MALM

Important Safety Information

⚠️ WARNING

Serious or fatal crushing injuries can occur from furniture tip-over.

ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer. ⚖️
• Do not set TVs or other heavy objects on top of this product. ?
• Never let children climb or hang on drawers, doors, or shelves. ?‍♂️

(Note: This section is a summary of warnings presented in multiple languages in the original document. Always refer to the specific language instructions for full details.)

Tools and Wall Mounting Guidance

The following tools are typically required for assembly and wall mounting:

• Screwdrivers ?
• Hammer ?
• Pencil ✏️
• Drill ? (for wall mounting)
• Wrench ?

Wall mounting requires appropriate fixings for your wall type:

Wall Type Guide:

• A: Solid Walls - Use screws and plugs. Drill bit size: Ø 8 mm (5/16").
• B: Hollow Walls - Use screws and plugs. Drill bit size: Ø 3 mm (1/8").
• C: Solid Wood Walls - Use screws without plugs.

Diagram Description: Illustrations show how to drill holes and insert screws/plugs appropriate for solid walls (A), hollow walls (B), and solid wood (C).

Parts List

Assembly Instructions

Step 1

Attach two wooden dowels (101353) into the pre-drilled holes on one of the long panels. Insert four long threaded bolts (114334) into the corresponding holes on the same panel. Use the wrench (113453) to tighten the bolts.

Diagram Description: Shows a long panel with dowels and bolts being inserted and tightened.

Step 2

Attach two drawer slide components (118250) to the side panels using small screws (100349). Ensure they are oriented correctly.

Diagram Description: Shows two side panels with drawer slide components being screwed into place.

Step 3

Insert two wooden dowels (101353) into the pre-drilled holes on the second long panel. Attach this panel to the base panel, aligning the dowels and holes.

Diagram Description: Shows a base panel and a second long panel being joined using dowels.

Step 4

Attach two plastic brackets (122998) and two metal brackets (114254) to the side panels using the wrench (113453) and cam lock screws (110519). Insert cam lock fittings (118331) into the corresponding holes and turn to lock.

Diagram Description: Shows brackets being attached to the side panels using cam lock mechanisms.

Step 5

Attach two connecting pieces (153548) to the top of the side panels using screws (110519) and plastic connectors (122998). Use a hammer to tap them into place.

Diagram Description: Shows connecting pieces being attached to the top of the side panels.

Step 6

Attach wall brackets (106989) to the back of the assembled frame using screws (109049) and wall plugs (100823). Ensure the brackets are securely fastened.

Diagram Description: Shows wall brackets being screwed into the back of the furniture frame, with an illustration of wall plug insertion.

Step 7

Place the top surface (glass or wood) onto the assembled frame. Ensure it is aligned correctly.

Diagram Description: Shows the top surface being placed onto the main body of the desk.

Step 8

Attach three mounting plates (10003193) to the underside of the top surface using screws (109560).

Diagram Description: Shows mounting plates being screwed into the underside of the desk top.

Step 9

Secure the top surface to the frame by attaching the mounting plates (10003193) to the frame using screws (109560). Rotate the screws to tighten.

Diagram Description: Shows the top surface being secured to the frame with screws.

Step 10

Attach two drawer slide components (118250) to the inside of the desk frame using screws (100349).

Diagram Description: Shows drawer slide components being attached to the inner sides of the desk frame.

Step 11

This step appears to be a confirmation or preparation for wall mounting. The 'X' marks on the wall indicate potential mounting points.

Diagram Description: Shows the assembled desk frame, with 'X' marks on the wall indicating potential mounting points.

Step 12

This step shows the wall mounting bracket being attached to the wall. It involves inserting screws (109049) into wall plugs (326949) and securing the bracket (106989).

Diagram Description: Detailed view of attaching a wall bracket to the wall using screws and plugs.

Step 13

Attach the furniture to the wall using the wall brackets. Insert screws (109048) through the brackets and into the wall anchors (100823) already in the wall. Use the wrench (113453) to tighten.

Diagram Description: Shows the furniture being secured to the wall via the previously attached brackets.

Step 14

Attach two drawer slide components (118331) to the drawer sides using screws (100349).

Diagram Description: Shows drawer slide components being attached to the sides of a drawer panel.

Step 15

Insert two wooden dowels (101345) into the pre-drilled holes on the drawer front panel. Attach the drawer side panels to the drawer front.

Diagram Description: Shows dowels being inserted into a drawer front panel and side panels being attached.

Step 16

Attach two cam lock nuts (110630) to the drawer side panels. Insert cam lock screws (110519) into the drawer front panel and tighten the cam locks to secure the drawer sides.

Diagram Description: Shows cam lock fittings being used to join drawer components.

Step 17

Attach a small bracket (105344) to the bottom of the drawer assembly using a screw.

Diagram Description: Shows a small bracket being screwed onto the bottom of the drawer assembly.

Step 18

Slide the drawer slide component (152123) into place on the drawer assembly. Ensure it is correctly oriented.

Diagram Description: Shows a drawer slide component being fitted onto the assembled drawer.

Step 19

This step shows a long, thin panel being inserted into the back of the desk structure. It might be a back panel or a support.

Diagram Description: Illustration shows a thin panel being slid into the back of the desk frame.

Step 20

Attach the drawer box to the main desk structure. Insert four cam lock screws (110519) into the drawer box and secure them using the cam lock fittings on the desk frame.

Diagram Description: Shows the drawer box being attached to the desk frame using cam lock fasteners.

Step 21

Attach a small bracket (105344) to the bottom of the drawer assembly, possibly for stability or to guide movement.

Diagram Description: Shows a small bracket being screwed onto the bottom of the drawer assembly.

Step 22

This step shows the drawer being inserted into the desk. Two drawer slide components are visible, indicating the drawer is being slid into place.

Diagram Description: Illustration shows the completed drawer being inserted into the desk unit.

Step 23

Adjust the drawer runners if necessary. This step shows turning a screw on the drawer runner to fine-tune the drawer's position or alignment.

Diagram Description: Close-up view of adjusting a screw on the drawer runner mechanism.

Step 24

This step shows the final assembled desk. The illustration implies the process is complete.

Diagram Description: Shows the fully assembled MALM desk.

For detailed information on wall mounting and ensuring stability, please refer to the specific wall-mounting instructions provided with the product and consult a professional if unsure.

Visit www.IKEA.com/secure-it or www.IKEA.cn/secure-it for more information.