AcuRite 01086 Weather Station Instruction Manual

Introduction

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.

Unpacking Instructions

Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.

Package Contents

1. Display unit with tabletop stand
2. Outdoor sensor
3. Instruction Manual

Features & Benefits: Outdoor Sensor

1. Integrated Hanger:

For easy placement.

2. Wireless Signal Indicator:

Flashes when data is being sent to the display unit.

3. Battery Compartment

4. A-B-C Switch:

ID code that must match display's A-B-C switch to ensure units synchronize.

5. Battery Compartment Cover

Features & Benefits: Display Unit Front

1. Current Outdoor Temperature

2. Outdoor Low Temperature Record:

Lowest temperature recorded since midnight.

3. Outdoor High Temperature Record:

Highest temperature recorded since midnight.

4. 12 to 24 Hour Weather Forecast:

Self-Calibrating Forecasting pulls data from the outdoor sensor to generate your personal forecast.

5. Learning Mode Icon:

Disappears after weather forecast self-calibration is complete.

6. Intelli-Time® Clock:

Automatically updates for Daylight Saving Time.

7. Time Zone

8. Current Indoor Temperature

9. "▼" Arrow:

For setup preferences.

10. Humidity Level Icon:

Indicates a high, low or ideal indoor humidity level.

11. "OK" Button:

For setup preferences.

12. Display Unit Low Battery Indicator

13. "▲" Arrow:

For setup preferences.

14. Current Indoor Humidity

15. Date

16. Day of the Week

17. Pressure History Chart:

Displays the past 12 hours of data for barometric pressure.

18. Current Barometric Pressure:

FALLING, STEADY or RISING indicates the direction pressure is trending.

19. Outdoor Low Humidity Record:

Lowest humidity recorded since midnight.

20. Outdoor High Humidity Record:

Highest humidity recorded since midnight.

21. Current Outdoor Humidity

22. Historical Barometric Pressure:

Pressure reading 12 hours ago.

23. Outdoor Sensor Signal Strength

24. Sensor Low Battery Indicator

25. Momentary Backlight Button:

Activates momentary backlight.

Features & Benefits: Display Unit Back

26. Integrated Hang Hole:

For easy wall mounting.

27. A-B-C Switch:

ID code that must match sensor's A-B-C switch to ensure units synchronize.

28. Reset:

Full reset to factory defaults.

29. Battery Compartment

30. Battery Compartment Cover

Setup

Sensor Setup

1. Set the A-B-C Switch: The A-B-C switch is located inside the battery compartment. It can be set to A, B, or C. You must select the same letter choices for both the sensor and the display unit in order for the units to synchronize.
2. Install or Replace Batteries: AcuRite recommends high-quality alkaline or lithium batteries for the best product performance. Heavy-duty or rechargeable batteries are not recommended. The sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the sensor for temperatures below -4°F / -20°C.
   1. Slide off the battery compartment cover. Take note of the A-B-C switch setting inside the battery compartment.
   2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
   3. Replace the battery cover.

Diagram Description: Shows the back of the outdoor sensor with the battery compartment open, illustrating the insertion of two AA batteries and the A-B-C switch.

Display Unit Setup

1. Set the A-B-C Switch: Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B, or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize.
2. Install or Replace Backup Batteries:
   1. Remove the battery compartment cover.
   2. Insert 3 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
   3. Replace the battery cover.

Diagram Description: Shows the back of the display unit with the battery compartment open, illustrating the insertion of three AA batteries and the A-B-C switch.

Battery Safety and Disposal: Please dispose of old or defective batteries in an environmentally safe way and in accordance with your local laws and regulations. Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. Do not incinerate used batteries. Do not dispose of batteries in fire, as batteries may explode or leak. Do not mix old and new batteries or types of batteries (alkaline/standard). Do not use rechargeable batteries. Do not recharge non-rechargeable batteries. Do not short-circuit the supply terminals.

Intelli-Time® Clock

Intelli-Time products are pre-programmed with the correct time and date. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically update for Daylight Saving Time.

Set the Time, Date & Units

Press and HOLD the "OK" button to enter SETUP MODE. Once in setup mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the "▲" or "▼" buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the "OK" button again to adjust the next preference. The preference set order is as follows:

• TIME ZONE (PST, MST, CST, EST, AST, HAST, AKST)
• DST* (Daylight Saving Time ON or OFF)
• CLOCK HOUR
• CLOCK MINUTE
• CALENDAR DATE
• CALENDAR MONTH
• CALENDAR YEAR
• TEMPERATURE SCALE (°F or °C)
• BAROMETRIC PRESSURE SCALE (inHg or hPa)

*If you live in an area that observes daylight saving time, DST should be set to ON, even if it is not currently Daylight Savings Time.

You will automatically exit SETUP MODE if no buttons are pressed for 20 seconds. Enter setup mode at any time by pressing the "OK" button.

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product.

Display Unit Placement

Place the display unit in a dry area free of dirt and dust. The display unit stands upright for tabletop use or is wall-mountable.

Outdoor Sensor Placement

The sensor must be placed outside to observe outdoor conditions. The sensor is water-resistant and is designed for general outdoor use; however, to extend its life, place the sensor in an area protected from direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or by using string (not included) to hang it from a suitable location, like a well-covered tree branch. The best location is 4 to 8 feet above the ground with permanent shade and plenty of fresh air to circulate around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents.
• Display unit and outdoor sensor must be within 330 ft (100 m) of each other.
• To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (0.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).

Diagram Description: Illustrates placement guidelines. Shows a TV at least 3 feet (0.9m) away from the display unit. Shows the outdoor sensor placed outside, with a range of 330 feet (100 meters) indicated. Also shows the sun and a tree for context.

Setup is Complete: The sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. Please refer to the troubleshooting section of this manual if anything appears to be functioning improperly.

Operation

Using the Weather Station

Learning Mode

Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location, and the unit is ready for superior weather prediction.

Weather Forecast

AcuRite's patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy – personalized for your exact location.

Forecast Icons:

• RAIN/SNOW MIX LIKELY: Icon depicting rain and snow mix.
• SNOW LIKELY: Icon depicting snow.
• LIGHT RAIN LIKELY: Icon depicting light rain.
• CLOUDY: Icon depicting clouds.
• MOSTLY CLOUDY: Icon depicting mostly cloudy conditions.

View the complete list of icons at www.AcuRite.com/acurite-icons.

Barometric Pressure

Subtle variations in barometric pressure greatly impact the weather. This weather center displays the current pressure and indicates the direction the pressure is trending (FALLING, STEADY, or RISING). The history chart lets you monitor the change in pressure over time.

Humidity Level Icon

The Humidity Level Icon easily conveys a low, high, or ideal indoor humidity level for your home and health:

• LOW Humidity Level: Humidity is low relative to temperature. Makes for a DRY environment.
• OK Humidity Level: Humidity is OK relative to temperature. Makes for an IDEAL environment.
• HIGH Humidity Level: Humidity is high relative to temperature. Makes for a HUMID environment.

Learn more at http://www.AcuRite.com/humidity-health.

Troubleshooting

Troubleshooting - Continued

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt, and moisture. Clean ventilation ports regularly with a gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Replace Intelli-Time Clock Battery

Intelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. To replace the Intelli-Time battery:

1. Locate the coin cell battery compartment door on the back of the display unit. Unscrew and remove the compartment cover.
2. Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with "+" positive terminal facing OUT.
3. Screw in the battery cover.

Diagram Description: Shows the back of the display unit with the battery compartment cover removed, highlighting the CR2032 battery and its positive terminal.

WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF SWALLOWED, IT COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS. SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED. ☠️

Specifications

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.

Customer Support

AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways:

• Phone: (877) 221-1252
• Email: info@chaney-inst.com
• Website: 24/7 support at www.AcuRite.com

Support Resources:

• Installation Videos
• Instruction Manuals
• Replacement Parts
• Register your Product
• Support User Forum
• Submit Feedback & Ideas

IMPORTANT: PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE

Register online to receive 1 year warranty protection at www.AcuRite.com.

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase.

We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.

Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney's products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For in-warranty claims: Chaney Instrument Co., 965 Wells St., Lake Geneva, WI 53147.