IKEA GRUNDAD Hob Installation Guide

Important Safety Information

Warning! Before proceeding with installation, read the safety information in the User Manual.

This warning is provided in multiple languages, including German, French, Italian, Danish, Norwegian, Finnish, Swedish, Icelandic, Portuguese, Spanish, Greek, Dutch, Polish, Turkish, Russian, Slovak, Lithuanian, Czech, Hungarian, Bulgarian, Romanian, Croatian, Serbian, Slovenian, Estonian, Latvian, Ukrainian, and Arabic.

Installation Overview

This document provides instructions for installing the IKEA GRUNDAD hob.

Tools and Materials Required:

• Drill
• Pencil
• Gloves
• Jigsaw
• Measuring tape

General Safety Precautions:

• Ensure electrical connections are made by qualified personnel.
• Do not operate the appliance if the power cord is damaged.
• Follow all safety instructions provided in the user manual.

Step-by-Step Installation

Step 1: Prepare the Countertop

Measure and mark the cutout dimensions on the countertop. The recommended cutout dimensions are 560±1 mm in width and 490±1 mm in depth. Ensure a minimum clearance of 55 mm from the edge of the countertop.

Drill pilot holes with a 10 mm diameter at the marked corners.

Step 2: Cut the Opening

Use a jigsaw to carefully cut out the opening in the countertop along the marked lines.

Step 3: Prepare the Cabinetry

Ensure the cabinet below the countertop is prepared according to the specifications. The diagram shows a cabinet with drawers. A minimum clearance of 50 mm is required above the hob, and a minimum of 28 mm from the front edge of the cabinet. For ventilation, a minimum of 5 mm is needed around the hob.

Step 4: Install the Hob

Carefully lower the hob into the prepared opening. Ensure it sits flush with the countertop. The hob should click into place.

Step 5: Electrical Connection

Connect the hob to the electrical supply. Warning: Improper electrical connections can be dangerous. Refer to the user manual for detailed wiring instructions. An "E" symbol may indicate an electrical connection point.

Step 6: Final Placement and Clearances

Ensure the hob is correctly positioned. The diagrams indicate specific clearance requirements:

• A minimum of 20 mm clearance is needed above the hob.
• A minimum of 18 mm clearance is required for the hob's edge.
• A minimum of 5 mm clearance is needed at the front.
• A minimum of 28 mm clearance is needed from the front edge of the cabinet.

Refer to the included NYTTIG manual for further details.

Product Specifications and Dimensions

The GRUNDAD hob has the following approximate dimensions:

• Width: 590 mm
• Depth: 520 mm
• Cutout Width: 560±1 mm
• Cutout Depth: 490±1 mm
• Edge Clearance: 55 mm
• Minimum clearance above: 500 mm (from cooking surface)
• Minimum clearance from cabinet front edge: 28 mm
• Minimum ventilation clearance: 5 mm
• Minimum edge clearance: 18 mm

Additional Information

For detailed troubleshooting, maintenance, and warranty information, please refer to the IKEA user manual for the GRUNDAD hob.

Contact Information:

For support, please visit the IKEA website or contact your local IKEA store.