Kogan Infinity 34" Curved Ultrawide Freesync Gaming Monitor User Guide

Safety & Warnings

• Read all instructions before using the monitor and retain them for future reference.
• This monitor features ventilation holes on the back of the casing. Do not cover or block them.
• Do not insert objects or spray liquids into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces, or other heat sources, as well as in poorly ventilated areas.
• Do not position the monitor in unstable or unsafe locations. If it falls, it may become damaged and could cause injury.
• Unplug the monitor if it will not be used for an extended period.
• Do not place heavy objects on the monitor, its power cord, or any connected cables.
• Do not open the rear panel of the monitor. It contains high-voltage components that can retain a charge even when unplugged.

The adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Components

• Monitor: A 34-inch curved ultrawide display.
• Stand Arm: Component for attaching the monitor to the base.
• Stand Base: The base that supports the monitor.
• M8x21.5 Screw: One screw for stand assembly.
• M4x16mm Screw (x5, 1 spare): Screws for VESA mounting.
• M4x7mm Screw (x5, 1 spare): Screws for VESA mounting.
• Power Cord: Cable to connect the power adapter to an outlet.
• Power Adaptor: Device to convert AC power to DC for the monitor.
• DP 1.4 Cable: DisplayPort cable for video connection.
• User Guide: This document.

Overview

The monitor features the following ports:

• 1. Power Input Port (DC)
• 2. USB-B (Upstream) Port
• 3. USB-A Port (x2)
• 4. HDMI Port
• 5. HDMI Port
• 6. DP Port
• 7. DP Port
• 8. 3.5mm Audio Output Port

For best results, an HDMI 2.1 cable is recommended when connecting to the monitor.

Controls

Indicator Light:

• Solid blue: Normal operating status.
• Indicator red: Low voltage, no video source. Ensure computer is turned on and cables are plugged in correctly.

Assembly

Stand Assembly

1. Place the monitor (with protective foam) flat on a stable, level surface.
2. Attach the monitor to the stand and tighten the 2 pre-assembled rotary screws to secure the stand arm to the stand base.
3. Carefully lift the monitor to a standing position. The assembly is now complete.

Note: During standing of the whole monitor, do not press the screen with hand to avoid damage to the screen.

Angle Adjustment

1. The screen can be adjusted by 5±2° forward and 15-20±2° backwards.
2. When adjusting the angle of the monitor, be sure not to touch or press the area of the screen.

Notes:

• Do not touch or press the screen when adjusting the angle of the monitor.
• The above pictures are for illustration purposes only. The actual product may differ.

Tilting: -5.0° (±5.0°) to +20° (±5.0°)

Vertical Adjustment: 115±5mm

VESA Mounting

1. To ensure sufficient ventilation, install the monitor at least 10cm away from the wall and leave about 10cm of space on each side of the monitor.
2. If you are not confident in wall mounting this product, consult a licensed trade professional.
3. Before installing the monitor on the wall, detach the stand from the monitor.
4. Place a clean, dry and lint-free cloth on a flat, stable surface.
5. Gently lay the monitor on the cloth with the screen facing down.
6. Identify the 4 wall mounting screw holes on the back of the monitor.
7. Install the wall mounting bracket (not provided) on the back of the monitor and attach the monitor to the wall according to the mounting bracket's instructions.
8. Ensure that all screws (not provided) are tightened and secured.

VESA mounting standard: 100 x 100mm

Recommended screw size for plate thickness 2-3mm: M4x7mm

Depending on your chosen VESA mount, you may need to use the provided M4 x 16mm or M4 x 7mm screws. Refer to the user guide of your VESA mount.

Use a wall mounting bracket and screws that conform to VESA standards. Ensure that the plate fits appropriately.

For more information, refer to the user guide for the wall mounting bracket.

This monitor does support wall mounting, however, due to its size, it is recommended to use a stand.

There are two kinds of screws in the accessory package:

• M4x16mm Screws (x5) (x1 Spare)
• M4x7mm Screw (x5) (x1 Spare)

1. Attach x4 M4x16mm Screws onto the rear of the monitor.
2. Attach the wall-mount to the monitor using x4 M4x7mm screws.

Connectivity

Note: Ensure the monitor is powered off before connecting any cables.

Connecting to Power

1. Plug the provided power adaptor into the monitor's DC port.
2. Connect the power adaptor to a properly grounded electrical outlet.
3. Locate the 'Power' button on the monitor and press it to turn the monitor on.

Diagram shows power adapter connected to monitor's DC port and power cord plugged into an electrical outlet.

HDMI Connection

1. Connect one end of the HDMI cable provided to your computer's HDMI port.
2. Connect the other end of the cable into the HDMI port on the monitor.

Display Port (DP) Connection

1. Connect one end of the provided DP cable to your computer's DP port.
2. Connect the other end of the cable into the DP port on your monitor.

Earphone Connection

Connect one end of an audio cable (not provided) to the earphone port on the monitor and the other end to your earphones.

Operation

Note: Ensure the monitor is powered off before connecting any cables.

Connecting to Power

1. Plug the provided power adaptor into the monitor's DC port.
2. Connect the power adaptor to a properly grounded electrical outlet.
3. Use the 'Power' button to turn the monitor on.

FreeSync/G-Sync

• To use this feature, ensure your hardware has FreeSync/G-Sync capability and the graphics drivers are fully up to date.
• After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu.
• See your graphics card manufacturer's documentation for instructions on how to turn on and/or enable FreeSync/G-Sync.

On Screen Menu

Functions of the monitor vary with models and the functions in this manual are for reference only.

Specifications

Notes

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.Kogan.com.