B719-92 Assembly Instructions and Safety Guide
Brand: Signature Design by Ashley
Model: B719-92
Important Safety Notice
Please read carefully before beginning assembly!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep these instructions for future reference.
- When assembling products that have glass or mirrors, be very careful handling them, as severe injury may result if they break. Never handle large pieces of glass or mirrors by yourself.
- When assembling products with electric cords (lamps, lights, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables, including end tables, coffee tables, and dinner tables, as they are not designed to support a person's weight.
- Where assembly instructions state that assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Disclaimer: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
| Part ID | Quantity | Description |
|---|---|---|
| A | 1 | Main Unit Body |
| B | 4 | Bolt (5/16" x 70mm) |
| C | 4 | Washer (5/16") |
| D | 4 | Nut (5/16") |
| E | 4 | Foot / Leg Component |
| F | 1 | Allen Wrench (4mm) |
| G | 2 | Leveler / Foot Adjustment |
| H | 1 | Small Component (e.g., bracket) |
Assembly Instructions
Important Assembly Notes:
- This unit should be assembled by two or more people.
- Do not tighten any bolts until all bolts have been started.
Step 1: Attach Feet
Attach the feet (Part E) to the bottom of the main unit body (Part A) using the bolts (Part B), washers (Part C), and nuts (Part D). Use the Allen wrench (Part F) to start tightening the bolts.
Diagram Description: Illustration shows attaching four feet (E) to the main unit (A) using bolts (B), washers (C), and nuts (D), with the Allen wrench (F) for tightening. A close-up details the order: bolt, washer, unit, washer, nut.
Step 2: Install Tipping Restraint
The included tipping restraint may reduce, but not eliminate, the risk of furniture tip-over. Follow the specific instructions provided on the plastic bag for proper installation of the tipping restraint mechanism.
Diagram Description: Illustration shows a tipping restraint mechanism (labeled '2') being attached to the furniture unit.
Step 3: Level the Unit
If the unit is placed on an unlevel surface, place a leveler (Part G) underneath one foot until the unit is level. Break off any protruding segments of the leveler after adjustment.
Diagram Description: Illustration shows how to use levelers (G) under the furniture legs if the floor surface is uneven, ensuring the unit sits level.
Support and Replacement Parts
For assistance or to order replacement parts, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
