Blaupunkt Velocity Power Multimedia Navigation

Models:

Cape Town 900 DSP / 1000 DSP

Palm Springs 900 DSP / 1000 DSP

The first screen shows a 9.0-inch display with the time 05:02, date, and icons for BT Music, AUX, Radio, DSP, Settings, Phone, Car TPMS, Navi, Music, and Video. It indicates 'No Media Files'.

The second screen shows a 10.1-inch display with similar icons and time, also indicating 'No Media Files'.

Operating and Installation Instructions

Enjoy it.

Cautions

Safety Notes

This car radio is manufactured according to established safety guidelines. Failure to observe safety notes may result in danger. This manual familiarizes users with the car radio's functions. Keep it accessible and observe instructions for connected devices.

Road Safety

• Use the car radio in a way that complements driving safety. Park appropriately for operation. Avoid distracting applications like streaming while driving.
• For navigation, follow routes only if they comply with traffic regulations. Local signs and regulations take precedence.
• Keep volume at a moderate level to protect hearing and hear emergency signals. Do not increase volume when muted, as it may be too loud when unmuted.

General Safety Notes

• Intended for 12V vehicle systems. Install in a DIN slot. Observe output limits.
• Do not dismantle or modify the unit. Installation and repairs should be done by specialists. Blaupunkt is not liable for damage from unauthorized modifications.
• Core components may be damaged by prolonged driving on bumpy roads or playing damaged discs.
• Do not operate under extreme temperatures (-20°C to 70°C).
• For issues, refer to "Troubleshooting". Press Reset [?] for factory settings. Contact installer/seller if problems persist.
• Not all SD/USB file formats, codecs, bitrates, or resolutions are guaranteed to play.
• CAN-Bus functions may not be enabled if unsupported by the car or unit.
• Use a dry or slightly moistened cloth for cleaning. Avoid dashboard sprays and plastic care products, as they can damage surfaces.
• Manual updates may occur without notice. Visit www.blaupunkt.com for information.

Disclaimer

Blaupunkt is not liable for direct, indirect, punitive, incidental, or consequential damages arising from product use or misuse.

USA & CANADA: Product not intended for sale. If purchased in the U.S. or Canada, it is on an "as-is" basis with no warranty.

Disposal Notes

Do not dispose of old units in household trash. Use available return and collection systems.

Radios with Detachable Panel - Damage to the control panel

• Never drop the control panel.
• Transport the control panel protected against impacts and dirt.
• Do not expose the control panel to direct sunlight or heat sources.
• Avoid direct skin contact.

Scope of Delivery

• User Manual
• Connecting Cables
• AVN Harness
• TPMS Wire Harness
• USB Cables
• External Microphone
• GPS Antenna
• 4G Antenna
• 360 AVM (Optional)

Key Functions

The image displays the main unit's screen with numbered indicators pointing to different functions.

Functions

• 1. Microphone: (Likely for hands-free calls)
• 2. Reset: Press [?] to reboot the machine when it's not working properly.
• 3. Power Button: Press [▶️] to activate the system/mute volume. Press and hold to turn off the system.
• 4. Home Button: Returns to the main interface [?].
• 5. Back Button: Navigates to the previous screen [↩️].
• 6. Volume Up: Increases volume [➕].
• 7. Volume Down: Decreases volume [➖].

Operation

Home Page

Main Interface

Press the Home button [?] to return to the default main interface.

Press and hold the Home button [?] to clear background running programs.

Swipe left to access more applications.

Press the Apps button [?] to view all system applications.

Change Icon Position

Press and hold an icon. It becomes movable and can be repositioned.

Apps Info / Delete Apps

Press and hold an activated icon. Drag it to 'Apps Info' or the 'X' icon [❌] to delete.

Change Wallpaper

Press the Wallpaper button [?️] to change the main interface wallpaper.

Radio

To enter Radio Mode, press the "Radio" icon on the Main Menu.

The radio interface shows frequency tuning, preset stations (P1-P6), band selection (AM/FM), and various function buttons (Seek Down [⬇️], Seek Up [⬆️], RDS, AM/FM Band Switch, EQ, etc.).

Detailed Functions:

• 1. Radio scale: Displays signal strength.
• 2. Seek down: Tunes to the next lower frequency.
• 3. Radio frequency: Displays the current frequency.
• 4. Mono or Stereo: Determined by the radio IC.
• 5. LOC or DX: Selects local or distant reception.
• 6. Seek up: Tunes to the next higher frequency.
• 7. Active RDS Function: Enables/disables Radio Data System features.
• 8. Preset Station List: Accesses saved radio stations.
• 9. AM Band Switch: Switches between AM bands.
• 10. FM Band Switch: Switches between FM bands.
• 11. Seek Tuning: Press to start non-stop seek tuning; press again to cancel. Press and hold for switching preset channels; press again to cancel.
• 12. Locate and DX mode: Switches between local and distant reception modes.
• 13. EQ and FAB setting: Adjusts Equalizer and FAB settings.

RDS (Radio Data System)

Storing a Station

1. Select a station (e.g., FM1 103.6MHz).
2. Touch and hold the desired preset number (e.g., P1) to store the station.

BT (Bluetooth)

Pre-pair BT

Ensure your mobile phone supports Bluetooth. For best connection, maintain a distance of 3m without obstructions. Initial setup may require internet connection for Bluetooth registration.

Pairing

Turn on your mobile phone's Bluetooth. Select "CAPE TOWN 900 DSP/1000 DSP" or "PALM SPRINGS 900 DSP/1000 DSP" from the scanning list. Enter password "0000" if prompted. Confirm pairing. Successful pairing is indicated on the Home Page.

Delete Pairing

In the registered Bluetooth device list, select the device to delete and confirm with "OK".

Hands-Free Call

The Hands-Free Call screen shows icons for Dial Panel [?], Phone Book [?], Phone Call Record [?️], Device List [?], and Bluetooth Settings [⚙️].

Multimedia

Music Player

The Music Player screen shows track information, playback controls (Back [⏪], Previous [◀️], Pause [⏸️], Next [▶️], Repeat/Shuffle [?]), and EQ settings [?️].

Video Player

The Video Player screen shows video playback controls (Back [⏪], Previous [◀️], Pause [⏸️], Next [▶️], Repeat/Shuffle [?]) and a Full screen option [?].

DSP Setting

• 1. EQ: Adjust sound effects (Flat, Pop, Rock, etc.).
• 2. Curve: Adjust custom sound curves.
• 3. FAB: Adjust sound balance.
• 4. Delay: Adjust stereo and sound field delay.

Settings

1. Display

Brake Bypass: When OFF, displays warning information during video playback. This prevents drivers from watching videos while the vehicle is in motion.

2. General

Select options for adjustments.

3. Wi-Fi Setup

Turn on Wi-Fi [?] to search for and connect to available networks.

4. BT: Manage BT devices.

5. Language Setup: Select the desired language.

6. Source volume level: Adjust volume for each source.

7. Factory: Access factory configuration. Default Password: 8888.

8. Android Settings: Access Android-specific settings.

9. System Info: View system information.

Specifications

General

FM Stereo Radio

AM/MW Radio

Audio Specification

Input

BT

360 AVM (Optional)

Wiring Diagram

The wiring diagram shows the main unit with connectors labeled A, B, C, ANT, and GPS. Connectors B, C, D, E, F, G are detailed with pin assignments. The diagram illustrates connections for Front Camera, Rear Camera, Left Side Camera, and Right Side Camera, specifying wire colors (Black, Red, Yellow, Blue) and their corresponding functions (e.g., Reversing Light+, Left Turn Signal+, Right Turn Signal+).

360 Parking System Setup

NOTE: If the window is not showing, reboot the headunit manually [?].

Entering AVM

1. Go to Settings [⚙️] > Display > Camera Setting, then choose the camera icon [?].
2. Press the icon [▶️] to enter the 2D interface.
3. Select 'Set the camera hardware channel' > 'AVM', then return to Homepage. Confirm reboot when prompted. The 360 rear icon will appear after reboot.

Double tap the left side view for Panorama picture.

View Options:

• a. Switch to 3D view [3D]
• b. Left view eliminate distortion
• c. Right view eliminate distortion
• d. Front view eliminate distortion
• e. Rear view eliminate distortion
• f. Right view
• g. Front view
• h. Rear view
• i. Left view
• j. Left rear side view - 3D angle, showing the car's left rear view.

Additional View Options:

• k. Front left side view - 3D angle, showing the car's front left view.
• l. Right rear side view - 3D angle, showing the car's right rear view.
• m. Left front side view - 3D angle, showing the car's left front view.
• n. Limit of front wheel width view angle vertical view on screen middle.
• o. Front wheel line width view angle - vertical view on screen left side.
• p. Car front side - with car front radar sounding. Click to enter front view.
• q. Car front side - with car rear radar sounding. Click to enter rear view.
• r. Widthwise vertical view - with car rear radar sounding. Click to enter rear view.
• s. Front triad screen, with more view angle.
• t. Rear triad screen, with more view angle.

3D Interface

Press the 3D icon [3D] to enter the 3D interface.

3D Rotation

Rotate the 3D view.

Take Photo:

Support taking photos during driving [?].

Setting:

Access setup options [⚙️].

Setup Menu

The setup menu includes options for Car Model [?], Calibration [?], View Angle [?️], DVR [▶️], Settings [⚙️], and About [ℹ️].

A. Car Model

• 1. More vehicles: Click to select car model.
• 2. My garage: (Sedan, SUV, MPV)
• 3. Front view: Displays the front view.
• 4. View angle mode: (10°, 20°, 30°, 45°)
• 5. Vehicle color: Customize vehicle color.
• 6. Car mode: Select car mode.
• 7. License plate settings: Configure license plate display.

Screens show car models and angle adjustments.

B. Calibration

Enter password '8888' to access the calibration interface.

Screens show calibration options like 'Solving settings', 'Real-time calibration', 'Export settings', 'Cleanup calibration'.

C. View Angle.

Enter password '8888' to enter the view angle interface.

D. DVR

Access driving records, photos, and settings.

DVR Interface:

• 1. Date: Displays date.
• 2. Car driving video: Access recorded videos.
• 3. Driving photo: Access recorded photos.
• 4. Settings: Configure DVR settings.
• 5. Clear all: Delete all records.
• 6. Show the record: View specific records.
• 7. Delete the record: Delete a specific record.

Screens show options for storage duration and automatic recording.

E. Settings

• 360 settings: Configure 360 camera settings.
• Turning/Reversing settings: Adjust settings for turning and reversing cameras.
• Parking Line settings: Configure parking guide lines.
• User Car/Model settings: Customize settings for user's car model.
• About: View information about the system.

CAR TPMS

Main Interface

The main interface shows tire pressure, temperature, status (Normal/High/Low), sensor signal (Yellow for abnormal), and sensor voltage (Yellow for low). It includes icons for Sensor ID Pairing [?] and Settings [⚙️].

Sensor ID Pairing

1. Select a preferred tire

Choose a tire to start sensor ID pairing.

2. Start sensor ID pairing status

Shows the status of sensor ID pairing. Options to 'Pair' [✔️] or 'Cancel' [❌].

3. Sensor ID pairing process can be interrupted.

Displays a countdown timer [⏳] for pairing.

4. Timeout

The sensor ID pairing process times out and exits if it takes longer than 300 seconds.

Settings

1. Set pressure units (Psi/kPa/Bar)

2. Set temperature units (°C/°F)

3. Set low pressure alarm threshold

4. Set high pressure alarm threshold

5. Set high temperature alarm threshold

6. Alarm Sound: Enable/Disable

7. Show Spare Tire: Enable/Disable

8. Show Floating Ball: Enable/Disable

5. Sensor ID pairing is completed

Indicates successful pairing [✅].

Tire Exchange

1. Select the two tires that need to be exchanged

Choose tires for exchange.

2. Confirm tire exchange

Confirm whether to exchange the selected tires.

3. Tire exchange is completed

Indicates successful tire exchange.

Sensor Voltage

1. Display the voltage values of each sensor

Shows voltage for sensors.

TRUCK TPMS

Main Interface

The main interface shows tire number, pressure, temperature, and units. It includes icons for Sensor ID Pairing [?] and Settings [⚙️].

Sensor ID Pairing

1. Select a preferred tire

Choose a tire to start sensor ID pairing.

2. Start sensor ID pairing status

Shows the status of sensor ID pairing. Options to 'Pair' [✔️] or 'Cancel' [❌].

3. Sensor ID pairing process can be interrupted.

Displays a countdown timer [⏳] for pairing.

4. Timeout

The sensor ID pairing process times out and exits if it takes longer than 300 seconds.

Settings

1. Set pressure units (Psi/kPa/Bar)

2. Set temperature units (°C/°F)

3. Set low pressure alarm threshold

4. Set high pressure alarm threshold

5. Set high temperature alarm threshold

6. Alarm Sound: Enable/Disable

5. Sensor ID pairing is completed

Indicates successful pairing [✅].

Vehicle Type

1. Select the preferred vehicle type

Choose the vehicle type from available options.

2. Confirm Selection

Confirm the selected vehicle type.

Tire Exchange

1. Select the two tires that need to be exchanged

Choose tires for exchange.

2. Confirm tire exchange

Confirm whether to exchange the selected tires.

3. Tire exchange is completed

Indicates successful tire exchange.

Sensor ID

1. Display the ID numbers of each sensor

Shows ID numbers for sensors.

Sensor Voltage

1. Display the voltage values of each sensor

Shows voltage for sensors.

Wiring Diagram

The wiring diagram shows the main unit with connectors labeled A, B, C, ANT, and GPS. Connectors B, C, D, E, F, G are detailed with pin assignments. The diagram illustrates connections for Front Camera, Rear Camera, Left Side Camera, and Right Side Camera, specifying wire colors (Black, Red, Yellow, Blue) and their corresponding functions (e.g., Reversing Light+, Left Turn Signal+, Right Turn Signal+).

Troubleshooting

Consult a Blaupunkt authorized dealer if problems persist.

Blaupunkt Car Entertainment - Asia Pacific Competence Centre

CAPE TOWN 900 DSP
Part Number: 1 104 23 057 69 01

CAPE TOWN 1000 DSP
Part Number: 1 104 23 058 69 01

PALM SPRINGS 900 DSP
Part Number: 1 104 23 059 69 01

PALM SPRINGS 1000 DSP
Part Number: 1 104 23 060 69 01