BLUETOOTH SPEAKER SUNGLASSES
Item No. 208072
Introduction
Thank you for purchasing the Bluetooth Speaker Sunglasses. Please take a few minutes to read this guide and store it for future reference.
Features
- Bluetooth sunglasses for music, hands-free phone calls and more
- Bluetooth Version 5.0
- Compatible with all iPhones, iPads and Android smartphones and tablets
- Dual speakers
- Built-in microphone for hands-free phone calls
- Plays up to 5 hours on a full charge (maximum volume)
- IPX4 splash resistant
- Charges via USB
Description of Parts
The Bluetooth Speaker Sunglasses feature the following components:
- Status Light: Indicates charging or power status.
- Charging Port: Located on both arms for magnetic charging.
- Microphones: Integrated near the temples for hands-free calls.
- Function Button: Located on both arms. These buttons perform the same tasks and can be used interchangeably for power, music control, and calls.
- Speaker: Integrated into the arms of the sunglasses.
Note: The left and right function buttons perform the same tasks and can be used interchangeably.
Charging the Battery
- Ensure the glasses are charged prior to first use.
- Charge the glasses magnetically using the included USB power cord.
- The glasses will automatically power off during charging.
- The charge time is approximately 90 minutes.
- A full charge lasts about 5 hours at maximum volume, or approximately 8 hours at 60% volume.
Note: When the battery is low, a "low battery" voice prompt will be heard every 60 seconds. Please recharge the battery.
Operation
Powering On/Off
- To turn the glasses ON: Press and hold either the left or right function button for 2 seconds.
- To turn the glasses OFF: Press and hold either the left or right function button for 5 seconds.
Note: If the glasses are left on for 5 minutes without an audio signal, they will automatically power off to conserve battery power.
Pairing
- Open the Bluetooth settings on your phone.
- Search for the device named "AJ01".
- Pair your phone with AJ01.
Both speakers will pair automatically after the glasses are powered on.
Playing/Pausing Music
- To PLAY music: Click the left or right function button ONCE.
- To PAUSE music: Click the left or right function button ONCE.
- To play the NEXT song: DOUBLE CLICK the left or right function button.
- To play the PREVIOUS song: TRIPLE CLICK the left or right function button.
Note: There is no volume control on the Bluetooth Speaker Sunglasses. Please adjust the volume using the volume control on your phone or tablet.
Answering the Phone
- To answer an incoming call: Click the left or right function button.
- To hang up a call: Click the left or right function button.
- To reject a call: Long press (2 seconds) the left or right function button.
Voice Assistant
- To activate voice assistant: Long press the left or right function button until you hear a beep, then release the button.
- To exit voice assistant: Click the left or right function button.
Note: The Voice Assistant feature may not be compatible with all phones. Consult your phone's owner's manual for more information.
Low Latency Mode
Low Latency Mode can be activated to deliver sound in sync with your TV or computer screen (e.g., for movies or video games).
- To turn on Low Latency Mode: Click the left or right function button during standby mode.
Restoring Original Settings
In the event of a malfunction, you may wish to restore the original factory settings.
- To reset the device and clear all previous pairing records: Long press (8 seconds) the left or right function button.
Cleaning the Lenses
- Do not clean the lenses while they are dry. Moisten the lenses first and then wipe them dry with an eyeglass cloth.
- Clean the lenses in one direction. Do not clean them with a back-and-forth or circular motion.
Specifications
| Frame color | Matte black |
| Weight | 44.8 g |
| Water rating | IPX4 (splash resistant) |
| Bluetooth version | 5.0 |
| Battery | 90mAh |
| Charging voltage | 5V / 160mA |
| Charge time | 90 minutes |
| Continuous play time | About 5 hours at maximum volume (about 8 hours at 60% volume) |
Safety Warnings
- Use only the charging cable that came with this device.
- After charging, please disconnect the charger.
- Do not charge the product for more than 12 hours continuously.
- Do not dismantle or open this device. There are no user-serviceable parts.
- Do not submerge this device in water.
- Do not use this device near flammable liquids, chemicals or gasses.
- Do not use this device near medical implants or devices such as pacemakers, hearing aids or cochlear implants.
- Do not use this device while driving.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. FCC ID: 2AZY7-AJ01
