Manuals+

Signature Design by Ashley B067-91 Nightstand

Model: B067-91

Manufacturer: Ashley Furniture Industries, LLC

Important Safety Notices

General Safety Precautions:

  • Always use proper tools.
  • Follow the assembly steps in order. Do not skip any steps.
  • Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
  • Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
  • Keep the instructions for future reference.
  • When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
  • When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves – use a step ladder.
  • Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
  • Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.

Manufacturer Disclaimer:

NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.

Appearance Note:

NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.

Additional Safety Notes (Translated from Spanish and French):

  • Always use appropriate tools.
  • Follow assembly steps in order. Do not skip any steps.
  • Check all packaging materials carefully for small parts that may have come loose during shipping. If parts are missing, contact the retailer from which you purchased the product. DO NOT USE SUBSTITUTE PARTS.
  • Periodically check to ensure all connectors (bolts, screws, etc.) are tight.
  • Save instructions for future reference.
  • Some assemblies involve glass or mirrors. Be careful when handling glass or mirrors, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.
  • When assembling products with electric cords (lamps, lights, etc.), always (1) ensure the cord is unplugged before assembly and (2) be careful not to twist the cord during assembly.
  • When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves – use a ladder.
  • Do not stand on tables, including but not limited to, side tables, coffee tables, dining tables, as these tables are not designed to support a person's weight.
  • If assembly instructions state that assembly requires two or more people, do not attempt alone, as there is a risk of injury.
  • Ashley Furniture Industries, LLC is not responsible for damages or injuries that may occur due to failure to follow assembly instructions correctly, proper product assembly, or proper product use.
  • The unit may have a different appearance from what is shown in the illustrations.
  • Carefully check all packaging materials for small parts that may have detached inside the box during shipping. Inventory all parts. If parts are missing, contact your retailer to obtain the missing parts. DO NOT USE SUBSTITUTE PARTS.
  • Keep these instructions for future reference.
  • When assembling products with electric cords (lamps, lights, etc.), always ensure (1) the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
  • When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves – use a step ladder.
  • Do not stand on tables, including but not limited to, end tables, coffee tables, dining tables, as they are not designed to support a person's weight.
  • If assembly instructions mention that installation requires two or more people, do not attempt to assemble yourself, as you risk injury.
  • ASHLEY FURNITURE INDUSTRIES, LLC IS NOT RESPONSIBLE FOR ANY DAMAGES OR INJURIES RESULTING FROM FAILURE TO FOLLOW ASSEMBLY AND USE INSTRUCTIONS CORRECTLY.
  • YOUR FURNITURE MAY LOOK DIFFERENT FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.

Parts List

Hardware

Assembly Instructions

  1. Step 1

    Attach part AA (metal rail) to the top edge of part B (rectangular panel) using 34 screws (AB). Attach part AA to the top edge of part C (tall side panel) using screws (AB). Attach part AA to the top edge of two parts D (base frame) using screws (AB).

  2. Step 2

    Attach part E (rectangular panel) to the side of part C using screws (AB). Attach part K (drawer side panel) to part J (drawer side panel) using screws (R). Attach part F (drawer slide assembly) to the inside of part C using screws (R). Attach part G (drawer slide assembly) to the inside of part E using screws (R).

  3. Step 3

    Connect two side panels (A) to the base panel (B) using 8 screws (P). Insert cam lock nuts (Q) into the pre-drilled holes on part A and part B. Insert cam lock screws (P) into the corresponding holes on part A and part B, then tighten the cam lock nuts (Q) to secure.

  4. Step 4

    Attach part C (tall side panel) to the base assembly (D) using 2 screws (P). Insert cam lock nuts (Q) into the pre-drilled holes on part C and part D. Insert cam lock screws (P) into the corresponding holes on part C and part D, then tighten the cam lock nuts (Q) to secure.

  5. Step 5

    Attach part C (tall side panel) to the base assembly (D) using 2 screws (P). Insert cam lock nuts (Q) into the pre-drilled holes on part C and part D. Insert cam lock screws (P) into the corresponding holes on part C and part D, then tighten the cam lock nuts (Q) to secure.

  6. Step 6

    Connect part B (rectangular panel) to the side panels (C) and base (D) using 4 screws (P). Insert cam lock nuts (Q) into the pre-drilled holes on part B and part C/D. Insert cam lock screws (P) into the corresponding holes on part B and part C/D, then tighten the cam lock nuts (Q) to secure.

  7. Step 7

    Attach part C (top panel) to the assembled frame using 6 screws (AB). Insert cam lock nuts (Q) into the pre-drilled holes on part C and the frame. Insert cam lock screws (AB) into the corresponding holes on part C and the frame, then tighten the cam lock nuts (Q) to secure.

  8. Step 8

    Attach part H (wooden support piece) to the front of drawer slide assemblies F and G using 4 screws (P). Insert cam lock nuts (Q) into the pre-drilled holes on part H and the drawer slide assemblies. Insert cam lock screws (P) into the corresponding holes on part H and the drawer slide assemblies, then tighten the cam lock nuts (Q) to secure.

  9. Step 9

    Attach part E (rectangular panel) to the top of the assembled frame using 2 screws (P). Insert cam lock nuts (Q) into the pre-drilled holes on part E and the frame. Insert cam lock screws (P) into the corresponding holes on part E and the frame, then tighten the cam lock nuts (Q) to secure.

  10. Step 10

    Attach part G (drawer slide assembly) to the inside of the assembled unit. Attach part F (drawer slide assembly) to the inside of the assembled unit. Secure both slide assemblies using 4 screws (P). Insert cam lock nuts (Q) into the pre-drilled holes on the unit and the drawer slide assemblies. Insert cam lock screws (P) into the corresponding holes, then tighten the cam lock nuts (Q) to secure.

  11. Step 11

    Attach the top panel (AA) to the assembled unit using 6 screws (P). Insert cam lock nuts (Q) into the pre-drilled holes on the top panel and the unit. Insert cam lock screws (P) into the corresponding holes, then tighten the cam lock nuts (Q) to secure.

  12. Step 12

    Assemble the drawer: Attach drawer side panels (K) to drawer back panel (N) using cam lock nuts (AC) and cam lock screws (AB). Attach drawer bottom panel (L) into the grooves of the side and back panels. Attach drawer front panel (M) to the drawer side panels (K) using cam lock nuts (AC) and cam lock screws (AB). Slide drawer bottom panel (L) into the groove of the drawer front panel (M).

  13. Step 13

    Attach the drawer slides (F and G) to the drawer box (J, K, L, M, N) using screws (T). Attach the drawer handle (S) to the drawer front panel (M) using screws (T). Insert the assembled drawer into the nightstand frame.

  14. Step 14

    The final assembled nightstand is shown. Ensure all connections are secure.

Models: B067-91 Furniture Dorrinson Nightstand, B067-91, Furniture Dorrinson Nightstand, Dorrinson Nightstand

PDF preview unavailable. Download the PDF instead.

B067-91 i GPL Ghostscript 9.27

Related Documents

Preview Signature Design by Ashley P791-821 Assembly Instructions
This document provides essential safety information and step-by-step assembly instructions for the Signature Design by Ashley P791-821 furniture item. It includes a parts list and diagrams to guide the assembly process.
Preview Signature Design by Ashley D374-15 Assembly Instructions
Comprehensive assembly instructions for the Signature Design by Ashley D374-15 furniture item. Includes safety warnings, a detailed parts list, step-by-step assembly guidance, and contact information for replacement parts.
Preview W901-60 Media Console Assembly Instructions | Signature Design by Ashley
Detailed assembly instructions for the W901-60 media console by Signature Design by Ashley. Includes parts list, step-by-step guidance, and safety information.
Preview Signature Design by Ashley 2200318/2200418 Assembly Instructions
This document provides assembly instructions for the Signature Design by Ashley 2200318/2200418 furniture item. It includes safety warnings, assembly steps, and parts identification in multiple languages.
Preview D631-01 Signature Design by Ashley Chair Assembly Instructions
Complete assembly instructions for the D631-01 chair by Signature Design by Ashley, including safety notices, parts list, and step-by-step guidance.
Preview Signature Design by Ashley D413-425 Assembly Instructions
Detailed assembly instructions and safety guidelines for the Signature Design by Ashley D413-425 furniture set, including tables and chairs. Ensure proper assembly for safe use.
Preview Signature Design by Ashley B719-46 Assembly Instructions
Assembly instructions and safety notices for the Signature Design by Ashley B719-46 furniture item. Includes multilingual warnings and assembly steps.
Preview Signature Design by Ashley D631-124 Chair Assembly Instructions
Assembly instructions for the Signature Design by Ashley D631-124 chair, including safety notices, parts list, and step-by-step assembly guidance.