM/H Bat:5

12. Low battery alarm:

When the battery is low, the tracker sends a Low Power Alarm SMS to the first number.

Example Reply: http://maps.google.com/maps?q=+22.64207.+114.18829 Date: 2016-5-18 Time:13:36 ID: 8160528336 STATE: LOW POWER ALARM Fix:A Speed:OKM/H Bat:5

Battery status: Bat:5 (100%), Bat:4 (80%), Bat:3 (60%), Bat:2 (40%), Bat:1 (20%). When Bat is 1, a low battery alarm is sent.

13. Call mode:

• Call mode on: Command: 150+password. Sample: 1500000. Reply: SET OK.
• Call mode off: Command: 151+password. Sample: 1510000. Reply: SET OK.

When call mode is on, alarms will trigger both a call and an SMS to the control number. When call mode is off, only SMS is sent.

14. Sleep mode:

• Open Sleep mode: Command: SLEEP0000 1. Reply: SET OK.
• Close Sleep mode: Command: SLEEP0000 0. Reply: SET OK.

15. Set APN:

Command 1: 803+password+Blank+APN. Sample: 8030000 CMNET. Reply: SET OK.

If your APN requires a user and password:

Command: 803+password+Blank+APN+Blank+APNuser+Blank+APNpass. Sample: 8030000 CMNET CMNET CMNET. Reply: SET OK.

16. Set the IP and Port:

Command: 804+password+Blank+IP+Blank+Port. Sample: 8040000 45.112.204.245 8090. Reply: SET OK.

17. Set the time interval:

(Default is 20 seconds)

Command: 805+password+Blank+T. Sample: 8050000 20. Reply: SET OK.

Explanation: T is the time interval in seconds (0 to 18000). The minimum time interval is 10 seconds. When T=0, GPRS is closed.

Online Track:

Please login from www.sinotrackpro.com or 45.112.204.245.

Image Description: Screenshots of the SinoTrack web platform showing map views and data lists for tracking vehicles.

You can also download our APPS on the website to track on your mobile:

Image Description: Three mobile phone screens displaying the process of downloading and using the SinoTrack mobile application, including QR codes and app interfaces.

Other Functions:

1. RESTART

The tracker will restart.

2. RCONF

Read the configuration of the tracker.

Tracker will reply:

ST-902,ID: 8160528336,UP:0000,U1:,U2:,U3:,MODE:GPRS,DAILY:OFF,GEO FENCE: OFF,OVER SPEED:OFF,VOICE:ON,SHAKE ALARM:OFF,SLEEP:OFF,APN:CMNET,,,IP:45.112.204.245:8090,GPRSUPLOAD TIME:20,TIME ZONE:E00

Details:

• ST-902: software version
• ID: 8160528336 (Tracker ID)
• UP: 0000 (password, default is 0000)
• U1: the first control number
• U2: the second control number
• U3: the third control number
• MODE:GPRS (working mode, default is GPRS)
• DAILY:OFF (Daily time to report, default off)
• GEO FENCE: OFF (Geo Fence, default off)
• OVER SPEED:OFF (over speed, default off)
• VOICE:ON (Call mode, default on)
• SHAKE ALARM:OFF (Shock Alarm, default off)
• SLEEP MODE : OFF (sleep mode, default off)
• APN:CMNET,,, (APN, default is CMNET)
• IP:45.112.204.245:8090 (The IP and Port)
• GPRS UPLOAD TIME:20 (time interval)
• TIME ZONE:E00 (Time zone, default is +0)