Connecting to the Speaker
Connecting with the EDGE App
To connect your speaker using Wi-Fi:
- Search for the EDGE by Sharper Image app on the Google Play Store (Android) or App Store (iOS). Download and install it.
- Power the speaker ON by long pressing the [Power/Alexa Button].
- Open the EDGE app and follow the on-screen instructions to connect to the speaker.
NOTE: Ensure your device is connected to a 2.4G Wi-Fi network, not a 5G network, when connecting the speaker via the EDGE app.
When the speaker is in Wi-Fi mode, the color ring will turn solid LIGHT BLUE.
Pairing with Bluetooth
- Press the [Mode Button] to switch to Bluetooth mode. A voice prompt will be heard, and the speaker lights will flash.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "SWF1002" from the list of found devices to pair.
- After successful pairing, a tone will indicate the connection.
When the speaker is in Bluetooth mode, the color ring will turn solid BLUE.
If a previously paired device is in range when the speaker is turned on, it will connect automatically.
Connecting with the Auxiliary Cable
- Attach one end of the supplied 3.5mm auxiliary cable to the [Auxiliary Jack] on the back of the speaker.
- The speaker will automatically switch to auxiliary input mode.
- Attach the other end of the cable to the headphone jack of your audio device.
When the speaker is in auxiliary mode, the color ring will turn solid GREEN.
Using the Speaker
Powering ON/OFF
Long press the [Power/Alexa Button] to power the speaker ON or OFF.
Changing Input Modes
Quickly press the [Mode Button] to cycle through Wi-Fi, Bluetooth, and Auxiliary input modes.
Adjusting Volume
Long press the [Volume Up Button] or [Volume Down Button] to adjust the volume. Alternatively, use the volume controls on your paired device or within the mobile app.
Location of Controls
The controls are located on the top of the speaker:
- 1. [Mute Button]: Mute/unmute Alexa voice activation.
- 2. [Volume Down Button]: Decrease volume.
- 3. [Power/Alexa Button]: (Long Press) Power speaker ON/OFF.
- 4. [Power/Alexa Button]: Activate Alexa.
- 5. [Volume Up Button]: Increase volume.
- 6. [Mode Button]: Change input mode.
- 7. [Color Ring]: Provides visual feedback on speaker status.
Ports are located on the bottom of the speaker:
- 8. [Auxiliary Jack]: For connecting external audio devices via a 3.5mm cable.
- 9. [Micro-USB Port]: For charging the speaker.
- 10. [Charging LED]: Indicates charging status.
Using Alexa (Alexa ONLY)
Once set up, Alexa can be activated by voice command or by pressing the [Power/Alexa Button] for immediate access.
- To mute or unmute voice access, press the [Mute Button].
- Press the [Power/Alexa Button] to immediately access Alexa without speaking.
Using the Speaker with Alexa
The SWF1002 offers extensive integration with Amazon Alexa. To use Alexa, you must log in (or create an account) at Alexa.Amazon.com and then log in via the EDGE by Sharper Image app.
Once logged in, you can use Alexa functions with the speaker. Consult Amazon's Alexa website for tutorials and settings adjustments.
To interact with Alexa, speak aloud, starting your sentences with "Alexa." For example: "Alexa, what is the weather?" or "Alexa, play some music."
NOTE: For optimal Alexa voice recognition, it is recommended to keep the volume around 75% within the EDGE app.
The color ring provides visual cues for Alexa's actions:
- Solid Light Blue: Alexa is idle.
- Solid Blue: Alexa is listening.
- Flashing Blue: Alexa is thinking.
- Flashing Light Blue and Blue: Alexa is speaking.
- Flashing Red: Alexa has encountered an error.
- Solid Red: Microphone is off.
For detailed tutorials on using Alexa or adjusting settings, please visit Amazon's Alexa website (Alexa.Amazon.com).
Charging the Speaker
To charge the speaker:
- Attach the small end of the supplied micro-USB cable to the [Micro-USB Port] on the side of the speaker.
- Attach the large end of the cable to a USB port on a computer, a USB charging device, or a 5V USB adapter.
The [Charging LED] will turn RED while charging and turn OFF when the speaker is fully charged.
IMPORTANT: Charge your speaker for at least 3-5 hours before using it for the first time.
Playing Music
Music can be played through the speaker via the EDGE by Sharper Image mobile app, by pairing your device via Bluetooth, or by connecting a 3.5mm auxiliary cable. Refer to the "Connecting to the Speaker" section for details.
Legal Information
READ CAREFULLY AND KEEP THIS MANUAL
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
WARNING Li-ion Battery Inside
This product is fitted with a Li-ion battery. Do not damage, open, or dismantle the battery. Do not use it in damp and/or corrosive conditions. Use only with compatible chargers. Never dispose of batteries in a fire, and never expose them to high temperatures. Do not expose the product to temperatures exceeding 60°C (140°F).
RECYCLE: The crossed-out garbage bin symbol [♻️] means that you must not dispose of this product together with unsorted household waste.
Rain/Moisture Warning
Do not expose the unit to extreme temperatures (heat or cold), open flames, humid conditions, or wet conditions. Do not submerge in water. Do not open this product or attempt to repair the unit yourself should it not be working.
Limited Warranty
90 Days Limited Warranty
In the unlikely event that this product is defective or does not perform properly, you may, within ninety (90) days from your original date of purchase, return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
- Call the Customer Support number located below, or visit the website portal to receive an SRO number.
- Provide proof of the date of purchase (dated bill of sale) within the package.
- Prepay all shipping costs to the authorized service center and insure your return.
- Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
- Describe the defect or reason for returning the product.
Your product will be repaired or replaced, at the company's option, with the same or a similar model of equal value if examination by the service center determines the product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.
The shipping address of the authorized service center is:
Customer Service Dept. 36
c/o Southern Telecom
400 Kennedy Drive
Sayreville NJ 08872
Warranty Service Not Provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, and unauthorized modification. This warranty is voided if any unauthorized person opens, alters, or repairs this product.
All products being returned to the authorized service center for repair must be suitably packaged.
Limitation of Warranty
- THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
- REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Questions and Customer Support
For further assistance or troubleshooting, please contact the customer support line:
Phone: 1-877-768-8481
Monday - Friday, 8AM - 10PM (EST)
Or visit the website:
Website: www.SouthernTelecom.com
Click on "Product Support".
