KidKraft Dollhouse Assembly Instructions

Electrical Specifications:

• Floor Lamp: Uses 3 LR44/AG13 type batteries (1.5V DC each, total 4.5V DC) - Button Type
• Piano: Uses 3 LR44/AG13 type batteries (1.5V DC each, total 4.5V DC) - Button Type
• Toilet: Uses 3 LR44/AG13 type batteries (1.5V DC each, total 4.5V DC) - Button Type

Batteries included.

Use similar batteries, preferably alkaline. Do not use new batteries with used ones. Do not mix alkaline with rechargeable batteries. Insert batteries correctly, verifying the poles are correct according to the diagram marked on the product. When not using the product, remove the batteries. Do not remove batteries without turning off the product. Do not wet the product.

Parts and Hardware

A detailed diagram shows all the parts and hardware required for assembly. Parts are numbered from 1 to 76, and hardware is labeled with letters (A, B, C, D, E, F).

Hardware List:

• A: x42 (31 mm)
• B: x24 (11 mm)
• C: x37 (16 mm)
• D: x4 (16 mm)
• E: x2
• F: x8 (12 mm)

Assembly Steps:

The assembly is broken down into numbered steps, each with diagrams illustrating the process. Key steps include:

• Step 1 & 2: Attaching part 1 to part 2 using hardware A.
• Step 3: Connecting parts 4 and 5 with hardware B, and attaching part 6.
• Step 4: Assembling the main structure by connecting parts 2, 3, 4, and 5 using hardware A.
• Step 5: Further assembly of the main structure with parts 2, 3, and 4, using hardware A.
• Step 6: Attaching part 7 to the structure using hardware A.
• Step 7: Sliding part 8 into place.
• Step 8: Attaching part 9 to the structure using hardware C.
• Step 9: Securing part 8 with hardware C.
• Step 10: Attaching railings (parts 11 and 12) to posts (part 10). Diagrams show correct and incorrect assembly.
• Step 11: Continuing railing assembly.
• Step 12: Completing railing assembly.
• Step 13: Attaching internal supports using hardware C.
• Step 14: Attaching part 14 to part 2 using hardware A and C.
• Step 15: Connecting parts 2 and 14 with hardware A and C.
• Step 16: Inserting posts (part 10) and panels (part 15) into the main structure using hardware A and C.
• Step 17: Attaching panels (part 15) and part 9 using hardware C.
• Step 18: Attaching panels (parts 16 and 17) using hardware E.
• Step 19: Attaching part 18 to the structure using hardware A.
• Step 20: Attaching part 18 to the structure using hardware A.
• Step 21: Assembling a support structure with base (part 19) and posts (parts 20, 21, 22, 23) using hardware C.
• Step 22: Attaching panel (part 25) to the assembled posts.
• Step 23: Attaching base (part 19) to the assembled posts and panels using hardware C.
• Step 24: Attaching a vertical panel (part 26) and a support structure (part D) using hardware D.
• Step 25: Attaching a panel (part 25) to the main structure using hardware A.
• Step 26: Attaching a panel (part 25) to the main structure using hardware A.
• Step 27: Attaching part 33 and 34 using hardware A.
• Step 28: Attaching part 35 to part 36.
• Step 29: Attaching parts 35 to the structure using hardware A.
• Step 30: Attaching parts 37 and 38 using hardware A.
• Step 31: Attaching parts 33 and 34 using hardware A.
• Step 32: Connecting part 36 to the structure using parts 35.
• Step 33: Attaching parts 35 to the structure using hardware A.
• Step 34: Attaching parts 37 and 38 using hardware A.
• Step 35: Attaching parts 39 using hardware C.
• Step 36: Attaching roof supports (parts 46, 46a, 46b) using hardware F.
• Step 37: Attaching roof supports and panels using hardware B and C.
• Step 38: Attaching roof supports and panels using hardware B and C.
• Step 39: Attaching roof supports and panels using hardware B and C.
• Step 40 (x2): Attaching roof components.
• Step 41: Attaching roof components using hardware F.
• Step 42: Attaching roof components.
• Step 43: Attaching roof components.
• Step 44: Attaching roof components.
• Step 45: Attaching a bell (part 75) and a ceiling fan (part 70) using hardware C.
• Step A1-A3: Battery installation for the floor lamp (part 50).
• Step B1-B3: Battery installation for the toilet (part 64) and piano (part 51).

Important Information and Care

All KidKraft wooden items are handcrafted and may have slight imperfections, which are not manufacturing defects.

Warranty Information:

• United States: Warranted against manufacturing defects for 90 days from the date of purchase.
• Outside United States: Warranty terms may vary by nation. Contact KidKraft customer service for details.
• Australia: Goods come with guarantees that cannot be excluded under the Australian Consumer Law.

Warranty Exclusions: Does not cover damage from permanent markers, non-water-based paints, crayons, washable markers, or other implements that damage the product. Misuse, improper assembly, failure to follow warnings, or lack of supervision will invalidate the warranty.

Cleaning Instructions: Clean surfaces with a slightly damp cloth and mild dish soap. Avoid alcohol or ammonia-based cleaners. Furniture polish can also be used.

Usage and Maintenance:

• Adult assembly required. Keep unassembled parts away from children.
• Use on level surfaces only.
• Check assembly and tighten hardware regularly.
• Parental supervision is required. This item is intended for children of a specific age or above. Ensure children younger than the intended age range do not interact with the item.
• Use this item on the floor. Do not allow children to climb on or around it.
• Wash all play food/drink items thoroughly before use. Not dishwasher, oven, or microwave safe.

Contact Us

U.S. / MEXICO:

KidKraft
4630 Olin Road
Dallas, Texas 75244
www.kidkraft.com
customerservice@kidkraft.com
1.800.933.0771
972.385.0100

If you have any issues with your item or need assistance, please contact KidKraft customer service. Provide the item number, description of the problem, part number, and batch code.