One For All WM6629 Ultra Slim TV Wall Mount Installation Guide

Welcome

Thank you for purchasing this One For All product. The product you now have in your possession is made of durable materials and is based on a design, every detail of which has been meticulously thought out.

Product Specifications

Important Safety Information

Warning: Please verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.

Correct installation is extremely essential and falls outside the scope of responsibility of One For All. The fastening material provided is exclusively intended for installation on walls made of solid wood, bricks, concrete, or solid-wood columns with a maximum of 3 mm wall finishing. For walls made of other materials, such as hollow bricks, please consult your installer and/or specialist supplier. During installation, please also follow the instructions for installation and use of the apparatus to be installed/fixed (e.g., the LCD/LED/plasma screen).

Included Parts

• Wall Mounting Hardware:
• W-A: 4 x ST5.5x50mm screws
• W-B: 4 x 8x40mm screws
• W-C: 4 x Ø6mm wall plugs
• TV Mounting Hardware:
• M-A: 4 x M4x28mm screws
• M-B: 4 x M5x14mm screws
• M-C: 4 x M6x14mm screws
• M-D: 4 x M6x30mm screws
• M-E: 4 x M8x30mm screws
• M-F: 4 x M8x50mm screws
• M-G: 4 x D6mm screws (Note: OCR may have errors, this likely refers to a specific screw type)
• M-H: 8 x Ø15xØ8x5mm spacers/washers
• M-I: 8 x Ø15xØ8x15mm spacers/washers
• M-J: 4 x M8x12mm screws

Note: Please ensure you use the correct screws and spacers for your specific TV model. Refer to your TV's manual if unsure.

Installation Steps

Step 1: Prepare and Mark

Begin by attaching the 'DRILL GUIDE' to the wall at your desired height. Ensure it is level. The guide indicates the recommended hole positions for mounting the brackets.

Diagram Description: The diagram shows the drill guide being positioned on a brick wall, with indicators for hole placement. It also displays VESA compatibility specifications (80 kg maximum load, 400 x 600 mm maximum VESA pattern, and 20 mm depth).

Step 2: Drill Holes and Insert Plugs

Drill holes at the marked positions using an appropriate drill bit (e.g., 8mm for the provided wall plugs). Insert the wall plugs (W-C) firmly into the drilled holes.

Diagram Description: This step illustrates drilling into the wall using a drill, with specific dimensions noted (55 mm depth, 8 mm drill bit size). It shows the insertion of wall plugs (W-C) into the prepared holes.

Step 3: Mount Wall Brackets

Align the wall brackets (labeled 'A' in diagrams) with the prepared holes and secure them to the wall using the provided screws (W-A and/or W-B) through the wall plugs (W-C).

Diagram Description: Shows the wall brackets (A) being attached to the wall using screws (W-A, W-B) that pass through the wall plugs (W-C).

Step 4: Attach TV Brackets to TV

Attach the TV brackets (labeled 'B' in diagrams) to the back of your television. Use the appropriate screws (M-A through M-J) and any necessary spacers or washers. It is crucial to select the correct screw length and diameter to avoid damaging your TV.

Diagram Description: Illustrates the process of attaching the TV brackets (B) to the rear of a TV using various screws (M-A, M-B, M-C, M-D, M-E, M-F, M-J) and spacers (M-H, M-I).

Step 5: Hang TV on Wall Brackets

Carefully lift the TV and hook the attached TV brackets (B) onto the wall brackets (A). Ensure the TV is seated securely and level.

Diagram Description: Depicts the TV, with its brackets attached, being lifted and hung onto the wall brackets mounted on the wall.

Step 6: Secure and Finish

Confirm that the TV is properly seated and secure on the wall mount. Some mounts feature a locking mechanism for added safety; listen for a 'CLICK!' to confirm engagement. The 'RELEASE' button indicates how to disengage the mount.

Diagram Description: Shows the final securing of the TV to the wall mount. A 'CLICK!' sound is indicated for proper locking, and a 'RELEASE' button is shown for detachment. The 'FINISH' button signifies completion.

Guarantee Information

One For All provides a lifetime guarantee for defects in materials or manufacturing. To invoke the guarantee, the product must be sent to One For All along with the original purchase document (invoice, sales slip, or cash receipt). The purchase document must clearly show the supplier's name and the date of purchase. The One For All guarantee lapses if the product is not installed and used according to the instructions, if it has been altered or repaired by a party other than One For All, or if a fault arises due to external causes (e.g., lightning, water, fire, extreme temperatures, incorrect use, or negligence).

Manufacturer Information

Universal Electronics BV, Colosseum 2, 7521 PT Enschede, The Netherlands.

For more information and documents, visit: www.oneforall.com/documents

Please separate waste materials responsibly.