Samsung N150 Plus Back Panel Replacement
This guide will help with the removal of the back panel. This is a crucial step before installing the RAM, screen, keyboard, and the fan.
Written By: patrick Russell
Introduction
This guide is used as a prerequisite guide for the removal of the fan, RAM, screen, and keyboard.
Tools Required:
- Phillips #00 Screwdriver (1)
- iFixit Opening Tools (1)
- Spudger (1)
Step 1: Battery Removal Preparation
Before proceeding with back panel removal, prepare the device:
- Turn off the computer.
- Disconnect the charging cable from the laptop. ⚠️ Failure to unplug the cable could result in electric shock.
- Flip the laptop upside down with the front face down on a flat surface.
Step 2: Unlock Battery Latches
Locate and manipulate the battery release switches:
- Slide the left and right switches to the "unlocked" position.
Step 3: Remove Battery
With the latches disengaged, remove the battery:
- While holding the left and right hand switches in the "unlocked" position, push the battery away from the computer.
Step 4: Remove Back Panel Screws
Prepare to detach the back panel by removing securing screws:
- Using the Phillips #00 screwdriver, unscrew the fourteen 7mm screws until the back panel comes loose.
Step 5: Pry Off Back Panel
Carefully separate the back panel from the laptop chassis:
- Using either the blue plastic opening tools or a spudger tool, wedge one between the back panel and the laptop.
- Apply pressure upwards until the back panel pops off.
⚠️ If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that all the screws are removed before attempting again.
Step 6: Access Internal Components
With the back panel removed, internal components are accessible:
- The computer should now be open with the motherboard exposed and internal components visible. You should now be able to access the Fan and RAM. There are more necessary steps to follow before accessing the screen and keyboard.
Reassembly
To reassemble your device, follow these instructions in reverse order.