Operating Instructions for CLIKR™-5 Cable Remote Control UR5U-8820L

1 Introduction

The CLIKR™-5 UR5U-8820 is designed to operate the Motorola, Scientific-Atlanta, Pioneer, Pace Micro and Samsung digital set tops, plus the majority of TV, VCR, DVD and AUDIO equipment on the market as shown below.

CABLE: Cable Converters
TV: Televisions
VCR: VCRs and TV/VCRs
DVD: DVD Players
AUX: Audio Receivers and DVRs, etc.

2 Replacing Batteries

Before you program or operate the remote control, you must install two new AA alkaline batteries.

STEP 1: Remove the battery compartment cover on the back of your remote control.
STEP 2: Check battery polarity carefully, and install the batteries as shown in the illustration below.
STEP 3: Replace the battery compartment cover.

3 Operations

DEFAULT STATE:

Component Default: CABLE channel and numbers through the CABLE. You have the option of controlling your CABLE channel and numbers through the TV or VCR. Refer to section F for programming steps.
Volume Default: CABLE volume and mute through the CABLE. You have the option of controlling your CABLE volume and mute through the TV, VCR or DVD. Refer to section G for programming steps.

4 Button Functions

This section describes the functions of the buttons on the remote control. A diagram of the remote control shows the layout of these buttons.

Diagram Description: The remote control features a central directional pad with OK/SEL button. Above this are the System, Power, CBL, TV, VCR, DVD, and AUX buttons. Below the directional pad are the Mute, Volume Up/Down, Channel Up/Down, Last Channel, and Number Pad (0-9, Enter, Clear). Other buttons include Info, Menu, Exit, Play, Stop, Pause, Rewind, Fast Forward, Record, and Setup.

5 Programming the Remote Control

There are two ways you can program your CLIKR™-5 remote:

The Pre-Programmed 3-Digit Code Method
The Auto-Search Method

The Pre-Programmed Code Method allows you to set up all the buttons at once by entering 3-digit code numbers that correspond to a particular Component's manufacturer/brand, so it's the fastest and easiest of the two methods. (Code Tables are on the backside of this Instruction Sheet.) The Auto-Search Method scans through all the codes in the remote control, one at a time.

IMPORTANT SETUP NOTE! This pertains to all programming steps. When you are in setup mode, a component LED will light for 30 seconds. If you do not press a button within 30 seconds, the LED light will turn off and exit setup mode, and you will need to start over.

A. Pre-Programmed 3-Digit Code Method

Turn on the Component you want to program (TV, VCR, DVD or AUX).
Press the [COMPONENT] button (TV, VCR, DVD or AUX) to be programmed and [OK/SEL] button simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds indicating the unit is ready to be programmed.
Point the remote control toward the Component and enter the 3-digit code number assigned to your brand. Note: If the 3-digit code number you just entered is correct, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off.
After you've entered the correct code number and the Component has turned Off, press the [POWER] button to turn the Component back On. Now it's time to test the VOLUME and MUTE buttons for the TV (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the functions do not work as they should, repeat from STEP 3 using the next 3-digit code number listed for that brand.
Once you have found the correct 3-digit code, save it by pressing the same [COMPONENT] button one more time. The Component LED light will blink twice to confirm that the code was successfully stored.

Now, program the rest of your Components by repeating STEPS 1-5.

Note: If the Pre-Programmed Method did not work, or if the Code Tables do not list your Component brand, use the Auto-Search Method as explained in Section B.

B. Auto-Search Method

Turn on the Component you want to program (TV, VCR, DVD or AUX).
Press the [COMPONENT] button (TV, VCR, DVD or AUX) to be programmed and [OK/SEL] button simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds indicating the unit is ready to be programmed.
Point the remote toward the Component and press the [CH Up] or [CH Down] button one step at a time or keep it pressed. The remote will emit a series of ON/OFF commands. Release the [CH Up] or [CH Down] button as soon as the Component turns Off.
Test functions. (Same as for 3-Digit Code Programming Method - Section A). If any of the functions do not work as they should, repeat from STEP 3 using [CH Up] or [CH Down] buttons to find the correct code.
Save the code. (Same as for 3-Digit Code Programming Method - Section A).

Now, repeat the Auto-Search Method for those Components you could not program earlier with the Pre-Programmed Method.

C. Finding a Component Button's Setup Code Number

If you used the Auto-Search Method to program a Component, you may not know what the correct code number is. Here is a way for you to identify the code number, so you can record it for future reference.

Press the [COMPONENT] button (TV, VCR, DVD or AUX) you want to verify and the [OK/SEL] button simultaneously for 3 seconds. The Component LED light will turn on for 30 seconds.
Press the [INFO] button and count the number of times the Component LED light blinks. This number indicates the first digit of the code, followed by the second and third, each separated by a one second pause when the LED will turn off. Note: 10 blinks represents the number zero. Example: One blink, (pause), eight blinks, (pause) and three blinks, indicates code number 183.

D. AUX Function: Programming a 5th Component

You can take advantage of the AUX function to program a 5th Component such as a second TV, VCR, DVD or Audio Component.

Turn on the 5th Component you want to program (TV, VCR, DVD or Audio).
Press the [AUX] button and the [OK/SEL] button simultaneously for 3 seconds. The [AUX] Component LED will turn on for 30 seconds.
Press the [COMPONENT] button you want to setup. Point the remote control toward the Component and enter the 3-digit code number assigned to your brand. Note: If the 3-digit code number you just entered is the correct number, the Component will turn Off. If it did not turn Off, continue entering code numbers listed for that brand until the Component turns Off.
Test functions. (Same as for 3-Digit Code Programming Method - Section A). If any of the functions do not work as they should, you need to find a new code.
Once you have found the correct 3-digit code, save it by pressing the [AUX] button one more time. The Component LED light will blink twice to confirm the code was stored. Now when you press the AUX button, all the buttons will work with that 5th Component.

E. Programming the System On/Off Button

This allows you to program the System On/Off button so it can send up to five power On/Off commands with one button press.

Press the [CBL] button.
Press the [SYSTEM ON/OFF] button and the [OK/SEL] button simultaneously for 3 seconds. The [CBL] button will turn on for 30 seconds.
Press the first [COMPONENT] button you want to store in the [SYSTEM ON/OFF] button and then the [POWER] button. Repeat this for other Components until you have stored all the desired power commands into the [SYSTEM ON/OFF] button.
Press the [CH+] button to save the power commands you stored. The [CBL] button will blink twice to confirm the commands have been saved.

F. Programming Channel Control

You can program the channel controls (Channel Up, Channel Down, Last and Numbers) from one Component to operate in another Component mode. Default channel control settings on the remote control are as follows:

CBL : CBL
TV : CBL
VCR : CBL
DVD : DVD
AUX : AUX

If you wish to store the TV channel control in TV mode, use the following steps.

Press the [TV] button and the [OK/SEL] button simultaneously for 3 seconds. The [TV] Component LED will turn on for 30 seconds.
Press the [VOL -] button.
Press the [TV] button again. The Component LED will blink twice to confirm the programming.

To return to original state: If you wish to restore the CABLE channel control in TV mode, repeat the above steps but press [CBL] in STEP 3.

G. Programming Volume Control

You can program the volume controls (Volume Up, Volume Down and Mute) from one Component to operate in another Component mode. Default volume control settings on the remote control are as follows:

CBL : CBL
TV : TV
VCR : TV
DVD : TV
AUX : AUX

If you wish to store the TV volume control in CBL mode, use the following steps.

Press the [CBL] button and the [OK/SEL] button simultaneously for 3 seconds. The [CBL] Component LED will turn on for 30 seconds.
Press the [VOL +] button.
Press the [TV] button. The Component LED will blink twice to confirm the programming.

To return to original state: If you wish to restore the CBL volume control in CBL mode, repeat the above steps but press [CBL] in STEP 3.

H. Programming a `Macro' button.

In CABLE mode, the M button can be programmed to act as a `Macro'. This allows you to program from one up to three separate channels that can be accessed by simply pressing the programmed Macro button.

Press the [CBL] button to select the CBL mode.
Press the [M] button and [OK/SEL] button simultaneously for 3 seconds. The [CBL] button will turn on for 30 seconds.
Enter the 3 or 4-digit code for the channel you want programmed first (for example, 007) using the Number Pad, then press the [STOP] button. Then enter the code for the next channel (for example, 050), then press the [STOP] button. Repeat this process for the third channel. The [CBL] button will blink once for each channel entered.
Press the [CH+] button to store the channels that were selected. The [CBL] button will blink twice to confirm the storage of commands.

To access the programmed channels, press the [M] button once. This will bring up the first channel. Press once again and it will bring up the second channel. Press again and it will bring up the third channel.

I. Low Battery Warning

When the batteries are low and need to be replaced with fresh batteries, the Component LED lights will blink 2 times in sequence whenever a [POWER] button is pressed to turn on equipment.

J. Memory Lock System

This remote control is designed to retain programmed memory for 10 years even after batteries are removed from the remote control.

K. Record Your Component Set-up Codes

Use the fields below to record your component setup codes for future reference.

Component Type	Set-Up Code Number
TV
VCR
DVD
AUX

6 Set-up Code Tables

Use the following tables to find the 3-digit setup code for your specific device manufacturer.

CABLE Converter

Remote	Converter	Code No.
UR5U-8820L	Motorola	002
UR5U-8820L	Scientific-Atlanta, Pioneer, Pace Micro, Samsung	001

TV

Manufacturer/Brand	Set-Up Code Number
ABEX	025
ADMIRAL	072
ADVENT	161
ADVENTURA	160
AIKO	251
ALERON	247
AKAI	388
A MARK	002
AMERICA ACTION	103
AMPRO	028
AMSTRAD	197
ANAM	146
AOC	248
APEX DIGITAL	404
ASTAR	405
AUDIOVOX	473
AVION	475
BARCO	323
BELCOR	387
BELL&HOWELL	391
BLAUPUNKT	112
BRADFORD	143
BROKSONIC	043
BROCKWOOD	167
CAIRN	073
CANDLE	052
CAPEHART	043
CELEBRITY	054
CENTURION	056
CETRONIC	080
CITIZEN	112
CLARION	197
CLASSIC CLP	112
CLASSIC COLORTYME	058
CONCIERGE	363
CONCERTO	006
CONTEC	477
CORNEA	076
CORONADO	454
CRAIG	388
CROSLEY	441
CROWN	233
CURTIS MATHES	116
CXC	161
DAEWOO	072
DAYTRON	088
DELL	043
DIMENSIA	238
DREAMVISION	116
DUKANE	201
DUMONT	197
DURABRAND	002
DWIN	003
DYNASTY	363
DYNATECH	058
DYNEX	070
EIKI	197
ELECTROBAND	043
ELECTROGRAPH	197
ELECTROHOME	002
ELEKTRA	003
ELEMENT	043
EMERSON	101
ENVISION	103
ESA	143
FISHER	363
FUJITSU	043
FUNAI	043
FUTURETECH	161
GATEWAY	116
GE	197
GEM	073
GIBRALTER	363
GOLDSTAR	043
GRUNPY	050
HAIER	051
HALL MARK	116
HARLEY DAVIDSON	143
HARVARD	043
HAVERMY	054
HELLO KITTY	164
HIMITSU	043
HISENSE	143
HITACHI	197
HP	101
ILO	143
INFINITY	363
INFOCUS	043
INSIGNIA	016
INTEQ	043
JANEIL	044
JBL	076
JCB	103
JCPENNEY	114
JENSEN	125
JVC	143
KAWASHO	363
KEC	143
KENWOOD	363
KLEGG	320
KLOSS	319
KLOSS NOVABEAM	284
KMC	363
KONKA	161
KTV	235
KURAZAI	025
LG	011
LODGENET	116
LOEWE	073
LOGIK	096
LUXMAN	177
LXI	257
MAGNAVOX	043
MAJESTIC	062
MARANTZ	400
MATSUI	187
MATSUSHITA	070
MAXENT	466
MEMOREX	024
METZ	076
MGA	196
MIDLAND	072
MINERVA	363
MINTEK	494
MINUTZ	028
MITSUBISHI	048
MONTGOMERY WARD	043
MOTOROLA	155
MTC	005
MULTITECH	197
NAD	047
NEC	050
NET TV	051
NIKEI	076
NIKKO	096
NORCENT	143
NTC	151
NUVISION	153
OLEVIA	154
ONKING	363
ONWA	116
OPTIUM	197
OPTONICA	323
OPTOMA	007
ORION	057
PANASONIC	246
PHILCO	198
PHILIPS	346
PILOT	028
PIONEER	043
POLAROID	052
PORTLAND	043
PRISM	242
PROSCAN	268
PROTON	025
PROTRON	011
PROVIEW	116
PULSAR	073
QUASAR	096
RADIO SHACK	177
RCA	257
REALISTIC	043
ROCTEC	062
RUNCO	400
SAMPO	187
SAMSUNG	070
SAMSUX	466
SANSEI	143
SANSUI	024
SANYO	076
SCEPTRE	196
SCOTCH	072
SCOTT	363
SEARS	494
SELECO	028
SHARP	048
SHENG CHIA	043
SHOGUN	155
SIEMENS	005
SIGNATURE	197
SIMPSON	047
SOLE	050
SONY	051
SOUNDESIGN	076
SPECTRICON	096
SPECTRONIQ	143
SQUAREVIEW	151
STARLITE	153
SSS	154
SUPRA	363
SUPRE MACY	116
SUPREME	197
SVA	323
SYLVANIA	007
SYMPHONIC	057
SYNTAX	246
OLEVIA	198
TANDY	346
TATUNG	028
TECHNICS	043
TECHNOL ACE	052
TECHWOOD	043
TEKNIKA	242
TELEFUNKEN	268
TELERENT	025
TERA	011
TMK	044
TNCI	076
TOSHIBA	103
TOTEVISION	114
TVS	125
UNIVERSAL	143
VICTOR	363
VIDEO CONCEPTS	143
VIDIKRON	363
VIDTECH	320
VIEWSONIC	319
VIKING	284
VIORE	363
VITO	161
VIZIO	235
WARDS	025
WAYCON	011
WESTINGHOUSE	116
YAMAHA	073
YORK	096
YUPITERU	177
ZENITH	257
ZONDA	043

VCR

Manufacturer/Brand	Set-Up Code Number
ADMIRAL	025
ADVENTURA	053
AIKO	034
AIWA	161
AKAI	016
AMERICA ACTION	146
AMERICAN HIGH	043
AMPRO	046
ANAM	124
ASHA	125
AUDIO DYNAMICS	117
AUDIOVOX	145
BEAUMARK	072
BROKSONIC	145
CALIX	102
CANON	012
CAPEHART	023
CCE	039
CITIZEN	043
COLT	101
CRAIG	102
CURTIS MATHES	035
CYBERNEX	037
DAEWOO	129
DAYTRON	101
DBX	028
DYNATECH	145
ELECTROHOME	108
ELECTROPHONIC	024
EMERSON	117
FISHER	101
FUJI	117
FUNAI	024
GARRARD	003
GE	022
GO VIDEO	102
GOLDSTAR	041
GRADIENTE	145
HARLEY DAVIDSON	102
HARMAN KARDON	111
HARWOOD	116
HITACHI	117
HQ	005
INSTANTREPLAY	007
JCL	010
JCPENNEY	065
JENSEN	108
JVC	110
KEC	120
KENWOOD	108
KLH	012
KODAK	023
LG	039
LLOYD	043
LOGIK	101
LXI	102
MAGIN	043
MAGNAVOX	145
MARANTZ	101
MARTA	053
MATSUI	059
MATSUSHITA	101
MEI	006
MEMOREX	029
MGA	035
MGN TECHNOLOGY	017
MINOLTA	025
MITSUBISHI	027
MOTOROLA	034
MTC	036
MULTITECH	037
NEC	046
NIKKO	101
NOBLEX	129
NORDMENDE	131
OLYMPUS	153
OPTIMUS	162
OPTONICA	116
ORION	145
PANASONIC	003
PENTAX	010
PHILCO	008
PHILIPS	009
PILOT	145
PIONEER	034
PORTLAND	034
PROFITRONIC	072
PROTEC	147
PULSAR	063
QUARTZ	107
QUASAR	109
RADIO SHACK	144
RADIX	145
RANDEX	132
RCA	136
REALISTIC	155
RICO	115
RUNCO	102
SALORA	101
SAMSUNG	106
SANKY	114
SANSUI	020
SANYO	012
SCOTT	123
SEARS	034
SHARP	034
SHINTOM	012
SHOGUN	045
SIGNATURE	024
SINGER	004
SONY	026
SOUNDESIGN	150
STS	018
SYLVANIA	034
SYMPHONIC	043
TANDY	063
TATUNG	137
TEAC	160
TECHNICS	020
TEKNIKA	034
THOMAS	145
TMK	145
TOSHIBA	101
TOTEVISION	003
UNITECH	008
VECTOR RESEARCH	010
VICTOR	014
VIDEO CONCEPTS	034
VIDEOSONIC	053
VILLAIN	054
WARDS	101
WESTINGHOUSE	102
XR-1000	145
YAMAHA	058
ZENITH	148

VCR-TV/VCR Combos

Manufacturer/Brand	Set-Up Code Number
AMERICA ACTION	117
DURABRAND	005
EMERSON	117
FUNAI	153
GOLDSTAR	034
HARLEY DAVIDSON	101
HITACHI	123
JCPENNEY	034
LG	034
LLOYD	101
MAGNAVOX	101
MEMOREX	123
PANASONIC	034
PHILIPS	101
RADIO SHACK	057
RCA	154
SEARS	067
SONY	034
SYLVANIA	034
SYMPHONIC	034
THOMAS	034
ZENITH	034

DVD

Manufacturer/Brand	Set-Up Code Number
AIWA	146
AKAI	281
ALLEGRO	091
ALPINE	098
APEX DIGITAL	087
BLAUPUNKT	111
BROKSONIC	115
CINEVISION	111
COBY	130
CYBERHOME	091
DENON	260
DURABRAND	271
DVD 2000	080
EMERSON	173
ENTERPRISE	138
FISHER	091
FUNAI	017
GE	091
GOLDSTAR	143
GO VIDEO	074
GREENHILL	147
HARMAN KARDON	143
HITACHI	027
HITEKER	091
ILO	137
INITIAL	091
INTEGRA	220
JBL	221
JVC	222
KENWOOD	111
KISS	084
KLH	140
KRELL	101
LITEON	087
LEXICON	268
LG	111
MAGNAVOX	142
MARANTZ	180
MALATA	280
MERIDIAN	084
MICROSOFT	012
MINTEK	151
MITSUBISHI	279
MYRYAD	135
NAD	104
NAKAMICHI	264
NESA	265
ONKYO	148
OPTIMUS	091
OPPO	057
ORION	074
PANASONIC	066
PARASOUND	083
PHILIPS	095
PHILIPS MAGNAVOX	267
PIONEER	153
POLAROID	027
POLK AUDIO	206
PROCEED	111
PROSCAN	282
RCA	017
RIO	102
RJTECH	134
SAMSUNG	088
SANSUI	103
SANYO	111
SEARS	076
SENSORY SCIENCE	141
SHARP	180
SHERWOOD	023
SHINSONIC	266
SONIC BLUE	130
SONY	042
SPECTRONIQ	138
SYLVANIA	144
SYMPHONIC	150
TATUNG	285
TEAC	245
TECHNICS	066
TECHWOOD	083
THETA DIGITAL	095
THOMPSON	105
TOSHIBA	166
URBAN CONCEPTS	276
VENTURER	141
VINC	066
X-BOX	023
YAMAHA	099
ZENITH	131

DVD-DVD Recorders

Manufacturer/Brand	Set-Up Code Number
GO VIDEO	220
CYBERHOME	221
ILO	222
KISS	271
LITEON	268
PANASONIC	279
SAMSUNG	265
SENSORY SCIENCE	138
SONY	301
TOSHIBA	222
ZENITH	191
188	273

DVD-TV/DVD Combos

Manufacturer/Brand	Set-Up Code Number
AKAI	281
AIWA	146
AUDIOVOX	284
DURABRAND	143
ESA	143
FUNAI	143
INSIGNIA	292
MINTEK	297
POLAROID	282
SAMSUNG	284
SYLVANIA	295
SYMPHONIC	297
SV2000	165
TOSHIBA	143
TRUTECH	130
293	143

DVD-TV/DVD/VCR Combos

Manufacturer/Brand	Set-Up Code Number
EMERSON	143
MAGNAVOX	143
PANASONIC	144
SUPERSCAN	143
SYLVANIA	143
TOSHIBA	164

DVD-DVD/VCR Combos

Manufacturer/Brand	Set-Up Code Number
GO VIDEO	137
PANASONIC	150
PHILIPS	105
SAMSUNG	137
SANSUI	159
SONY	154
TOSHIBA	145
ZENITH	141

AUX-AUDIO

Manufacturer/Brand	Set-Up Code Number
ADC	007
ADCOM	082
AIWA	092
AKAI	225
AMC	161
ANGSTROM	269
ANTHEM	356
ARAGON	170
ARCAM	018
ATLANTIC TECHNOLOGY	104
AUDIO FILE	202
AUDIO MATRIX	203
AUDIO TECHNICA	213
B & K	211
BOSE	188
BOSTON ACOUSTICS	189
CAMBRIGE AUDIO	125
CARVER	126
CINEMA SOUND	127
CITATION	281
CLARION	282
DELPHI	142
DENON	335
ELAN	337
ENLIGHTENED AUDIO	687
FISHER	141
FLEXTRONICS	077
FOSGATE AUDIONICS	342
GE	071
GOLDSTAR	167
HARMAN KARDON	134
HITACHI	096
INSIGNIA	097
INTEGRA	070
JAMO	170
JCPENNEY	224
JENSEN	347
JVC	409
KENWOOD	460
KLEGG	447
KLH	684
KLIPSCH	006
KOSS	028
KRELL	061
KYOCERA	071
LEXICON	201
LINN	214
LUXMAN	226
LXI	185
MAGNAVOX	013
MARANTZ	077
MCINTOSH	284
MERIDIAN	134
MITSUBISHI	148
MONDIAL	056
MYRYAD	008
NAD	148
NAKAMICHI	233
NEC	077
NIRO	028
NILES	118
ONKYO	318
OPTIMUS	020
OUTLAW	589
PANASONIC	275
PARASOUND	017
PHILIPS	046
PIONEER	108
POLKAUDIO	080
PROCEED	209
RCA	398
REALISTIC	216
ROTEL	058
SAMSUNG	163
SANSUI	191
SANYO	114
SCOTT	279
SHARP	291
SHERWOOD	026
SIRIUS	066
SONY	145
SOUNDESIGN	192
SSI	182
SUNFIRE	005
TEAC	280
TECHNICS	374
THETA DIGITAL	686
TOSHIBA	331
XM SATELLITE RADIO	687
YAMAHA	216
ZENITH	573

AUX-DVR(TIVO)

Manufacturer/Brand	Set-Up Code Number
HUGHES	817
HUMAX	817
PHILIPS	790
RCA	817
REPLAY NETWORKS	809
SONY	775
TIVO	804
TOSHIBA	805
817	817

	CLIKR-5 Universal Remote Control Operating Instructions and Setup Codes Comprehensive operating instructions and setup code tables for the CLIKR-5 UR5U-8780L & UR5U-8790L universal cable remote control by Universal Remote Control, Inc. Learn how to program your remote for various devices including TVs, VCRs, DVDs, and audio equipment.
	CLIKR-5 Universal Remote Control Operating Instructions This document provides comprehensive operating instructions for the CLIKR-5 universal remote control (models UR5U-8780L & UR5U-8790L), detailing setup procedures, button functions, and extensive code tables for various audio-visual equipment.
	CLIKR™-5 Cable Remote Control Operating Instructions (UR5U-8700L & UR5U-8720L) Comprehensive operating instructions and setup guide for the CLIKR™-5 Cable Remote Control (UR5U-8700L & UR5U-8720L) by Universal Remote Control, Inc. Learn how to replace batteries, program your remote using 3-digit codes or auto-search, and manage various device functions.
	CLIKR-5 Universal Remote Control Operating Instructions Comprehensive guide to operating and programming the CLIKR-5 universal remote control, including setup methods, button functions, and device code tables.
	UR3L-SR4 Universal Remote Control Operating Manual Comprehensive operating manual for the UR3L-SR4 Universal Remote Control, detailing setup, programming methods (Quick Setup, Manual, Auto Search), learning functions, and advanced features for controlling cable boxes, TVs, and DVDs.
	UR4U-MDVR2 4-Function Cable Remote Control Operating Instructions Get detailed operating instructions for the Universal Remote Control UR4U-MDVR2. This guide covers setup, programming, and features for controlling your cable box, TV, DVD player, and audio devices. Learn how to easily program your remote for optimal home entertainment.
	CLIKR-5 Universal Remote Control Operating Instructions User manual for the CLIKR-5 Universal Remote Control (UR5U-8780L & UR5U-8790L) by Universal Remote Control, Inc., detailing setup, programming, and operation for various audio-visual devices.
	Universal Remote Control UR3-SR3 Easy Clicker Operating Manual Comprehensive operating manual for the Universal Remote Control UR3-SR3 Easy Clicker, detailing setup, programming, button functions, and code tables for various devices like TVs, Cable Boxes, VCRs, and DVD players.