Samsung SHP-R80 User Manual

1 Components

The Samsung SHP-R80 smart door lock comprises several key components:

Exterior Unit

This is the part visible from the outside of the door. It includes:

• Fingerprint sensor: For biometric authentication.
• Keypad: For entering PIN codes.
• Privacy mode LED: Indicates privacy mode status.
• Proximity detector: Detects user presence to activate the keypad.
• Away mode LED: Indicates away mode status.
• Door LED: General status indicator.
• Fingerprint LED: Indicates fingerprint sensor status.
• Battery replacement LED: Alerts when batteries need replacement.
• Keytag sensor: For authentication using keytags.
• Emergency LED: Indicates emergency status.
• Reset button: Used for resetting settings.
• Exterior lever: For manual operation.
• Power input: For emergency power connection.

Lower Exterior Unit

• Latch open button: To manually retract the latch.
• Mechanical override hole: For emergency mechanical key access.

Interior Unit

This is the part installed on the inside of the door. It includes:

• Battery cover: Covers the battery compartment.
• Battery tray: Holds the batteries.
• [OPEN/CLOSE] button: For opening the door from the inside.
• Proximity sensor: Detects hand presence on the interior lever.
• Manual door lock: For manual locking/unlocking from the inside.
• Volume control switch: Adjusts system sound volume.
• Wireless module cover: Covers the wireless module.
• Screw cover: Hides mounting screws.
• Register button: Initiates registration modes for authentication methods and Wi-Fi.
• Wireless module installation unit: For installing the Wi-Fi module.

Mortise

The internal mechanism that secures the door, including the dead bolt and latch bolt.

Strike Box

The metal plate on the door frame that receives the latch and dead bolt.

Product Specifications

Note: Product components may vary depending on installation environment.

2 Names and Functions

This section details the specific functions of each component listed above, referring to the diagrams provided in the original document.

[Detailed descriptions of each component's function would go here, referencing the visual layout from the PDF.]

Exterior Unit Functions:

• Fingerprint sensor: Reads registered fingerprints for authentication.
• Keypad: Allows entry of numerical passwords.
• Proximity detector: Activates the keypad when a user approaches.
• Keytag sensor: Reads registered keytags for authentication.
• Exterior lever: Used for manual door operation.

Interior Unit Functions:

• [OPEN/CLOSE] button: Opens the door from the inside.
• Proximity sensor: Detects hand presence on the interior lever.
• Manual door lock: A physical knob or lever for manual locking/unlocking.
• Volume control switch: Adjusts audio feedback volume (mute [0], standard [1], max [2]).
• Register button: Initiates registration modes for authentication methods and Wi-Fi.

Lower Exterior Unit Functions:

• Latch open button: Manually retracts the latch.
• Mechanical override hole: Slot for inserting a mechanical key in emergencies.

3 Open Door from Outside

The door can be opened from the outside using several methods:

Fingerprint

The door unlocks when a registered fingerprint accurately contacts the fingerprint sensor. The sensor may require multiple attempts or angle adjustments for optimal recognition.

Master Password & User Password

1. Approach the door lock; the keypad will activate.

2. Enter the two random digits displayed on the keypad (this is the Randomizer function).

3. Enter your registered password (4-12 digits) and press the [*] button to unlock the door.

User Manner Function (Sound Muted): Press the [*] button before entering the password to temporarily mute all sounds.

References:

• The keypad must be touched to activate before entering a password.
• Entering an incorrect password 5 consecutive times will suspend operation for 3 minutes.
• Pressing the [security-button] can cancel an entry and allow re-entry.

Keytag/Mobile Key

The door opens when a registered keytag or mobile key (smartphone) is placed accurately on the fingerprint sensor area.

References:

• For mobile key access, the smartphone screen must be on.
• Mobile key functionality typically requires the Samsung Smart Doorlock app and NFC support on Android devices.

4 Open/Close Door from Inside

The door can be operated from the inside in multiple ways:

Open by Touching the Interior Lever

Touching the interior lever activates the proximity sensor, turning the [OPEN/CLOSE] button LED green. Lightly push the lever to open the door.

References:

• The interior lever is set to "touch mode" by default. This can be configured for single-touch, multi-touch, or deactivated.
• Ensure the proximity sensor is clean for proper operation.

Open by Pressing the [OPEN/CLOSE] Button

Pressing the [OPEN/CLOSE] button on the interior unit will open the door.

Open by Using the Manual Door Lock

Turn the manual door lock lever to the unlocked position [manual-lock-lever] to open the door.

Close Door

The door can be set to lock automatically or manually:

• Auto lock (A): The door automatically locks when closed. This is the default setting.
• Manual lock (M): The door remains unlocked even after closing, allowing unrestricted access. It can be locked manually via the interior unit's [OPEN/CLOSE] button or the exterior keypad.

Configuration Tip: The Auto/Manual Lock mode can be switched using the conversion switch located inside the battery cover.

Caution: In manual lock mode, the door will still auto-lock if not opened within 7 seconds after unlocking.

5 Register Authentication Method

Authentication methods (passwords, keytags, fingerprints) can only be registered when the door is open. Access the registration mode by opening the wireless module cover on the interior unit and briefly pressing the [Register] button. Voice guidance will direct the process.

Note: Registration mode is active for 60 seconds. It is recommended to register when someone is present inside the house.

Registration Mode Options:

• Change Master Password
• Register User Password
• Register Keytag
• Register Fingerprint

Registration Status Indicators:

• + Add/Register
• - Delete individual
• ✔️ Registration and configuration complete
• ❌ Registration and configuration failed

Tip: The wireless module cover can be opened by pressing the middle bottom part and pulling.

Register (Add) Keytag / Delete Individual Keytag / Delete All Keytags

Up to 100 keytags can be registered. They can be added or deleted individually or all at once.

1. Register (Add) Keytag: Place keytags on the sensor continuously.
2. Delete individual keytag: Select keytags to delete.
3. Delete all keytags: Removes all registered keytags.

References: Verify registration by opening the door with the keytag. Ensure the door is closed after completion.

Caution: Only Samsung SDS keytags are supported. Using unauthorized keytags may void the warranty.

Register (Add) Fingerprint / Delete Individual Fingerprint / Delete All Fingerprints

Up to 100 fingerprints can be registered. They can be added or deleted individually or all at once.

1. Register (Add) Fingerprint: Place finger on the sensor, changing angle 6 times.
2. Delete individual fingerprint: Select fingerprints to delete.
3. Delete all fingerprints: Removes all registered fingerprints.

How to Register Fingerprint: Place a finger on the sensor and change its angle 6 times. The keypad will indicate registration progress. Press the [Register] button upon completion.

References: Registering thumbs or index fingers is recommended. Recognition may be affected by age, damage, or improper sensor contact. Keep the sensor clean and avoid static discharge.

Change Master Password

The master password can be changed. The default is "1234". It is crucial to change this immediately after installation.

References: A voice prompt will remind users to change the default password. Passwords should be at least 6 digits and changed regularly for security.

Caution: The password cannot be deleted; a new one must be registered. If the new password is forgotten, initialize key information to reset.

Register (Add) User Password / Delete Individual User Password / Delete All User Passwords

User passwords (4-12 digits) can be registered, added, or deleted individually or collectively. Up to 100 passwords, keytags, and mobile keys can be registered.

1. Register (Add) Password: Enter passwords continuously.
2. Delete individual password: Select passwords to delete.
3. Delete all passwords: Removes all registered passwords.

Samsung Smart Doorlock App Installation and Registration

Registering the door lock with the Samsung Smart Doorlock app enables IoT services like remote door open and push notifications.

App Installation: Search for 'Smart Doorlock' in the Google Play Store (Android) or App Store (iOS).

Wi-Fi Registration Tip: Press the [Register] button on the interior unit for 5 seconds to register Wi-Fi. Ensure the Wi-Fi router is on and select the 2.4GHz band if using a dual-band router.

6 Additional Functions and Setting Method

Various functions can be configured to enhance usability and security:

• Welcome Function: Activates the keypad and sensor areas when a user approaches. Can be configured with a security mode that triggers an alarm if someone remains at the door for over a minute.
• Dual Authentication Function: Requires consecutive authentication via password and fingerprint. Recommended for enhanced security, especially on ground floors. Requires at least one fingerprint to be registered.
• Auto Lock Time Setting Function: Allows users to set the time delay before the door automatically locks.
• Voice Guidance: Provides audio assistance for door lock operations. Enabled by default.
• Wi-Fi Configuration Function: Enables app-based services when the Wi-Fi module is installed. Recommended to disable if the app is not used to save battery.
• Volume Settings: Adjusts system, keypad, and voice guidance volumes using the switch inside the battery cover. Options: Mute [0], Standard [1] (default), Max [2].

Configuration Process: Open the wireless module cover, press the [Register] button, and follow voice prompts to select and configure functions. Pressing the [Register] button again can suspend configuration.

Note: The door does not lock automatically while in configuration mode.

Function Configuration Table

The following table outlines how to activate or deactivate various functions by pressing specific button sequences:

References:

• Recognition distance may vary with lighting conditions.
• When configuring Welcome mode in areas with strong sunlight or permanent lighting, be aware of potential alarm activation.
• WPS (Wi-Fi Protected Setup): A function for app users to easily connect to Wi-Fi without complex processes when changing routers. Requires a WPS-compatible router.

7 How to Use Security Function

• Randomizer Function: Enter two random digits before your password to prevent password leakage.
• Away Mode Function: Activated when leaving the house. If the door is opened from the inside within 3 seconds of activation, an alarm sounds and the external LED flashes. Recommended for use when no one is home.
• Privacy Mode Function: Restricts the door from being opened from the outside. It can be configured via the mobile app when all family members are home. Use with caution if children are present. Can be enabled by pressing the [OPEN/CLOSE] button for 3 seconds while locked, and disabled by a short press of the same button or turning the manual lock.
• Anti-Tampering Function: If authentication fails 5 consecutive times (password, fingerprint, keytag, mobile key), the door lock operation is suspended for 3 minutes, and an alarm sounds.
• Intrusion Detection Function: Triggers a 5-minute alarm if the door is forcefully opened from inside or outside while locked. This is a default, non-disableable function.
• High Temperature Alarm Function: Activates an alarm if the indoor temperature exceeds approximately 70°C (±10°C), indicated by flashing LEDs. The door lock is automatically disabled and restores operation when the temperature drops. This is a default, non-disableable function.

8 Initialization

Initialization resets specific settings to their default states.

• Initialize Linked Information (Wi-Fi / Remote Controller): Resets mobile key and Wi-Fi registration information. Master password, user passwords, fingerprints, and keytags remain unchanged.
• Initialize Key Information: Resets the master password to "1234" and deletes all registered fingerprints, keytags, and app information.

Tip: Initialization performs a factory reset of configured information.

Caution: After initialization, the password defaults to "1234". It must be changed immediately.

9 How to Replace the Battery and Open the Door During an Emergency

Battery Replacement

Replace batteries immediately when the voice guidance or battery replacement LED [battery-led] indicates low power. Failure to do so may cause the lock to shut down.

Procedure: Push the interior unit cover upwards to remove it and replace the batteries.

Cautions:

• Battery life varies by manufacturer and usage.
• Check battery status every 6 months to prevent leaks.
• Low battery may restrict access to registration or configuration modes.
• Always replace all batteries with new ones; do not reuse old batteries.

Emergency Door Open

If the door lock fails due to low battery or other circuit errors, emergency methods can be used:

• Emergency Power: Purchase a 9V (6LF22) battery. Connect it to the exterior unit's power input. Wait 20 seconds after the beep, then perform normal authentication (fingerprint/password/keytag) to unlock.
• Mechanical Override: Insert a mechanical key into the [mechanical-override-hole] at the bottom of the exterior unit and turn the key to unlock.

Caution: Keep a mechanical override key in a safe, separate location outside the home (e.g., in a vehicle or at the office).

Safety Caution

Please read and comply with the following safety precautions to ensure user safety and prevent property damage:

• Do not install or repair without authorization.
• Ensure the gap between the door and frame does not exceed 5 mm.
• Avoid prolonged direct sunlight exposure on the touchpad to prevent damage.
• Do not apply excessive force or use sharp tools on the lock buttons.
• Operate with dry hands and prevent liquids from entering the product.
• Clean with a soft, dry cloth; avoid water, benzene, or alcohol.
• Always check if the door is completely locked when leaving.
• Manage passwords securely and change them regularly.
• Insert batteries correctly, observing polarity (+/-). Incorrect insertion can cause leaks or rupture.
• Battery consumption may increase in unfavorable wireless environments.
• Wireless radio waves or other devices may cause interference, potentially suspending safety-related services.
• Product performance may be affected by high humidity.
• Maintain at least 20 cm distance from the product during use.

Notes:

• Installation by a professional is recommended. Fees may apply for customer-caused defects.
• User manuals are subject to change for product improvement. Images may differ from the actual product.
• Ensure at least one mechanical override is stored separately or carried by the user.
• This door lock does not require a traditional key. Product failure may result in partial damage.
• Users should be familiar with manual door lock operation for unforeseen circumstances.