Potensic T25 Drone User Manual

Introduction

Thank you for purchasing the Potensic T25 GPS quadcopter drone. Please read these instructions and warnings carefully before use. Keep this manual in a safe place for future reference regarding proper use and maintenance.

Important Information

1. This product is a high-precision device integrating advanced electronics and high-frequency transmission. It is not a toy. Read the manual thoroughly for correct assembly and to avoid malfunctions or accidents. Operate and control this product safely. Improper use can cause injury and property damage. Failure to follow instructions may result in losing the device.
2. This product is recommended for experienced drone pilots aged 14 and above.
3. For any issues during use, operation, or maintenance, please contact technical support or your responsible dealer.

Safety Precautions

This radio-controlled model can be dangerous. Ensure it is kept away from people when flying. Incorrect use, improper assembly, adverse weather conditions, or lack of familiarity with the drone could lead to serious damage or accidents.

1. Keep away from structures and crowds: This drone can be affected by weather, impacting speed and control. Keep it away from crowds, buildings, trees, structures, and high-voltage cables. Avoid flying in adverse weather like rain, thunderstorms, and strong winds to ensure the safety of users, spectators, and property.
2. Keep away from humid environments: The drone contains sensitive electronic and mechanical components. Avoid flying in humid conditions, as moisture ingress can cause malfunctions and accidents.
3. Use only intended components: Use original Potensic-Series parts for assembly, maintenance, and safe flight. Operate only within the product's permitted range. Using unapproved parts will void the warranty. Do not use this device for any illegal purposes.
4. Avoid independent control for new users: New users may find it difficult to operate the drone initially. Avoid flying alone; seek assistance from an experienced user if possible.
5. Do not operate under the influence: Operate the drone according to your physical and mental state. Fatigue, poor mental condition, or incorrect operation can increase the risk of accidents. Avoid drugs and alcohol.
6. Maintain a safe distance at high speed: When flying at maximum speed, keep a safe distance from the pilot and surrounding objects to prevent danger or damage.
7. Store in a cool, dry place: The drone is made of metal, fiber, plastic, and electronic components. Keep it away from heat sources and prolonged direct sunlight, which can cause distortion and damage.

NOTE: This equipment has been tested and complies with Class B digital device limits per FCC Part 15. These limits provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee of non-interference is made. If interference occurs, try reorienting/relocating the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician. Unauthorized changes or modifications will void the warranty.

Warnings

1. Important information is included in this package. Read the manual and keep it for future reference.
2. You are solely responsible for ensuring the aircraft does not cause injury to others or damage to property.
3. Use the drone only as shown in the instruction manual. Assemble as directed. During flight or landing, maintain a distance of 1-2 meters from the aircraft to avoid collisions with the head, face, or body, which could cause injury.
4. Potensic and its distributors are not responsible for improper use or pilot-induced damage.
5. Children aged 14 and above must use this product under adult supervision. This product is FORBIDDEN for use by children under 14 years old.
6. Assemble and use the product correctly as shown in the manual and packaging instructions. Some parts require adult assembly.
7. Small parts are included. Keep out of reach of children to prevent choking hazards ⚠️.
8. Flying near airports or roads is prohibited. Consult local legislation. Recording in urban areas may also be prohibited.
9. Dispose of packaging material safely to prevent harm to children.
10. Do not disassemble or reassemble the drone yourself, as this may cause flight malfunctions.
11. Batteries must be charged correctly in the designated charger compartment, inserted with the correct logo orientation.
12. The transmitter includes a built-in 3.7V rechargeable Li-Po battery.
13. Only use the original charger manufactured by Potensic.
14. The charger is not a toy.
15. Charge batteries under adult supervision. Keep away from combustible materials while charging. Keep the drone in sight during charging.
16. Do not short-circuit or apply pressure to the battery, as this could cause an explosion.
17. Do not interchange the Li-ion battery with other types.
18. The drone's smart lithium battery can be charged internally or externally.
19. Do not short-circuit, disassemble, or throw the battery into fire. Do not place batteries near hot areas like domestic heating appliances.
20. Keep aircraft away from any electrical sources or magnetic objects that could cause interference.
21. Maintain a safe distance from high-speed rotating rotors to prevent accidental damage.
22. The motor will get hot. Do not touch to avoid burns or injury.
23. Do not bring the drone close to your ear, as it may damage your hearing.
24. A 5V mini USB wall charger adapter is recommended. Do not use any charger with a voltage exceeding 5V.
25. Do not use the drone near restricted areas or radio-frequency zones like airports, as per local legislation.
26. Keep your UAS (Unmanned Aircraft System) in sight.
27. Never fly over groups of people.
28. Never fly over stadiums or sporting events.
29. Understand airspace restrictions and requirements.

ADVERTENCIA: This item should not be used by minors under 14 years old. Those over 14 should use it under adult supervision.

ADVERTENCIA: Drone battery charging must always be supervised by an adult. Disconnect the battery when fully charged. Do not overcharge the battery, as it is detrimental.

General Warnings:

• Clean your drone frequently with a soft cloth.
• Avoid prolonged exposure to heat sources like the sun.
• Do not immerse the drone in water; it will damage electronic components.
• Regularly check the charger and other accessories. If any damage is found, discontinue use immediately until repaired.

Parts of the Drone

Visual description of drone parts:

• 1. HD Camera
• 2. Landing Gear / "Feet"
• 3. Propellers
• 4. Motor
• 5. LED Indicators

Visual description of the drone's Li-Po battery:

• Battery status indicator
• USB charging port
• Battery switch: Press lightly to turn on, press and hold for 2 seconds to turn off.

Propeller Assembly

Each propeller is marked with a letter "A" or "B". Ensure you attach the correct propeller to the corresponding motor.

1. Unscrew the propeller cap.
2. Remove the propeller cap.
3. Remove the pad and the propeller blade.
4. Place the correct propeller and pad.
5. Place the propeller cap.
6. Tighten the screw.

Diagram description: Shows propeller cap, spacer ring, propeller, and gear, with A/B markings indicating correct placement.

Camera Mounting

Follow these steps to mount the camera:

1. Connect the camera cables to the corresponding ports on the underside of the drone. The smaller cable connects to the small port, and the larger cable to the large port. The cable connector has two sides (A/B). Ensure the small interface side faces the drone's front, and the larger interface side faces the drone's tail.
2. Slide the camera into the camera installation track on the drone's underside.
3. To remove the camera, press the camera lock on the drone's underside and push the camera outwards to disconnect the camera cable from the port.

Diagram description: Illustrates connecting camera cables and sliding the camera into place.

TF Card Installation

Insert the optional memory card (not included) into the TF card slot of the camera module located on the drone's underside. Connect the drone's power and sync the drone with the remote control. The red light on the camera module will flash continuously, indicating the camera is ready to take photos and videos (memory card sold separately).

Remote Control

Diagram description: Shows the remote control with numbered buttons and sticks.

Functions:

1. Throttle Control Stick: Click once to switch between Low/Medium/High speed. Press the button to adjust the desired mode; the light will flash. Press the button again to cancel Trim mode.
2. Direction Joystick: Press and hold for 2 seconds to cancel GPS mode.
3. RTH (Return to Home) Button: Click once to activate RTH. Click again to cancel RTH mode. Press and hold for 2 seconds to activate Headless mode (useful for beginners).
4. ON/OFF Switch
5. One-Key Takeoff/Landing Button: Short press to activate takeoff/landing. Press and hold for 2 seconds to activate emergency stop.
6. LED Display Screen
7. Phone Holder
8. Follow Me Mode Button
9. Photo/Video Button: Click to take a photo or press and hold for 2 seconds to record video.
10. Camera Up Control
11. Camera Down Control
12. USB Charging Port

Operation Method:

• Throttle Stick: Up/Down (Increase/Decrease Altitude)
• Direction Stick: Forward/Backward (Pitch), Left/Right (Yaw/Turn)

Safe Flight

General Guidelines:

• Avoid flying near or over people, obstacles, crowds, high/medium voltage power lines, buildings, trees, airports, or water.
• Do not fly near strong electromagnetic field sources like power lines or substations, as they can interfere with the compass.

Recommended Flight Conditions:

• Fly in open areas ✔️.
• Ensure good GPS signal ✔️.
• Ensure correct visualization ✔️.
• Fly below 120 meters altitude ✔️.

Conditions to Avoid:

• Do not use the drone in adverse weather conditions such as wind, rain, snow, or fog.
• Avoid flying with winds exceeding 10m/s (approx. 22mph).
• Do not fly in restricted zones ❌.

Always maintain a safe distance from rotating propellers and motors ⚠️.

It is important to understand basic flight guidelines for the safety of yourself and others. Always read the safety guidelines before flight.

Flight

Software Download and Installation:

• Scan the QR code for the "Potensic-G" software for iOS or Android systems to install the app.

Connecting to the Drone:

• Turn on the drone.
• On your mobile device, go to "Settings" and search for "WIFI".
• Find and connect to "Potensic_XXX". If your phone indicates no internet connection, select "Keep WLAN connection".
• Open the "Potensic-G" app on your phone to access the control interface.

Wait until the Drone status indicates "Ready to Fly" before initiating flight. This ensures your GPS is synchronized and the drone is ready.

App Interface Description: Shows icons for Follow Me, Record, Return Menu, Take Photo, Auto Takeoff, Take Video, Auto Landing, Waiting for GPS Signal, Drone Status, Controls ON/OFF, VR Screen Switch, In-flight Recording. Displays flight data like Distance (D), Height (H), Horizontal Speed (DS), Vertical Speed (VS), Remote Battery status, GPS Signal Indicator, and Drone Battery status.

Shared Functions with One Button in the App:

• Open the app, navigate to the file/album section.
• Select photos or videos to share.
• Choose sharing platforms.
• Reminder: You can share 1 to 9 photos at a time, but only one video at a time.

Takeoff / Landing / Emergency Stop

Diagram description: Shows drone hovering about 5 feet off the ground.

Caution: Rotating propellers can be dangerous. Do not start the motors when people are nearby.

• Takeoff: Press the takeoff button ▶️. The propellers will spin, and the drone will lift off to approximately 5 feet. Always keep the drone's front facing forward.
• Landing: Press the landing button ⬇️. The drone will land automatically. Keep your hands on the transmitter while the motors are still running.
• Emergency Stop: Press and hold the button for 3 seconds. This function should only be used in emergencies during flight to reduce the risk of damage or injury.

Follow Me Mode

When Follow Me mode is active, the drone will follow your smartphone's GPS. To activate:

1. Position the drone at least 10 feet high and 100 feet away.
2. Click the button on the transmitter or in the app interface.
3. Wait for the drone status in the "Potensic-G" app to show "Follow Me Ready". The drone will now follow your phone's coordinates.
4. To exit Follow Me mode, click the button on the transmitter or in the app interface again.

Common Issues: Follow Me mode may not activate if the phone's GPS signal is too weak due to buildings, trees, or surrounding mobile phone congestion. Use in an open area and be aware of your surroundings. The drone is NOT equipped with obstacle avoidance.

Tap Fly

This function can be activated when the drone is in GPS mode.

1. Open the app interface on your mobile phone and tap the map icon.
2. Map coordinates will appear.
3. Tap a point within the effective WIFI range on the map, then tap the fly button to fly point-to-point.

Diagram description: Shows the app interface with map coordinates and flight path selection.

Return to Home (RTH)

The RTH function returns the drone to the last recorded point. There are three types of RTH: Intelligent RTH, Low Battery RTH, and Failsafe RTH.

1. Home (Intelligent RTH): Press the "Return to Home" button on your transmitter or tap the RTH button in the app. The transmitter will beep, and your drone will return to the takeoff point. Press the button again to stop the RTH procedure. Lower the throttle to land the drone safely.
2. Low Battery RTH: This activates when the flight battery level is low. The drone will fly back to a point approximately 100 feet away, and you can still control it. Lower the throttle to land safely. If the drone's power is completely depleted, it will return to the configured Takeoff point.
3. Failsafe RTH: The drone will enter failsafe mode if the transmitter signal is lost. Reconnect the transmitter to the drone if it comes back into view. Lower the throttle to land the drone safely.

WARNING: This drone is NOT equipped with obstacle avoidance.

Headless Mode

Press the transmitter button to enter Headless mode. Press and hold the transmitter button for 2 seconds to activate HEADLESS mode.

In Headless mode, the forward direction is always relative to the pilot's position when the drone was paired. Pushing the direction joystick forward makes the drone fly forward, backward makes it fly back, left makes it fly left, and right makes it fly right, all relative to the pilot. It is crucial not to change the pilot's position or orientation, as this will cause confusion for the drone.

Diagram description: Shows directional arrows indicating control inputs and their resulting drone movements in Headless mode, emphasizing relative directions.

Trim Mode (No GPS)

This function is only usable in No GPS mode. Trimming is not necessary in GPS mode.

If the drone drifts sideways automatically in No GPS mode, press the left joystick to enter TRIM mode for balanced flight. If the drone drifts left, push the direction joystick right to correct; if it drifts right, push left. Press the left joystick again to exit Trim mode.

How to Find a Lost Drone

Continuously press the button 3 times to open the MAP surface and search for the drone.

The last known position of the lost drone will appear on the map.

Diagram description: Shows the app interface with a map displaying the drone's last known location and the current mobile phone position.

Camera Functions

Press the transmitter button or click the camera indicator in the app. The red indicator will flash once, indicating the camera is taking a photo. Press the transmitter button or tap the app again; the red indicator will continue flashing, indicating the camera is recording video. Press again to save the video. Do not take photos while recording video.

App Icons Description: Shows icons for "Take Photo" and "Take Video".

Note: When using the "Potensic-G" app, original photos and videos are compressed and saved to the mobile phone. Original images and videos are saved on the TF card. Gently press the TF card to eject it, then insert it into a card reader and connect it to a computer's USB port to read the TF card data. Images can also be viewed in the app.

Diagram description: Shows a TF card and a USB card reader.

Specifications

Drone

• MODEL: T25
• Weight (including battery): 185 g / 6.5 oz
• Flight Time: 10 minutes
• WIFI Distance: 100-150 m / up to 300 m (outdoors, unobstructed, depends on conditions and mobile device)
• Motor Model: 1020
• Hovering: Activated
• Operating Temperature Range: 32-104 °F (0-40 °C)
• Satellite Systems: GPS / GLONASS
• Dimensions: 270 x 270 x 120 mm

Gimbal

• Controllable Range: Pitch: -75° to 0°

Camera

• Lens: FOV 120° / 2.0
• Still Photography Modes: Single shot
• Photo Format: JPEG
• Video Format: AVI
• Compatible SD Cards: TF Card 8 GB (not included)
• Operating Temperature: 32-104 °F (0-40 °C)

APP / Live View

• Mobile Application: Potensic-G
• Live View Operating Frequency: 2.4 GHz ISM
• Latency: Low video latency (depends on conditions and mobile device)
• Required Operating Systems: iOS 8.0 or later / Android 4.4.4 or later
• Recommended Devices: 4.7" to 5.5" smartphones

Transmitter

• Operating Frequency: 2.4 GHz
• Max Transmission Distance: 300 m (outdoors, unobstructed)
• Operating Voltage: 3.7 V
• Device Compatibility: 4.7" to 5.5" mobile devices
• Operating Temperature: 32-104 °F (0-40 °C)

Flight Battery

• Capacity: 1000 mAh
• Voltage: 3.7 V
• Battery Type: Lipo
• Energy: 18.5 Wh
• Net Weight: 40 g / 1.4 oz
• Max Charging Power: 5-10W
• Max Charging Time: Approx. 60 minutes (depending on charging power)
• Charging Temperature Range: 14-104 °F (-10-40 °C)

USB Cable

• Voltage: 5V
• Rated Power: ≤10 W

Parts List (Included)

Common Problems and Resolution

Manufacturer Information

Manufacturer: Shenzhen Deepsea Innovation Technology Co., Ltd.

Address: Room 1901, Jinqizhigu Building, Tangling Road, Nanshan District, Shenzhen, CN

EC REP 1: Like Sun GmbH. Planckstr.59, 45147 Essen, Germany

EC REP 2: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK

FCC ID: ZKWUA221803001

Made in China

Regulatory marks and certifications are present.