Potensic T25 GPS Quad-copter
Quick Start Guide
Step 1: Turn on drone, place on a level surface
Turn on the drone and place it on a level surface. The drone will automatically trim itself to the level surface. All indicator lights will blink red.
Visual: Image of the Potensic T25 drone positioned on a flat surface.Step 2: Turn on remote
Turn on the remote control. Push the left joystick up, then push it down. Pairing is successful. The drone's rear lights will flash blue and the front lights will flash white.
NOTE: You can connect to WiFi via the Potensic-G app or wait until the GPS is calibrated.
Visual: Image of the Potensic remote control, showing the left joystick being moved up and then down.Step 3: Connect APP
On your mobile device, turn on WiFi and select the network named "Potensic-xxx". Then, open the Potensic app. The drone's rear lights will flash blue and the front lights will flash white.
Visual: Image showing a mobile phone screen with WiFi settings and the Potensic app interface.Step 4: Initiate GPS Compass Calibration
Push the joysticks to the 1 o'clock (right joystick) and 11 o'clock (left joystick) positions simultaneously. The drone's rear lights will flash alternately blue/red, and the front lights will flash alternately white/red. The app will display "Compass Calibration".
Visual: Image of the Potensic remote control with both joysticks pushed to the 1 o'clock and 11 o'clock positions.Step 5: GPS Compass Calibration Part 1
Keep the drone level. Hold the drone by its tail and lift it. Rotate your body in one full circle (360°). The drone's rear lights will turn solid blue.
Visual: Diagram illustrating a person holding the drone horizontally by the tail and rotating their body 360 degrees. An arrow indicates the direction of rotation. The drone's rear lights are shown as solid blue.Step 6: GPS Compass Calibration Part 2
Hold the drone by its bottom, lift the drone so it faces downwards, and rotate your body in one full circle (360°). The drone's front lights will turn solid white. The app will display "Compass Calibration okay".
Visual: Diagram illustrating a person holding the drone by its bottom, with the drone facing downwards, and rotating their body 360 degrees. An arrow indicates the direction of rotation. The drone's front lights are shown as solid white.Step 7: Resume to Default Setting / Calibrate Gyroscope
Push the joysticks to the 11 o'clock (left joystick) and 1 o'clock (right joystick) positions simultaneously. The drone's rear lights will flash blue and the front lights will flash white. The app will display "Gyroscope is being calibrated" or "Gyroscope okay".
Visual: Image of the Potensic remote control with both joysticks pushed to the 11 o'clock and 1 o'clock positions.Step 8: Finalize GPS Calibration
Place the drone back on a level surface. The drone's rear lights will flash blue and the front lights will flash white, indicating that the GPS calibration is being finalized. This process may take a few minutes. The app will display "Waiting for GPS signal". Once all the lights turn solid (rear blue, front white), the drone is ready to fly. The app will display "Ready to fly".
Visual: Image of the Potensic T25 drone on a flat surface, with indicators showing solid rear blue and front white lights.Notice
In environments with weak GPS signals (e.g., indoors), the drone's lights will flash blue (rear) and white (front). To disable GPS mode, press and hold the right joystick on the remote for 2 seconds. This will allow you to fly the drone, but all GPS-dependent functions, including Position Hold, Follow Me, and One Key Return, will be deactivated.
