ESR 3-in-1 Charging Station with CryoBoost

Product Components

• 1. Phone wireless charging pad
• 2. Earphone wireless charging pad
• 3. USB-C input port
• 4. USB-C output port
• 5. CryoBoost status light
• 6. Earphone status light & CryoBoost switch
• 7. Power adapter
• 8. USB-C to USB-C cable

Important Reminders

• Always use the included charging cable and the power adapter for best results.
• This charger requires an input of 20V⎓2.25A or 15V⎓3A. The maximum output is 25W for the phone charging pad, 5W for the earphone wireless charging pad, 5W for the Apple Watch charging pad, and 5W for the USB-C port.
• This charger is designed only for:
  • iPhones with MagSafe
  • Phones with Apple, Samsung, or ESR magnetic cases
  • ESR Universal Ring for non-magnetic cases

Safety Tips

• Operating temperature: -10°C to 45°C. Storage temperature: -40°C to 85°C.
• Do not expose the charger to water or fire, as this could cause short circuits, electric leakage, or permanent damage.
• Check the charger before use. If you notice any cracks or issues, stop using it immediately.
• Do not disassemble or modify the product for any reason. This may cause malfunctions, damage, or lead to children ingesting parts.
• Do not use the charger in places with high heat, moisture, or corrosive materials, as this could permanently damage it. Damage from these conditions is not covered by the warranty.
• This charger contains magnets that may interfere with medical devices like pacemakers or defibrillators. Keep a minimum distance of 15 cm (6 inches), and at least 30 cm (12 inches) during wireless charging. If interference is suspected, stop use immediately and consult a doctor or the device manufacturer.

LED Light Indicator Guide

Troubleshooting: Phone Not Charging

• Ensure your phone supports wireless charging. Remove any objects on the back, such as metal, magnets, or credit cards.
• Try using a different charger or power bank to see if your phone charges properly. Then, reconnect the cable and restart wireless charging to check if it works.
• Fast charging requires a 50W (15V⎓3A) or higher power input. If the input is insufficient, fast charging is not supported.

Regulatory Compliance

FCC Compliance:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC ID: 2APEW-2C588

ISED Compliance (Canada):

IC: 24790-2C588. This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10 centimeters between the radiator and your body.

European Community Compliance (CE):

This product complies with the radio interference requirements of the European Community. This product is intended for use within Europe. Electronic Silk Road Corp. hereby declares that this product 2C588 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU, 2014/30/EU. The Declaration of Conformity for the 2C588 is available from www.esrgear.com.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.