Important Safety Information
⚠️ Warning! Before proceeding with installation, please read the safety information provided in the user manual.
This document contains safety warnings in multiple languages, including:
- English
- German
- French
- Italian
- Danish
- Norwegian
- Finnish
- Swedish
- Icelandic
- Portuguese
- Spanish
- Greek
- Dutch
- Polish
- Turkish
- Russian
- Slovak
- Lithuanian
- Czech
- Hungarian
- Bulgarian
- Romanian
- Croatian
- Serbian
- Slovenian
- Estonian
- Latvian
- Ukrainian
- Arabic
Installation Overview
This guide provides step-by-step instructions for installing the IKEA MATMÄSSIG induction hob.
Preparation and Tools
Ensure you have the necessary tools and materials before starting. This may include:
- Drill (?️)
- Pencil (✏️)
- Gloves (?)
- Jigsaw (?)
- Measuring tape
Safety Note: Handle materials carefully to avoid damage. Follow all safety instructions.
If you encounter difficulties or have questions, contact IKEA customer support.
Dimensions and Cutout Requirements
Proper dimensions are crucial for safe and correct installation. Refer to the following:
- Minimum clearance above the hob: 500 mm
- Hob width: 590 mm
- Hob depth: 520 mm
- Required countertop cutout width: 560±1 mm
- Required countertop cutout depth: 490±1 mm
- Front edge clearance from hob: 55 mm
- Back edge clearance from hob: 5 mm
- Minimum clearance from the underside of the countertop to the hob: 12 mm
- Minimum clearance from the front edge of the hob to the cabinet front: 20 mm (for installation into cabinets without an oven)
- Minimum clearance from the front edge of the hob to the cabinet front: 28 mm (for installation above an oven)
- Minimum side clearance to cabinet: 50 mm
Installation Steps
Step 1: Mark the Cutout
Using a pencil and measuring tape, mark the precise cutout dimensions on the countertop. Drill pilot holes (4x Ø 10 mm) at the corners of the marked area to facilitate cutting.
Step 2: Cut the Opening
Use a jigsaw (?) to carefully cut along the marked lines, creating the opening for the induction hob.
Step 3: Install the Hob
Carefully lower the MATMÄSSIG induction hob into the prepared cutout. The hob is designed to click securely into place.
⚠️ Electrical Safety: Ensure proper electrical connections are made according to the user manual and local regulations. If unsure, consult a qualified electrician.
ℹ️ Refer to the "NYTTIG" manual for additional details on installation and usage.
Step 4: Final Placement and Clearances
Ensure all required clearances are maintained as specified in the dimensions section. This includes clearances from surrounding cabinets, ovens, and the underside of the countertop.
The hob should sit flush with the countertop, with appropriate support and ventilation.
Product Information
Model: MATMÄSSIG
Series: METOD
Manufacturer: IKEA
Product Code: AA-2198466-1
Article Number: 21552
© Inter IKEA Systems B. V. 2020
