Introduction & Overview
Welcome to your Philips TAT1109 True Wireless Headphones. Enjoy hands-free calls and wireless music.
For support and registration: www.philips.com/support
Key Features:
- Hands-free calls
- Wireless music control
Box Contents:
- Philips TAT1109 Headphones
- Charging Case
- 3 sizes of ear tips
- USB-C charging cable
- Quick start guide, Safety & Warranty information
Components:
- 1. MFT Button: Touch control for various functions.
- 2. LED Indicator: Shows battery status and charging status.
- 3. USB-C Charging Port: For charging the case.
Getting Started
Charging the Batteries:
Charge the headphones and case for optimal performance. Use the provided USB-C cable. A full charge typically takes 2 hours.
Wearing the Earbuds:
Select the appropriate silicone ear tips for a secure and comfortable fit. Insert the earbuds into your ears and rotate gently until they are snug.
The charging case can recharge the earbuds up to 3 times.
Pairing Your Headphones
First-Time Pairing:
Ensure earbuds are charged. Remove them from the charging case; they will automatically enter pairing mode.
On your Bluetooth device, enable Bluetooth and select "Philips TAT1109". If prompted, enter "0000" as the password (for older Bluetooth versions).
Single Earbud Use:
Remove either the left or right earbud from the case for mono audio. The earbud will power on and connect automatically.
Pairing with Another Device:
To pair with a new device, press and hold the touch controls on both earbuds for 5 seconds simultaneously. Then, search for the device on your new Bluetooth device.
Note: The headphones store up to 4 paired devices. Pairing a fifth device will replace the first one.
Using Your Earbuds
Connecting to Bluetooth:
The headphones automatically connect to the last paired device. If unavailable, they will search for the previously connected device.
Music and Call Management (MFT Controls):
- Play/Pause Music: Double-tap the right earbud.
- Next Track: Triple-tap the right earbud.
- Previous Track: Triple-tap the left earbud.
- Volume Up: Single tap the right earbud, then press and hold.
- Volume Down: Single tap the left earbud, then press and hold.
- Answer/End Call: Single tap either earbud.
- Reject Call: Double-tap either earbud.
Voice Assistant:
Activate Siri or Google Assistant by double-tapping the left earbud.
Game Mode:
Activate low-latency game mode by double-tapping the left earbud.
LED Indicator Status
Charging Case:
- Low Battery: Orange LED blinks.
- Battery Charged: White LED solid for 2 seconds.
Earbuds:
- Low Battery: Orange LED blinks slowly 4 times.
- Battery Charged: White LED solid for 2 seconds.
Resetting Your Earbuds
If you experience pairing or connection issues, reset the earbuds:
- On your Bluetooth device, go to Bluetooth settings and remove/forget "Philips TAT1109".
- Turn off Bluetooth on your device.
- Take earbuds out of the case. Press and hold the MFT button on one earbud for 5 seconds.
- Place the earbuds back into the charging case.
- Follow the pairing steps again.
Technical Specifications
- Music Playback Time: Up to 24 hours (with charging case).
- Charging Time: Approx. 2 hours.
- Battery: 40mAh (earbuds), 400mAh (charging case).
- Bluetooth Version: 5.4.
- Supported Bluetooth Profiles: HFP, A2DP, AVRCP.
- Supported Codecs: SBC.
- Frequency Range: 2.402-2.480 GHz.
- Operating Range: Up to 10 meters.
- Charging Port: USB-C.
Safety and Compliance
Hearing Safety:
Listen at safe volume levels and avoid prolonged use at high volumes to prevent hearing damage.
General Safety:
Do not expose to heat, water, or impact. Clean with a soft, damp cloth. Avoid harsh chemicals.
Battery Safety:
Contains a built-in rechargeable battery. Do not incinerate, crush, or expose to extreme heat. Dispose of according to local regulations.
EMF Compliance:
This product complies with applicable electromagnetic field exposure limits.
FCC Compliance:
This device complies with Part 15 of the FCC Rules.
Trademarks
Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. Siri is a trademark of Apple Inc. Google Play and Google are trademarks of Google LLC.
Frequently Asked Questions (FAQ)
No Bluetooth Connection:
Ensure earbuds are charged and Bluetooth is enabled on your device. Remove "Philips TAT1109" from your device's Bluetooth list and re-pair.
Poor Sound Quality:
Ensure your device is within range and there are no obstructions. Charge the earbuds.
Earbuds Not Found for Pairing:
Charge the earbuds. Ensure they are not connected to another device. Reset the earbuds and try pairing again.
Care and Maintenance
Cleaning:
Regularly clean the earbuds and charging case with a soft, slightly damp cloth. Ensure they are dry before use or charging. Avoid abrasive cleaners.
Battery Care:
If not used for an extended period, charge the battery at least once every three months to maintain its capacity.
Disposal Information
This symbol means the product should not be disposed of with normal household waste. Follow local regulations for the disposal of electronic products and batteries to protect the environment and human health.
Legal Information
© 2024 MMD Hong Kong Holding Limited. All rights reserved. Philips and the Philips Shield Emblem are trademarks of Koninklijke Philips N.V. and are used under license.
