Televes Antena Ellipse Mix High-VHF/UHF (Repack Ready)
Intelligence taken to the limit
Product Description
The Ellipse Mix is an advanced over-the-air TV antenna that automatically adapts its gain in real time to optimize the reception of television signals, ensuring the optimum level of signal is delivered at all times. This latest repack-ready version has been completely redesigned from the ground up for the new US broadcast frequencies, filtering any interfering 5G signals above 608MHz, and providing independent amplification for the VHF and UHF bands.
The antenna is able to receive very weak signals while at the same time avoiding overload caused by very strong signals. The Ellipse Mix is a high gain directional antenna designed to offer stable and high quality reception of High VHF and UHF only (RF channels 7-36) in mid to long-range receiving scenarios despite continuous changes in weather and transmitting conditions thanks to its exclusive and intelligent built-in TForce amplifier. The Televes proprietary triple boom design ensures maximum raw gain in a compact and install friendly form factor suitable for outdoor or attic install. No additional preamplifier purchase is required as the antenna includes a best-in-class very low-noise TForce preamplifier built in right at the dipole with automatic gain control, plus FM and cellphone signal filtering adapting to any installation situation.
A low-consumption UL-listed power supply is included providing two outputs for convenient distribution to additional TV sets. Industry experts rave about the Ellipse Mix's exceptional performance and unparalleled manufacturing quality using only the finest materials (aluminum, stainless steel, ABS plastic), ensuring years of trouble-free operation in the most challenging environments. It ships in an eco-friendly compact package and assembles in less than 60 seconds. The Ellipse Mix is your best option for a compact high gain TV antenna with uncompromising performance.
Key Features
- Elegant cutting-edge design, built strong to withstand the harshest elements.
- FM and LTE/5G filtering eliminates radio and cellular phone interference.
- Designed as a compact, easy-to-install product for professionals and consumers alike (dimensions: 38.8 x 34 x 27 inches).
- Unlike most other antennas, the preamplifier, power supply, and LTE/5G filter are included, making Ellipse your best value.
- Built-in TForce preamplifier continuously analyzes TV signals received by the antenna to provide the optimum gain and delivered signal level at all times. Based on proprietary MMIC technology exclusive to Televes, offering unparalleled performance.
- In the event of power failure, the Ellipse Mix will continue to work in passive mode, bypassing the built-in antenna electronics. The antenna can operate in active (amp turned on) or passive mode (amp turned off).
- Made in Europe: Manufactured in a fully automated production and verification line that ensures the highest level of performance guarantee.
Technical Specifications
| Bands | High VHF (174-216 MHz) | UHF (470-608 MHz) | |
|---|---|---|---|
| Channels | 7-13 | 14-36 | |
| BOSS mode | ON / OFF | ON / OFF | |
| Gain (dBi) | 36.5 | 40 | |
| Output level | 96 | 132 | |
| Signal level of use | < 15 | < 15 | |
| Powering | 12 | 12 | |
| Max. current (mA) | 70 | 70 | |
| Beamwidth | 58 | 40 | |
| F/B ratio (dB) | 58 | > 20 | |
| Wind load (@80 miles/h) | N | ||
| Wind load (@93 miles/h) | N | ||
| Mast diameter (in) | 0.787 ... 1.969 |
Physical Data
| Value | |
|---|---|
| Net weight | 4,400.00 g |
| Gross weight | 4,400.00 g |
| Width | 986.00 mm |
| Height | 688.00 mm |
| Depth | 864.00 mm |
| Main product weight | 2,100.00 g |
Packaging Information
| Item | Quantity |
|---|---|
| Box | 1 pcs. |
| Box | 1 pcs. |
| Pallet | 14 pcs. |
Highlights
- The antenna has been completely redesigned for reception of TV signals on RF channels 7-36.
- Crystal clear TV reception enabled by a built-in T-Force preamplifier that automatically adjusts its gain independently for VHF and UHF signals for an optimum, no-compromise performance.
Graphic Documentation
Frequency Response
Graphs showing frequency response for BIII and UHF bands, illustrating gain (dBi) versus frequency (MHz).
Radiation Pattern
Polar plots illustrating the radiation pattern for BIII and UHF bands, showing signal strength in different directions (PE and PH).
Application Example
Diagram shows a typical installation setup with the Televes antenna connected to a DC power supply, which then distributes the signal to two televisions, one with a set-top box. The power supply has two 'DC ON' indicators.
