Kogan KAMN29UHWLA 29" Curved Ultrawide 100Hz FreeSync Gaming Monitor

Safety & Warnings

• Read all instructions before using the appliance and retain for reference.
• Unplug the monitor before cleaning it.
• Use a clean, slightly-dampened cloth to wipe the main monitor body.
• To clean the screen: turn it off, unplug it, wait for it to cool completely, then wipe with a dry microfibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids, or other harsh cleaners.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces, or other sources of heat, as well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord, or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.

The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc., in the United States and other countries.

Components

Included in the package:

• Monitor
• Stand stem
• Stand base
• Stand trim cover
• M4x12mm Screws (x3)
• VESA screws (x4)
• Power adapter
• DP cable
• User guide

Illustration: A diagram showing the monitor, stand components (stem, base, trim cover), screws (M4x12mm and VESA), power adapter, DP cable, and user guide.

Overview

Controls

The monitor features several control buttons located on the rear or underside:

• 1. Menu button (M): Press to display the OSD menu or enter sub-menus.
• 2. Down button (∇): Press to move down in the menus.
• 3. Up button (Δ): Press to move up in the menus.
• 4. Exit button (E): Press to exit menus.
• 5. Power button (⏻): Press to turn the monitor on/off.
• 6. LED indicator: Changes colors to indicate status.

Illustration: A diagram showing the monitor's rear with numbered control buttons.

Ports

The monitor includes the following ports:

• 7. Audio out (3.5mm jack): For connecting headphones or external speakers.
• 8. HDMI input (x2): For connecting video and audio sources via HDMI.
• 9. DisplayPort: For connecting video and audio sources via DisplayPort.
• 10. Power input: For connecting the power adapter.

Illustration: A diagram showing the monitor's rear with numbered input/output ports.

Assembly

Monitor Stand Assembly

Note: Keep the foam underneath the monitor before attaching the stand.

1. Open the package, remove the monitor with the foam still attached, and gently place it on a soft, clean surface.
2. Attach the stand stem to the stand base and secure it in place using one M4x12 screw.
3. Illustration: Diagram showing the stand stem being attached to the stand base with an M4x12 screw.
4. Remove the upper foam packaging. Attach the assembled stand to the rear of the monitor using one M4x12 screw.
5. Illustration: Diagram showing the assembled stand being attached to the back of the monitor with an M4x12 screw.
6. Attach the stand trim cover to the assembled stand.
7. Illustration: Diagram showing the stand trim cover being attached to the stand.
8. Using both hands, carefully remove the monitor from the foam and place it on a flat surface.

Note: To avoid damaging the monitor, do not press on or hold the LCD screen during assembly.

VESA Mount Installation

Note: VESA mount or mounting accessories are not included.

To ensure sufficient ventilation, install the monitor at least 10 cm away from the wall and leave approximately 10 cm of space at either side of the monitor.

1. Open the box, remove the monitor keeping the protection foam attached, and gently place it on a desktop or table.
2. Remove the foam covering the rear of the monitor. Remove the stand plate. If the monitor is already attached to the stand, remove the stand.
3. Illustration: Diagram showing the rear of the monitor with the stand plate indicated for removal.
4. Insert two 27.5mm VESA screws into the upper holes on the rear of the monitor and two 17mm VESA screws into the lower holes.
5. Illustration: Diagram showing the placement of 27.5mm and 17mm VESA screws on the back of the monitor.
6. Assemble the monitor mount following the instructions provided with the mount.
7. Illustration: Diagram showing a generic VESA mount attached to a wall and the monitor.

Connectivity

Power

Connect the included power adapter to the monitor's power connector and then plug the other end into a power outlet.

Illustration: Diagram showing the power adapter connected to the monitor's power input and then to a wall outlet.

Audio

1. Connect a 3.5mm audio cable to the audio out port on the monitor.
2. Connect the audio cable to the 3.5mm port on your headphones or speakers.

Note: The monitor may need to be set as the PC's default sound output device.

Illustration: Diagram showing headphones connected to the monitor's audio out port via a 3.5mm cable.

HDMI Connection

Use an HDMI cable (not included) to connect the monitor to your computer.

Illustration: Diagram showing an HDMI cable connecting a PC's HDMI output to the monitor's HDMI input.

DisplayPort Connection

Use the included DisplayPort cable to connect the monitor to your computer.

Illustration: Diagram showing a DisplayPort cable connecting a PC's DisplayPort output to the monitor's DisplayPort input.

Operation

1. Connect the monitor to the input device via HDMI or DisplayPort.
2. Use the power button to turn the monitor on.

Monitor Controls

The monitor's On-Screen Display (OSD) menu and functions are accessed via the control buttons:

• 1. Menu button (M): Press to display the OSD menu or enter sub-menus.
• 2. Down button (∇): Press to move down in the menus.
• 3. Up button (Δ): Press to move up in the menus.
• 4. Exit button (E): Press to exit menus.
• 5. Power button (⏻): Press to turn the monitor on/off.
• 6. LED indicator: Changes colors to indicate status.

LED Indicator Status:

Illustration: Diagram showing the monitor control buttons and LED indicator.

FreeSync

• To use FreeSync, ensure your hardware has FreeSync capability and the graphics drivers are fully up to date.
• Connect your monitor using HDMI. You may receive a prompt to enable the feature on your computer. If not, enable it in your graphics card menu.
• Consult your graphics card manufacturer's documentation for instructions on how to turn on and/or enable FreeSync.

OSD Menu

Upon first use, the monitor automatically configures optimal display settings. The On-Screen Display (OSD) menu allows further adjustment of display settings.

1. Press any of the navigation buttons (M, ∇, Δ, E, ⏻) to activate the navigation window.
2. Illustration: Diagram showing the monitor control buttons and the activation of the navigation window with icons.
3. Press the Menu button (M) to select and enter the OSD menu.
4. Press the Up (Δ) or Down (∇) buttons to browse through the functions.
5. With the desired function highlighted, press the Menu button (M) to enter the sub-menu.
6. After making adjustments, press the Exit button (E) to save changes and return to the OSD menu.
7. Press the Exit button (E) again to exit the OSD menu entirely.

Illustration: Screenshot of the OSD menu showing Brightness, Contrast, ECO, and DCR settings.

OSD Menu Functions:

Game Plus & Display Mode

1. Press any of the navigation buttons (M, ∇, Δ, E, ⏻) to activate the navigation window.
2. Illustration: Diagram showing the monitor control buttons and the activation of the navigation window with icons.
3. Press the Down button (∇) to switch Game Plus modes. Choose the corresponding game icon based on your game's needs. These overlay icons are designed to assist aim in first-person shooter games.
4. Illustration: Diagrams showing different crosshair overlay icons for gaming.
5. Press the Up button (Δ) to switch display modes. Available modes include: Standard, Text, Movie, Game, FPS, and RTS. These modes optimize settings for different activities; Standard mode is suitable for most uses.
6. Illustration: Diagram showing a checkmark, possibly indicating selection of a mode.

Specifications

Notes

This section is for user notes.