Autel MaxiIM IM508S Quick Reference Guide

Email: sales@autel.com | Web: www.autel.com

MaxiIM IM508S Components

The Autel MaxiIM IM508S is depicted with its front, back, and side views. Key components are numbered and described: 1. 7.0" LCD Capacitive Touchscreen, 2. Ambient Light Sensor (detects ambient brightness), 3. Power LED (indicates battery level & charging or system status), 4. Vehicle Communication LED (flashes green when communicating with the vehicle's system), 5. Collapsible Stand (for hands-free viewing), 6. Heat Sink, 7. Built-in Battery, 8. Mini USB Port, 9. Micro SD Card Slot (holds micro SD card), 10. DB15-Pin Port (connects the main cable).

1. 7.0" LCD Capacitive Touchscreen
2. Ambient Light Sensor: Detects ambient brightness.
3. Power LED: Indicates battery level & charging or system status.
4. Vehicle Communication LED: Flashes green when the tablet is communicating/linking with the vehicle's system.
5. Collapsible Stand: Extends from the back to allow hands-free viewing of the tablet.
6. Heat Sink
7. Built-in Battery
8. Mini USB Port
9. Micro SD Card Slot: Holds the micro SD card.
10. DB15-Pin Port: Connects the main cable.

XP200 Components

The Autel XP200 is shown from multiple angles. Key components are numbered and described: 11. USB Port, 12. Lock/Power Button (turns device on/off or locks screen), 13. Vehicle Key Chip Slot (holds vehicle key chip), 14. Vehicle Key Slot (holds vehicle key), 15. Status LED Light (indicates operating status), 16. DB15-Pin Port (connects EEPROM Adapter and Cable), 17. Mini USB Port (provides data communication and power).

11. USB Port
12. Lock/Power Button: Turns the device on & off with a long press, or locks the screen with a short press.
13. Vehicle Key Chip Slot: Holds the vehicle key chip.
14. Vehicle Key Slot: Holds the vehicle key.
15. Status LED Light: Indicates the current operating status.
16. DB15-Pin Port: Connects EEPROM Adapter and EEPROM Clamp Integrated MC9S12 Cable.
17. Mini USB Port: Provides data communication and power supply.

LED Descriptions

IM508S LED Description

LED	Color	Description
Power LED	Green	Flashes green when charging.
Power LED	Red	Flashes red when an error has occurred.

XP200 LED Description

LED	Color	Description
Status LED	Red	Lights red when the firmware is upgrading or an error has occurred. Lights red briefly when the device is powered on and performing self-check.
Status LED	Green	Flashes green when communicating via USB cable. Lights green when the device is ready for use.

Getting Started

IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully, paying extra attention to the safety warnings and precautions. Failure to use this product properly may cause damage and/or personal injury and will void the product warranty.

Step 1: Website and Registration

Step 1 involves scanning a QR code displayed on the page. This QR code links to the Autel website (pro.autel.com), where users can create an Autel ID and register their product.

Scan the QR code to visit pro.autel.com.
Create an Autel ID and register the product with its serial number and password.

Step 2: Power On the Tool

Step 2 shows the MaxiIM IM508S tool connected to a power source. Users should ensure the tool is charged or connected, then press and hold the Lock/Power button [power symbol] to turn it on. The main cable's female adapter must be connected to the tool and its captive screws tightened.

Ensure your tool is sufficiently charged or connected to the power source.
Press and hold the Lock/Power button [power symbol] to turn on the key programming tool.
Connect the female adapter of the main cable to the key programming tool and tighten the captive screws.

Step 3: Connect to Vehicle

Step 3 illustrates connecting the tool to the vehicle. The 16-pin male adapter of the main cable connects to the vehicle's DLC port, typically found under the dashboard. The tool is then ready for use.

Connect the 16-pin male adapter of the main cable to the vehicle's DLC, which is generally located under the vehicle dashboard.
Your key programming tool is now ready for use.

Step 4: Software Update

Ensure the key programming tool is connected to the Internet.
Tap 'Update' on the Home screen to view and install available updates.

Immobilizer Function

This function requires a connection among the vehicle, the IM508S key programming tool, and the XP200.

Step 1: Connect Vehicle and Tool

Step 1 for the Immobilizer Function shows the vehicle and the MaxiIM IM508S tool connected via the supplied main cable.

Connect the vehicle and the key programming tool with the supplied main cable.

Step 2: Connect XP200 and Select Function

Step 2 shows the MaxiIM IM508S tool connected to the XP200 using a USB cable. Users then select 'Immobilizer' on the Home screen and follow the on-screen instructions.

Connect the key programming tool and the XP200 with the supplied USB cable.
Select 'Immobilizer' on the Home screen and follow the on-screen instructions to continue.

Programming Function

This function requires connection between the MaxiIM IM508S key programming tool and the XP200.

	Autel MaxiCheck MX808S/MaxiPRO MP808S Quick Reference Guide Quick reference guide for Autel's MaxiCheck MX808S, MaxiPRO MP808S, MaxiIM IM508S, MaxiDAS DS808S, and MaxiCOM MK808S automotive diagnostic tools. Covers getting started, software updates, and wireless printing.
	Autel MaxiIM IM608 Pro II Quick Reference Guide Comprehensive quick reference guide for the Autel MaxiIM IM608 Pro II automotive diagnostic tool, covering device components, safety precautions, getting started, and key functions like key programming and wireless printing.
	Autel MaxiIM KM100: Professional Auto Key Programming Tool Discover the Autel MaxiIM KM100, a professional intelligent tool for auto key generation, transponder programming, and IMMO learning. Features include OE-level quality, 5.5-inch screen, and extensive vehicle compatibility.
	Autel MaxiIM KM100 Quick Reference Guide A quick reference guide for the Autel MaxiIM KM100 Professional Key Tool, covering device features, VCI device information, LED descriptions, and regulatory compliance statements.
	Autel IM608 and IM508 Key Programming Guide A comprehensive guide to using Autel IM608 and IM508 key programming tools for various car makes and models, featuring detailed instructions and video links for each procedure.
	AUTEL G-BOX3 Quick Reference Guide A quick reference guide for the AUTEL G-BOX3, detailing its product description, connection procedures for Mercedes-Benz key programming (all keys lost, desktop operation, bench operation), packing list, and warranty information.
	Autel IM Software Update KM100 V2.10 and BMW V1.70 Details of the latest Autel IM software updates for the KM100, including new vehicle support and optimizations for IMMO type 8A vehicles. Also includes updates for BMW F chassis with BDC module.
	Autel MaxiCOM Ultra Lite User Manual - Advanced Automotive Diagnostics Comprehensive user manual for the Autel MaxiCOM Ultra Lite diagnostic tablet, covering setup, diagnostics, service functions, maintenance, and support. Learn to use Autel's advanced automotive diagnostic tools.