KidKraft 65944 Bella Dollhouse Assembly Instructions

Welcome & Warranty Information

Welcome to the KidKraft family. We strive for accuracy in every order, but occasionally errors occur. Our warranty covers every part of your new product for 90 days after purchase. If you are missing parts or find any damage, ordering replacements is easy. Visit parts.KidKraft.com in the US or parts.kidkraft.eu in Europe. For your warranty, assembly instructions, and more, visit KidKraft.com.

Batch Code / Code de lot / Código De Lote / Chargennummer / Numero del lotto: ➡️

Document Revision: REV 12/08/2020

Parts and Hardware Overview

Item Number: 65944

Main Components:

• Part 1
• Part 4
• Part 6
• Part 15
• Part 16
• Part 17
• Part 18
• Part 19
• Part 20
• Part 21
• Part 22
• Part 23
• Part 25
• Part 28
• Part 29
• Part 30
• Part 31
• Part 32
• Part 33
• Part 36
• Part 37
• Part 38
• Part 39
• Part 40
• Accessory: 1815-GD
• Accessory: 910-225
• Accessory: 1664-225
• Accessory: 1313-225
• Accessory: 2008-225
• Accessory: 953-225
• Accessory: 3464-225
• Accessory: 1082-225
• Accessory: 3463-225
• Accessory: 602-WT
• Accessory: 3465-225
• Accessory: 2707-BK
• Accessory: 572-225
• Accessory: 3816-WT
• Accessory: 1086-GD
• Accessory: 1118-BK
• Accessory: 518-GD
• Accessory: 1094-GD
• Accessory: 3495-GD

Hardware List:

• Hardware A: 16 mm Red Screws (x4)
• Hardware B: 16 mm Black Screws (x8)
• Hardware C: 20 mm Pink Screws (x8)
• Hardware D: 20 mm Natural Screws (x2)
• Hardware E: 20 mm Black Screws (x11)
• Hardware F: 45 mm Red Screws (x5)
• Hardware G: 45 mm White Screws (x2)
• Hardware H: 45 mm Black Screws (x4)
• Hardware I: Dowels/Screws (used in steps 6, 9, 11, 17, 20)
• Hardware J: Screws (used in steps 33, 34)
• Hardware K: Screws (used in steps 1, 3, 5, A1)
• Hardware L: Screws (used in steps 7, 19)
• Hardware M: Screws (used in steps 7, 11, 13, 23)
• Hardware N: 30 mm Red Screws (x2)
• Hardware O: 30 mm Pink Screws (x2)
• Hardware P: 30 mm White Screws (x4)
• Hardware Q: 14 mm Screws (x2)
• Hardware R: 11 mm Screws (x2)
• Hardware S: 50 mm Screws (x4)
• Hardware T: 30 mm Screws (x6)
• Hardware MM: Screws (used in step 21)
• Hardware (53): Screws (used in step 30)

Note: All hardware dimensions are approximate.

Assembly Steps

Step 1

Attach Part 1 to Part 4 using Hardware K.

Visual: Part 1 is a long vertical piece. Part 4 is a large flat panel. Hardware K (screws) are shown being inserted with a screwdriver [?].

Step 2

Attach Part 6 to the assembly using Hardware T.

Visual: Part 6 is a rectangular frame structure. Hardware T (screws) are shown being inserted with a screwdriver [?].

Step 3

Secure Part 4 to the assembly using Hardware K.

Visual: Part 4 is being attached to the structure from Step 1, using Hardware K (screws) and a screwdriver [?]. A close-up shows the screw insertion.

Step 4

Attach Part 6 to the main structure using Hardware T.

Visual: Part 6 is being attached to the assembly from Step 2, using Hardware T (screws) and a screwdriver [?].

Step 5

Reinforce the structure by attaching Part 4 using Hardware K.

Visual: Part 4 is being attached again, likely for stability, using Hardware K (screws) and a screwdriver [?].

Step 6

Connect Part 15 and Part 16 to Part 17 using Hardware I and F.

Visual: Part 17 is a long panel. Parts 15 and 16 are smaller panels. Hardware I (dowels/screws) and F (screws) are used, with a screwdriver [?].

Step 7

Attach Part 18 to the assembly using Hardware L and M.

Visual: Part 18 is a panel. Hardware L and M (screws) are used to attach it, with a screwdriver [?].

Step 8

Slide Part 19 into place.

Visual: Part 19 is a large panel being inserted into the structure, indicated by an arrow [➡️].

Step 9

Attach Part 20 to the structure using Hardware G, H, and I.

Visual: Part 20 is a panel. Hardware G, H (screws), and I (dowels/screws) are used with a screwdriver [?].

Step 10

Attach Part 21 to the assembly using Hardware N.

Visual: Part 21 is a component. Hardware N (screws) are used with a screwdriver [?].

Step 11

Secure Part 22 to the assembly using Hardware M and I.

Visual: Part 22 is a component. Hardware M and I (screws) are used with a screwdriver [?].

Step 12

Insert Part 23 into the structure.

Visual: Part 23 is shown being placed into a slot, indicated by a downward arrow [⬇️].

Step 13

Attach components using Hardware M and O.

Visual: Hardware M and O (screws) are used to attach parts, with a screwdriver [?].

Step 14

Attach Part 3465-225 using Hardware P.

Visual: Part 3465-225 is a component. Hardware P (screws) are used with a screwdriver [?].

Step 15

Connect components using Hardware Q and R.

Visual: Hardware Q and R (screws) are used to connect parts, with a screwdriver [?].

Step 16

Attach Part 25 to Part 26 and Part 27 using Hardware S.

Visual: Parts 25, 26, 27 are components. Hardware S (screws) are used with a screwdriver [?].

Step 17

Attach Part 28 to the assembly using Hardware I and F.

Visual: Part 28 is a panel. Hardware I (dowels/screws) and F (screws) are used with a screwdriver [?].

Step 18

Slide Part 29 into place.

Visual: Part 29 is a large panel being inserted into the structure, indicated by an arrow [➡️].

Step 19

Attach components using Hardware L and O.

Visual: Hardware L and O (screws) are used to attach parts, with a screwdriver [?].

Step 20

Secure Part 30 using Hardware I, F, and S.

Visual: Part 30 is a panel. Hardware I, F, and S (screws) are used with a screwdriver [?].

Step 21

Attach Part 31 using Hardware MM.

Visual: Part 31 is a component. Hardware MM (screws) are used with a screwdriver [?].

Step 22

Assemble Parts 32 and 33.

Visual: Part 32 is shown being placed onto Part 33, indicated by a downward arrow [⬇️].

Step 23

Attach Part 33 to the main structure using Hardware M.

Visual: Part 33 is being attached to the assembly using Hardware M (screws) and a screwdriver [?].

Step 24

Attach Parts 34 using Hardware A.

Visual: Parts 34 are components. Hardware A (screws) are used with a screwdriver [?].

Step 25

Attach Parts 36 and 37 using Hardware B.

Visual: Parts 36 and 37 are components. Hardware B (screws) are used with a screwdriver [?].

Step 26

Attach Part 38 to Part 39 using Hardware C.

Visual: Part 38 is a roof piece. Part 39 is a wall panel. Hardware C (screws) are used with a screwdriver [?].

Step 27

Attach Parts 37, 39, and 40 using Hardware B.

Visual: Parts 37, 39, and 40 are components. Hardware B (screws) are used with a screwdriver [?].

Step 28

Attach Parts 38 and 40 to Part 34 using Hardware D and B.

Visual: Parts 38 and 40 are components. Part 34 is a panel. Hardware D and B (screws) are used with a screwdriver [?].

Step 29

Attach components using Part 3464-225 and Hardware E.

Visual: Part 3464-225 is a component. Hardware E (screws) are used with a screwdriver [?].

Step 30

Secure components using Part 3464-225 and Hardware (53).

Visual: Part 3464-225 is a component. Hardware (53) (screws) are used with a screwdriver [?]. A close-up shows the connection point.

Step 31

Attach components using Part 3464-225 and Hardware E.

Visual: Part 3464-225 is a component. Hardware E (screws) are used with a screwdriver [?].

Step 32

Install Part 602-WT.

Visual: Part 602-WT is a staircase component. It is shown being installed in multiple locations, indicated by callouts and the part number.

Step 33

Assemble Parts 3495-GD-a, 3495-GD-b, 3495-GD-c, and 3495-GD-d using Hardware J.

Visual: These parts appear to be decorative elements or furniture pieces. Hardware J (screws) are used with a screwdriver [?]. Arrows indicate assembly direction.

Step 34

Attach Parts 3495-GD-c and 3495-GD-d using Hardware J.

Visual: Parts 3495-GD-c and 3495-GD-d are being attached to the structure using Hardware J (screws) and a screwdriver [?].

Step 35

Assemble Parts 572-225 and 518-GD.

Visual: Part 572-225 is a bathtub. Part 518-GD is a base or frame. They are shown being put together.

Step 36

Attach Part 2707-BK-a.

Visual: Part 2707-BK-a is a piano or bench component. It is shown being attached to the structure.

Step A1

Prepare the lamp (Part 1664-225) by inserting screws.

Visual: The lamp base (Part 1664-225) is shown. Screws (Hardware K) are being inserted with a screwdriver [?].

Step A2

Install batteries into the lamp (Part 1664-225).

Visual: The lamp base is shown. A battery compartment is open. LR44/AG13 batteries are shown being inserted with correct polarity [➕]. A timer symbol [⏱️] is also present.

Step A3

Secure the lamp cover and test.

Visual: The lamp cover is being attached. LR44/AG13 batteries are shown again. A lightbulb symbol [?] indicates testing.

Step B1

Prepare the toilet (Part 953-225) by inserting screws.

Visual: The toilet component (Part 953-225) is shown. Screws are being inserted with a screwdriver [?].

Step B2

Install batteries into the toilet (Part 953-225).

Visual: The toilet component is shown. A battery compartment is open. LR44/AG13 batteries are shown being inserted with correct polarity [➕]. A sound symbol [?] is present.

Step B3

Secure the toilet cover and test.

Visual: The toilet cover is being attached. LR44/AG13 batteries are shown again. A sound symbol [?] indicates testing.

Step C1

Prepare the music box/piano (Part 2707-BK) by inserting screws.

Visual: The music box/piano component (Part 2707-BK) is shown. Screws are being inserted with a screwdriver [?].

Step C2

Install batteries into the music box/piano (Part 2707-BK).

Visual: The music box/piano component is shown. A battery compartment is open. LR44/AG13 batteries are shown being inserted with correct polarity [➕]. A sound symbol [?] is present.

Step C3

Secure the music box/piano cover and test.

Visual: The music box/piano cover is being attached. LR44/AG13 batteries are shown again. A sound symbol [?] indicates testing.