Yeelight Smart Dual Control Module
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
Contact Information:
- Website: www.alza.co.uk/kontakt
- Phone: +44 (0)203 514 4411
- Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
Product Description
The Yeelight Dual Control Module is a smart product used to control the power supply of equipment, such as lights and household appliances. It features a built-in WiFi + Bluetooth dual module, eliminating the need for a gateway. The module can also be externally connected to a normal wall switch or a Yeelight Flex switch to enable remote control anytime, anywhere.
Module Diagram: The module is a rectangular device with an antenna wire extending from one end. It features an indicator/button on the top, a terminal screw block, and a jumper wire. The terminal block has labeled connection points: N (Neutral), L (Input Live), L1 (Load Live), L2 (Load Live), K2, K1, S2, S1.
Button Functionalities:
- Press for 5s: Reset
- Tap: L1&L2 ON/OFF
Setup Instructions
⚠️ Warning! Please ensure the master power switch is turned off before installation to avoid electric shock!
Connect to normal wall switch:
1. Use a screwdriver to loosen the terminal screws of the device. Connect the neutral line to the 'N' hole and the input live line to the 'L' hole. Connect the load (e.g., a lamp) live wire into the 'L1' and 'L2' holes.
2. Connect the original COM terminal of the normal wall switch to the input live wire 'L', and connect the control wires to 'S1' and 'S2' respectively.
3. After proper wiring, tighten the terminal screws of the device.
Important: Do not remove the original jumper wire between K1 and K2!
Wiring Diagram Description: The diagram shows the module connected to a normal wall switch. The module's 'N' terminal connects to the neutral line. The module's 'L' terminal connects to the input live line. The load (lamp) live wire connects to the module's 'L1' and 'L2' terminals. The normal wall switch's COM terminal connects to the input live line 'L', and its control terminals connect to the module's 'S1' and 'S2' terminals.
Connect to Yeelight Flex switch:
1. Remove the jumper wire between K1 and K2 with a screwdriver. Connect the neutral line to the 'N' hole, and connect the load (i.e., a lamp) live line to the 'L1' and 'L2' holes.
2. Connect the input live line to the Yeelight Flex switch and connect the two control wires of the Flex switch to the 'K1' and 'K2' terminals of the module respectively.
3. After proper wiring, tighten the terminal screws of the device.
Wiring Diagram Description: The diagram shows the module connected to a Yeelight Flex switch. The module's 'N' terminal connects to the neutral line. The load live wire connects to the module's 'L1' and 'L2' terminals. The input live line connects to the Yeelight Flex switch. The two control wires from the Flex switch connect to the module's 'K1' and 'K2' terminals.
Wireless control (without any external switch):
1. Use a screwdriver to loosen the terminal screws of the device. Connect the neutral line to the 'N' hole, and the load (i.e., a lamp) live line to the 'L1' and 'L2' holes. Connect the input live line to the 'L' hole.
2. After proper wiring, tighten the terminal screws of the device.
Important: Do not remove the original jumper wire between K1 and K2!
Wiring Diagram Description: The diagram shows the module connected directly to power and load, without an external switch. The module's 'N' terminal connects to the neutral line. The load live wire connects to the module's 'L1' and 'L2' terminals. The input live line connects to the module's 'L' terminal.
Intelligent Control
Download the App: Search for the Yeelight app in your device's app store or scan the QR code provided to download and install the Yeelight application.
Add your device: Open the Yeelight App, tap the '+' icon in the upper right corner, and follow the on-screen prompts to add your device.
- Please ensure you have accessible Wi-Fi during connection. This device does not support 5GHz Wi-Fi.
- This device is also compatible with the Mi Home App.
How to Reset
Method A: Press the button for 5 seconds. The module is successfully reset when the red indicator flashes quickly.
Method B: Switch any connected external wall switch on and off 5 times (2 seconds each time). The module is successfully reset when the red indicator flashes quickly and the device powers off and on once.
Parameters
| Parameter | Value |
|---|---|
| Model | YLAI002 |
| Size | 49.5*46.2*24.5mm |
| Rated Input | 220-240V ~ 50/60Hz |
| Wireless Connection | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 |
| Supports System | Android 4.4 or iOS 9.0 and above |
| Load Range (L1,L2) | Resistive load-MAX 10A (Total) Capacitive load-200W / channel |
Safety Precautions
- The installation involves strong electricity and high voltage. Please ask qualified electricians or agencies to install the device in accordance with electrical regulations and this user manual.
- This product is for indoor use only. Do not use it in a humid environment or outdoors. Do not spill water or other liquids on this product.
- Do not place this product near a heat source. Ensure proper air convection and ventilation.
- Do not repair this product yourself. Please contact an authorized agency for maintenance.
- This product must be protected by an external circuit breaker during installation.
Warranty Conditions
A new product purchased from the Alza.cz sales network is guaranteed for 2 years. If repair or other services are needed during the warranty period, contact the product seller directly. You must provide the original proof of purchase with the date of purchase.
The following are considered conflicts with the warranty conditions, for which a claim may not be recognized:
- Using the product for a purpose other than intended, or failing to follow maintenance, operation, and service instructions.
- Damage caused by natural disaster, intervention by an unauthorized person, or mechanical damage due to buyer's fault (e.g., during transport, cleaning with inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (e.g., batteries, etc.).
- Exposure to adverse external influences such as sunlight, other radiation, electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge (including lightning), faulty supply or input voltage and incorrect polarity, chemical processes, or used power supplies.
- Modifications, alterations, or adaptations made by anyone to change or extend the product's functions compared to the purchased design, or the use of non-original components.
EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the Yeelight Smart Dual Control Module complies with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.
CE mark present.
WEEE
[WEEE symbol: crossed-out wheeled bin] This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.
