FITUEYES

What's in the Box

Parts:

• Part 1: Base Plate
• Part 2: Vertical Pole
• Part 3: Mounting Bracket
• Part 4a: TV Mounting Plate (Left/Right Arm)
• Part 4b: TV Mounting Plate (Left/Right Arm)
• Part 5: Connector Piece
• Part 6: Adapter/Bracket
• Part 7: Screw/Bolt
• Part 8: Base Plate

Hardware & Tools:

Easy to Install

Step 1: Assemble Base

Attach Part 7 to Part 8 using hardware A (x4).

Step 2: Prepare Pole Assembly

Attach Part 5 to Part 6.

Step 3: Connect Pole to Base

Connect the Vertical Pole (Part 2) to the Base Plate (Part 8). Ensure correct orientation by following the 'Reverse' instruction and directional arrow.

Step 4: Attach Mounting Bracket to Pole

Attach the Mounting Bracket (Part 3) to the assembled pole unit.

Step 5: Secure Pole Assembly

Insert Part 5 into Part 6 and secure with hardware B (x2).

Step 6: Attach TV Mount Arms

Attach TV Mount Arms (Parts 4a and 4b) to the pole assembly using hardware M-H (x4) and M-J (x8). A green checkmark (✔️) indicates correct assembly, while a red cross (❌) indicates incorrect assembly.

Step 7: Mount TV to Bracket

Select appropriate screws from hardware M-A to M-G and attach Part 4 (the TV mounting plate assembly) to the four screw holes on the back of your TV.

Method A1 (for flat TV backs): Use screws directly without washers.

Method A2 (for uneven TV backs): Use screws with washers (M-H to M-J). Thick washers can be superimposed as needed to accommodate uneven surfaces.

Step 8: Disassemble/Prepare Mount Arms

This step shows the disassembly or preparation of parts 4a/4b, potentially for easier attachment to the TV or pole.

Step 9: Attach TV to Pole Assembly

Mount the TV with the attached bracket onto the main pole assembly.

Step 10: Secure TV to Pole

Complete the attachment of the TV to the pole assembly in two steps. A 'Magnet' feature is indicated.

Step 11: Final Assembly

The TV is now fully mounted on the FITUEYES FT48 Floor TV Stand.