ESR HaloLock Magnetic Wireless Car Charger

User Manual

Package Contents

Magnetic Wireless Charger Car Mount
Type-C Data Cable
User Manual
Adhesive Base
Spare Adhesive
Clip

Product Introduction

The ESR HaloLock Magnetic Wireless Car Charger is designed for secure and convenient phone charging in your car. It features strong magnetic locking, adjustable viewing angles, and fast wireless charging capabilities.

Installation

1. Air Vent Mount Installation

Step 1: Attach the mount to the air vent clip.

Diagram Description: Shows the magnetic charger base with a ball joint being inserted into the air vent clip.

Step 2: Secure the clip to the air vent.

Diagram Description: Shows the air vent clip being attached to a car's air vent louvers.

Step 3: Connect the Type-C cable.

Diagram Description: Shows the Type-C cable plugged into the charger and the other end connected to a car charger adapter.

Step 4: Place your phone.

Diagram Description: Shows a smartphone with a HaloLock case being magnetically attached to the charger.

Features: Strong magnetic hold, 360° rotation, adjustable arm.

2. Dashboard Mount Installation

Step 1: Peel off the protective film from the adhesive base.

Diagram Description: Shows the adhesive base with a protective film being peeled off.

Step 2: Attach the adhesive base to the dashboard.

Diagram Description: Shows the adhesive base being pressed onto a car dashboard surface.

Step 3: Attach the mount to the base.

Diagram Description: Shows the magnetic charger base with a ball joint being inserted into the socket on the adhesive base.

Step 4: Place your phone.

Diagram Description: Shows a smartphone being magnetically attached to the charger.

Features: Strong adhesive, stable mounting, 360° rotation.

HaloLock Compatibility

Compatible with iPhone 12 series and later with HaloLock cases or official MagSafe cases. For other devices, use a HaloLock case or the included magnetic ring.

Diagram Description: Shows an iPhone 13 with a HaloLock case being attached. Shows an iPhone 11 with a magnetic ring attached.

Charging Specifications

Input: 5V/2A, 9V/1.67A (Max).

Output: 5W, 7.5W, 10W, 15W (Max).

Supports Qi wireless charging standards.

Diagram Description: Shows the charger with a phone attached, with an indicator light showing charging status.

Safety Precautions

Do not expose to water or moisture.
Avoid extreme temperatures.
Keep away from magnetic stripe cards.
Use only the provided cable and a certified car charger adapter.
Do not attempt to disassemble.

Troubleshooting

Issue: Phone not charging.

Possible Solutions:

Ensure phone is properly aligned with the charger.
Check cable connections.
Use a compatible case or magnetic ring.
Ensure car charger adapter provides sufficient power.

Issue: Mount is unstable.