Autel MaxiIM KM100 Quick Reference Guide

Autel MaxiIM KM100 Device Features

The KM100 device includes the following components:

• 1. 5.5-inch Touchscreen: For user interaction and display.
• 2. Ambient Light Sensor: Detects and adjusts screen brightness based on ambient light.
• 3. Status LED: Indicates the operational status of the device.
• 4. Low Frequency Detection Collector: Collects low-frequency data.
• 5. Transponder Slot: Used for reading and writing transponders.
• 6. Vehicle Key Slot: Reads key information and measures remote frequency.
• 7. Rear Camera: For capturing images or scanning.
• 8. Camera Flash: Provides illumination for the rear camera.
• 9. Lock/Power Button: Press and hold to turn the tool on/off, or tap to lock the screen.
• 10. Type-C USB Port: For charging and data transfer.
• 11. SD Card Slot: For expandable storage.
• 12. Mini USB Port: For data transfer or connection.
• 13. Microphone: For audio input.

VCI (Vehicle Communication Interface) Device - MaxiVCI V200

The MaxiVCI V200 is the vehicle communication interface for the KM100.

• 1. Flashlight Power Button: Controls the integrated flashlight.
• 2. Power LED: Indicates the power status of the VCI.
• 3. Vehicle/Connection LED: Shows the connection status with the vehicle and host device.
• 4. Vehicle Data Connector (16-pin): Connects to the vehicle's DLC (Data Link Connector).
• 5. USB Port: For firmware updates or wired connection.

VCI LED Description

Getting Started

1. Power On: Press and hold the Lock/Power button on the KM100 to power on the tool.
2. Visit Website: Scan the QR code provided to visit the Autel website (www.autel.com). Create an Autel ID and register the tool using its serial number and password.
3. Connect to Vehicle: Insert the vehicle's DLC into the MaxiVCI V200's Vehicle Data Connector. The DLC is typically located under the vehicle's dashboard.
4. Establish Communication: Turn the vehicle ignition to the ON position. Pair the KM100 with the MaxiVCI V200 via Bluetooth or connect using the supplied USB cable to establish a communication link.
5. Update Software: Ensure the KM100 and MaxiVCI V200 are updated with the latest software and firmware versions. Connect the KM100 to the internet and ensure it is fully charged or connected to a power adapter for updates.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information and Statement

This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of the USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: MaxiIM KM100, FCC ID: WQ8IMKM100 has also been tested against this SAR limit. This device was tested for typical body-worn operations with the edge of the device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the edge of the device.

ISED Statement (Canada)

English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectriquesubi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This radio transmitter (ISED certification number: 10826A-KM100) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Caution (RF Exposure)

English: (i) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

French: (i) les dispositifs fonctionnant dans la bande de 5150 à 5250MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

Specific Absorption Rate (SAR) information (Canada)

This device meets the government’s requirements for Canada radiation exposure limits set forth for an uncontrolled environment. This device was tested for typical body-worn operations with the back of the device kept 0mm from the body. To maintain compliance with ISED RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with ISED RF exposure requirements, and should be avoided.

CE Statement

Hereby, Autel Intelligent Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.autel.com

The frequency and the maximum transmitted power in EU are listed below:

Country Codes: BE, EL, LT, PT, BG, ES, LU, RO, CZ, HU, SI, DK, HR, MT, SK, DE, IT, EE, CY, AT, SE, IE, LV, PL, UK, FR, NL, FI

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

This equipment should be installed and operated with minimum distance 0mm between the radiator and your body.