AcuRite 02050CCDI / 440601 Weather Station Instruction Manual

Introduction

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.

Unpacking and Package Contents

Unpacking Instructions

Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.

Package Contents:

• Display unit with tabletop stand
• Outdoor sensor
• Instruction manual
• Power adapter

Features and Benefits

Outdoor Sensor

• 1. Integrated Hanger: For easy placement.
• 2. Wireless Signal Indicator: Flashes when data is being sent to the display unit.
• 3. Battery Compartment: Houses the batteries.
• 4. A-B-C Switch: ID code that must match the display's A-B-C switch to ensure units synchronize.
• 5. Battery Compartment Cover: Protects the battery compartment.

Display Unit Front

• 1. Current Outdoor Temperature: Arrow icon indicates the direction temperature is trending.
• 2. Outdoor Sensor Signal Strength: Indicates signal quality.
• 3. "HIGH" Indicator: Indicates today's HIGH records are being viewed.
• 4. "LOW" Indicator: Indicates today's LOW records are being viewed.
• 5. Sensor Low Battery Indicator: Alerts when sensor batteries are low.
• 6. Current Outdoor Humidity: Arrow icon indicates the direction humidity is trending.
• 7. Current Indoor Humidity: Displays current indoor humidity.
• 8. Current Indoor Temperature: Displays current indoor temperature.
• 9. Moon Phase: Displays current moon phase.
• 10. AUTO DIM Icon: Indicates display backlight "AUTO DIM" mode activated.
• 11. Display Low Battery Indicator: Alerts when display batteries are low.
• 12. Removable Tabletop Stand: For upright display placement.
• 13. Date: Displays the current date.
• 14. Time: Displays the current time.
• 15. Current Barometric Pressure: Arrow icon indicates the direction pressure is trending.
• 16. Learning Mode Icon: Disappears after weather forecast self-calibration is complete.
• 17. 12 to 24 Hour Weather Forecast: Self-Calibrating Forecasting pulls data from the outdoor sensor to generate your personal forecast.
• 18. Momentary Backlight Button: Momentarily lights display (only applicable while on battery power).

Display Unit Back

• 1. Integrated Hang Hole: For easy wall mounting.
• 2. [▲ Button]: For setup preferences and viewing HIGH records.
• 3. SET Button: For setup preferences.
• 4. [▼ Button]: For setup preferences and viewing LOW records.
• 5. A-B-C Switch: ID code that must match sensor's A-B-C switch to ensure units synchronize.
• 6. RESET Button: Full reset to factory defaults.
• 7. Plug-in For Power Adapter: Port for connecting the power adapter.
• 8. Battery Compartment: For backup batteries.
• 9. Intelli-Time® Battery Compartment: For the internal clock battery.
• 10. Battery Compartment Cover: Secures the battery compartment.

Setup

Sensor Setup

1. Set the A-B-C Switch: The A-B-C switch is located inside the battery compartment. It can be set to A, B, or C. You must select the same letter choices for both the sensor and the display unit for synchronization.

2. Install or Replace Batteries:

AcuRite recommends high-quality alkaline or lithium batteries for best performance. Heavy-duty or rechargeable batteries are not recommended. The sensor requires lithium batteries in low temperatures.

Steps:

1. Slide off the battery compartment cover. Take note of the A-B-C switch setting inside.
2. Insert 2 x AA batteries into the battery compartment, following the polarity diagram.
3. Replace the battery cover.

Diagram Description: Shows the outdoor sensor with its battery compartment open, highlighting the A-B-C switch and the correct orientation for inserting two AA batteries. A table indicates that Lithium batteries are suitable for all temperatures, while Alkaline batteries are recommended for temperatures above -20°C (-4°F).

Display Unit Setup

1. Set the A-B-C Switch: Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B, or C. You must select the same letter choices for both the display unit and the sensor for synchronization.

2. Plug Power Adapter into Electrical Outlet: Connect the power adapter for primary power.

3. Install or Replace Backup Batteries (optional):

Steps:

1. Remove the battery compartment cover.
2. Insert 3 x AA alkaline batteries into the battery compartment, following the polarity diagram.
3. Replace the battery cover.

Diagram Description: Shows the display unit's battery compartment with three AA batteries being inserted, and the power adapter being plugged into an electrical outlet.

IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage. The power adapter is the recommended primary power source to enjoy the full functionality of this product.

BATTERY SAFETY: Please dispose of old or defective batteries in an environmentally safe way and in accordance with local laws and regulations. Clean battery contacts and device contacts prior to installation. Remove batteries from equipment not in use for extended periods. Follow polarity diagrams. Promptly remove dead batteries. Dispose of used batteries properly. Use only batteries of the same or equivalent type. DO NOT incinerate, dispose of in fire, mix old/new or types, use rechargeable, recharge non-rechargeable, or short-circuit terminals.

Intelli-Time® Clock

Intelli-Time products are pre-programmed with the correct time and date. Intelli-Time technology instructs the time and date to set themselves. Select your Time Zone and Daylight Saving Time preferences, and the clock will automatically set itself and change for Daylight Saving Time.

Set the Time, Date and Units

Press and release the [SET button] to enter SETUP MODE. The preference you are currently setting will blink on the display. To adjust the flashing item, press and release the [▲ button] or [▼ button] (press and HOLD to fast adjust). To save adjustments, press and release the [SET button] again to adjust the next preference.

The preference set order is as follows:

• LANGUAGE (English or French)
• COUNTRY (USA, CANADA, AUSTRALIA)
• DST* (Daylight Saving Time ON or OFF)
• TIME ZONE (AST, EST, CST, MST, PST, AKST, HAST, NST, AEST, ACST, AWST)
• CLOCK HOUR
• CLOCK MINUTE
• CALENDAR MONTH
• CALENDAR DATE
• CALENDAR YEAR
• TEMPERATURE SCALE (°F or °C)
• BAROMETRIC PRESSURE SCALE (inHg or hPa)

*If you live in an area that observes daylight saving time, DST should be set to ON, even if it is not currently Daylight Savings Time.

You will automatically exit SETUP MODE if no buttons are pressed for 20 seconds. Enter setup mode at any time by pressing the [SET button].

Display Backlight Settings

This weather station's color display features three brightness settings: High (100%), Medium (60%), and Low (30%).

• Using battery power alone: The backlight is available momentarily for 10 seconds by pressing the [BACKLIGHT button].
• When powered by the adapter: Backlight remains on at 100%. Press the [BACKLIGHT button] once to dim to 60%; press again to dim to 30%; press a third time to enter "AUTO DIM" mode.

AUTO DIM MODE: Automatically adjusts display brightness based on time of day:

• 6:00 a.m. - 9:00 p.m. = 100% brightness
• 9:01 p.m. - 5:59 a.m. = 30% brightness

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product.

Display Unit Placement:

Place the display unit in a dry area free of dirt and dust. The display unit stands upright for tabletop use or is wall-mountable.

Outdoor Sensor Placement:

The sensor must be placed outside to observe outdoor conditions. The sensor is water-resistant and designed for general outdoor use; however, to extend its life, place the sensor in an area protected from direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or by using string (not included) to hang it from a suitable location, like a well-covered tree branch. The best location is 1 to 2 meters (4 to 8 feet) above the ground with permanent shade and plenty of fresh air to circulate around the sensor.

Important Placement Guidelines:

• To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents.
• Display unit and outdoor sensor must be within 100 m (330 ft) of each other.
• To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 90 cm (3 ft) away from electronic devices (TV, computer, microwave, radio, etc.).

Diagram Description: Illustrates placement recommendations. Shows a TV and the weather station display unit separated by at least 90 cm (3 ft). Also shows the outdoor sensor and display unit within a 100-meter (330 ft) range, with a note to keep away from interference sources.

Setup is Complete: The sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. Please refer to the troubleshooting section of this manual if anything appears to be functioning improperly.

Operation

Using the Weather Station

Learning Mode:

Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location, and the unit is ready for superior weather prediction.

Weather Forecast:

AcuRite's patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy – personalized for your exact location.

Forecast Icons:

• STORMY: Depicted by lightning bolts.
• SNOW LIKELY: Depicted by snowflakes.
• SNOW / RAIN MIX LIKELY: Depicted by mixed snowflakes and raindrops.
• RAIN LIKELY: Depicted by raindrops.
• MOSTLY CLOUDY: Depicted by clouds.

(Note: A flashing icon indicates "stormy" conditions.)

View the complete list of icons at www.AcuRite.com/acurite-icons.

Barometric Pressure:

Subtle variations in barometric pressure greatly affect the weather. This weather station displays the current pressure with an arrow icon to indicate the direction the pressure is trending (FALLING, STEADY, or RISING).

Moon Phase:

Track the phases of the moon, conveyed through simple lunar phase icons: NEW, WAXING CRESCENT, 1ST QUARTER, FULL, 3RD QUARTER, WANING CRESCENT.

High & Low Records:

Today's high and low records are displayed for indoor and outdoor temperature and humidity. Today's records automatically clear at 12:00 am midnight every day. View today's high or low records by pressing and releasing the [▲ button] or [▼ button]. Press and release again to view current readings.

To manually clear all of today's LOW recorded values: Press and release the [▼ button] to view low records, then press and hold the [▼ button] for 2 seconds. Dashes display to confirm you have cleared the LOW records.

To manually clear all of today's HIGH recorded values: Press and release the [▲ button] to view high records, then press and hold the [▲ button] for 2 seconds. Dashes display to confirm you have cleared the HIGH records.

Troubleshooting

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.

Care and Maintenance

Display Unit Care:

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

Outdoor Sensor Care:

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Calibration

Calibrate Temperature and Humidity:

The indoor / outdoor temperature and humidity readings can be calibrated on the display unit to improve accuracy. Calibration can improve accuracy when sensor placement or environmental factors impact your data accuracy.

1. To access calibration mode, press AND HOLD the [▲ button], [SET button], and [▼ button] (located on the back of the display unit) for at least 5 seconds.
2. Once in calibration mode, the preference you are currently setting will blink on the display.
3. Press the [▲ button] or [▼ button] to calibrate the data value higher or lower from the actual reading.
4. Press the [SET button] to confirm the calibration adjustment. The [✔] icon will remain illuminated next to calibrated values.
5. The next adjustable data will begin flashing, indicating it is ready to be calibrated. Repeat Steps 1 - 4 to calibrate additional data.

Note: After 5 seconds of inactivity, the display will save the adjustments and exit calibration mode. Calibrations will be erased if the display is reset or if batteries are removed and the power adapter is unplugged.

Calibrate Barometric Pressure:

The weather station default pressure mode is "AUTO." In auto mode, the pressure will calibrate itself over a 14 day Learning Mode. Barometric pressure can be manually calibrated:

1. Press AND HOLD the [SET button] (located on the back of the display unit) for at least 10 seconds to enter manual pressure mode.
2. The un-calibrated pressure will be displayed. Press AND HOLD the [▲ button], [▼ button], and [SET button] for at least 5 seconds.
3. Press and release the [SET button] until barometric pressure is flashing.
4. Press the [▲ button] or [▼ button] to calibrate the data value higher or lower from the actual reading.
5. Press the [SET button] to confirm the calibration adjustment.

Note: The [✔] icon will remain illuminated next to the calibrated value. After 5 seconds of inactivity, the display will save your adjustments and exit calibration mode. Calibrations will be erased if the display is reset or if batteries are removed and the power adapter is unplugged.

To exit manual pressure mode and return to auto mode, press and hold the [SET button] for at least 10 seconds.

Replace Intelli-Time Clock Battery

Intelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. Time and date will need to be entered after replacing the Intelli-Time battery. To replace the Intelli-Time battery:

1. Locate the coin cell battery compartment door in the battery compartment of the display unit. Unscrew and remove the compartment cover.
2. Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with "+" positive terminal facing OUT.
3. Screw in the battery cover.

Diagram Description: Shows the CR2032 battery and its compartment within the display unit. Includes a prominent warning: "WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF SWALLOWED, IT COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS. SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED." Includes [POISON] symbols.

Specifications

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1. This device may NOT cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.

Customer Support

AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways:

• Phone: (877) 221-1252
• Email: info@chaney-inst.com
• Website: 24/7 support at www.AcuRite.com

Online Resources:

• Installation Videos
• Instruction Manuals
• Replacement Parts
• Register your Product
• Support User Forum
• Submit Feedback and Ideas

IMPORTANT: PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE.

PRODUCT REGISTRATION: Register online to receive 1 year warranty protection at www.AcuRite.com.

Diagram Description: Shows a "PRODUCT REGISTRATION" section with a button/link to "Register online" and the website www.AcuRite.com. Also shows links to "Support Forum" and "Register a Product".

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase.

We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.

Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some places do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney's products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from place to place.

For in-warranty claims:

Chaney Instrument Co. | 965 Wells St. | Lake Geneva, WI 53147

Product Overview

AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. Products include Weather Stations, Temperature and Humidity monitors, Weather Alert Radios, Kitchen Thermometers and Timers, and Clocks.

Tagline: "It's more than accurate, it's ACU RITE."

Website: www.AcuRite.com

Copyright information: ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.