MIYOTA Cal. 2005 Instruction Manual
A) DISPLAY
The watch display includes indicators for Hour, Minute hand, Second hand, Date, and Day of the week. The crown has a normal position and two extended positions (1st and 2nd) for adjustments.
*Note: The position of the Date and Day of the week indicators may vary depending on the specific model.
B) SETTING THE TIME
- Pull the crown out to the 2nd position.
- Turn the crown to set the hour and minute hands.
- Push the crown back to the normal position; the second hand will begin to run.
C) SETTING THE DATE
- Pull the crown out to the 1st position.
- Turn the crown counter-clockwise to set the date.
*Important: If the date is set between approximately 9:00 PM and 1:00 AM, the date may not change correctly on the following day.
- After setting the date, push the crown back to the normal position.
D) SETTING THE DATE OF THE WEEK
- Pull the crown out to the 1st position.
- Turn the crown clockwise to set the day of the week.
*Important: If the day of the week is set between approximately 9:00 PM and 1:00 AM, the day of the week may not change correctly on the following day.
- After setting the day of the week, push the crown back to the normal position.