Important Safety Notices
General Safety: Always use proper tools. Follow assembly steps in order; do not skip any. Check packing materials for loose parts and contact the retailer if any are missing; do not use substitute parts. Periodically check that all connectors (bolts, screws, etc.) are tight. Keep instructions for future reference.
Handling Precautions: Be very careful when handling glass or mirrors, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone. When assembling products with electric cords, ensure the cord is unplugged before assembly and avoid twisting it. Do not stand on lower shelves to assemble upper shelves; use a step ladder. Do not stand on tables (end tables, coffee tables, dinner tables) as they are not designed to support a person's weight. If assembly requires two or more people, do not attempt it alone due to injury risk.
Note: Ashley Furniture Industries, LLC is not liable for damages or injuries resulting from failure to follow assembly instructions, improper assembly, or improper product use.
Note: Your unit's appearance may differ from the illustrations provided.
Parts List
| Identifier | Description | Quantity |
|---|---|---|
| A | Dresser Body | 1 |
| B | Legs | 4 |
| C | Adjustable Leveler | 1 (Type of leveler, used on each leg) |
| D | Drawer Slides | 2 |
| E | Bolts (5/16" x 63mm) | 8 |
| F | Allen Wrench (4mm) | 1 |
| G | Anti-tip Hardware Component | 1 |
Note: Some parts may be specific to certain model numbers (e.g., B594-31 Only).
Assembly and Adjustment Guide
Assembly Requirement: This unit should be assembled by two or more people.
Assembly Tip: Start all bolts before tightening any of them.
Step 1: Attaching Legs
Attach the four legs (B) to the main dresser body (A) using the provided bolts (E) and the Allen wrench (F). Ensure all bolts are started before fully tightening.
Step 2: Installing Drawer Slides
Install the drawer slides (D) onto the inside of the dresser body (A) as indicated in the diagrams.
Step 3: Leveling the Unit
Place the dresser in its desired location. If the surface is unlevel, adjust the levelers (C) on the bottom of each leg (B) until the unit is stable and level. Break off any protruding segments of the levelers after adjustment.
Step 4: Installing Anti-Tip Restraint
⚠️ WARNING: Furniture tip-over can cause serious injury or death. The included tipping restraint may reduce, but not eliminate, the risk of furniture tip-over. Follow the instructions provided on the plastic bag for proper installation of the anti-tip hardware (including component G).
Support and Contact Information
For replacement parts or assistance:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
