SAVE THESE INSTRUCTIONS
Find the latch and the polarity line. Align parts as shown below and insert the adapter box into the track.
[Illustration: Adapter box with 'Polarity line' and 'Latch on adapter' indicated by red arrows, being inserted into a track.]
Continue to rotate until the latch snaps in place between the two track rails.
[Illustration: Adapter box rotating within the track, with red arrows showing rotation direction labeled 'Rotate in the direction of the "Install" arrow'.]
Latch snaps into place between rails.
[Illustration: Adapter box fully seated in the track, with 'Final Position' labeled where the latch is secured between track rails.]
Second Circuit Positioning
- Hold onto Adapter Box with one hand.
- Place the end of a flat head screwdriver under the contact shown below.
- Gently pull up, the contact should move vertically until hitting a hard stop.
- Follow instructions for inserting into track.
Find contact above the ground contact. This is the only contact that is adjustable.
[Illustration: Close-up of adapter contacts, with 'Ground contact' labeled and red arrows pointing to it and an adjustable contact above it.]
Final Position
[Illustration: Close-up of the adjustable contact in its final, upward position.]
Acuity Brands Lighting
