Scosche MagicMount Elite2: Magnetic Phone Mount Installation Guide

Section A: iPhone 12 or Later (with or without MagSafe Case)

For iPhone 12 or later models:

• With Optional MagSafe Case: If using a case, it must be a MagSafe-compatible case (not included) for the MagicMount Elite2 to function correctly. The MagicRing adapter is not required.
• Without Case: The MagicRing adapter is not required for direct mounting on iPhone 12 or later models without a case.

Ensure the case is a genuine MagSafe case for optimal magnetic connection.

Section B: MagicRing Adapter (for Installation on Non-MagSafe Devices)

For devices that are not MagSafe compatible:

• Use the included template to accurately position the MagicRing adapter on your device or its case.
• Important Note: A case is required for this setup. The manufacturing materials of some devices do not allow adhesives to bond directly to the device surface.

Compatible Devices for MagicRing Adapter:

• Samsung Galaxy Z Flip
• Samsung Galaxy Ultra
• Samsung Galaxy+/Galaxy
• Google Pixel Pro
• Google Pixel 7

Section C: Low-Profile Dash Mount

Installation Instructions:

1. Use the included cleaning wipe to clean the dashboard surface thoroughly before placing the mount.
2. Remove the backing from the bottom of the mount.
3. Place the mount in the desired position on the dashboard.

Caution: The supplied cleaning wipe may cause discoloration on certain plastics, vinyls, and painted surfaces. It is recommended to test the wipe in an inconspicuous area first.

Section D: Optional Mounting Base

Installation Instructions:

1. Use the included cleaning wipe to clean the surface prior to placing the mount.
2. Remove the backing from the bottom of the low-profile mount and place it into the mounting base.
3. Remove the backing from the bottom of the mounting base.
4. Place the mounting base in the desired position.

Caution: The supplied cleaning wipe may cause discoloration on certain plastics, vinyls, and painted surfaces. It is recommended to test the wipe in an inconspicuous area first.

Section E: Adjustable Ball Joint / Replacement Adhesive

⚙️ The mount features an adjustable ball joint for flexible positioning. ? Replacement adhesive is included for future mounting needs.

Section F: Removing Adhesive Mounting Parts

For Dash Mount & MagicRing:

1. Use a thin plastic card to carefully lift the dash mount or MagicRing from the mounting surface.
2. ⬆️ Slowly lift up and remove the mount or MagicRing.